Woodworking Equipment For Sale

RITTER R-30RP Raised Panel Door Shaper(3) Shaper Spindles mounted in a precision ground worktable (68" X 52" Deep X 36" Working Height ) Designed for running raised panels, as well as style & rail material for raised panel doors. -- Preset Spindle Locations, Equipped with (2) 5 H.P. Spindle Drive Motors On Right And Left Spindles, and (1) 7.5 H.P. Spindle Drive Motor At Center Spindle. -- The 1-1/4" Diameter Variable Speed Spindles are driven with Micro-V Belts. 5-1/2" max. cutter dia. -- 1st Spindle: 2" high x 12" wide max. tenon. 2nd Spindle: Setup for shaping of raised panels. 3rd Spindle: Setup for machining of style & rail and outside lip of door. -- Complete with: Micro Adjusting Fences, Miter Gage Slot at Right Hand Spindle (3/4" W X 3/8" Deep), Dust hoods (3 - 4" Connections), and Door Interlock Safety Switches.Suggested Options -- H154: PANELCRAFTER 24" Capacity Panel Jig, with 2 Cylinders. -- Jigs float on a cushion of air for smooth, easy operation. Proven design for years of trouble free use. Single thumb lever activates floating and clamping cylinders. Use with material thickness up to 2" thick. Self centering mechanism, and Variable flotation regulation. Large hand grips help operator control work piece. Change door style by simply changing the templates using a wide range of template designs and sizes. This Option requires 2 CFM at 80-100 PSI of supplied air.- R10TESA: Coping Attachment -- Fits any 3/4" by 3/8" deep slot, 2" X 12" capacity, with (3) Adjustable hold down clamps.- H161: Power Material Feeder, with reversing. -- (3) 20mm Rubber Rollers, 1HP Motor, 8 Adjustable Speeds (6,13,18,21,36,42,54,102 FPM)

High quality American made fixed spindle Shaper. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. -- Interchangeable spindle with lock for easy tool change. -- (8) Spindle speed settings for a variety of size cutters. -- Spindle reversing switch as standard. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Electronic digital height display. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Emergency stop. -- Operations manual, parts list & tool kit.

RITTER R-20 Double Spindle Shaper:High quality American made fixed spindle Shaper with (2) Spindles. -- Fabricated steel base with precision ground built-in cast iron table. -- Table insert rings to easily accommodate a wide range of cutterhead dia. (4-1/2" max. opening without rings). -- (2) Solid 1-1/4" spindle with lock for easy tool change. -- (2) Spindle speed settings for a variety of size cutter sizes and Spindle reversing switch. -- Standard 3/4" x 3/8" groove in table for miter gauge (not included). -- Large hand wheel for manual spindle height adjustment. -- Micro-adjustable fence that easily adjusts for short runs. -- Large cabinet style door for easy access to motor & quill assembly. -- Self-braking motor and Emergency stop. -- Magnetic starter & thermal overload switch. -- Integrated dust shroud & spindle guard assembly with manual holddown. -- Operations manual, parts list & tool kit.

36" X 72" Work table area, 24" door width & unlimited door length capacity. Capable of producing a complete raised panel detail in one (1) minute. Routers are guided by the fences or templates attached to the fences. -- Equipped with: (4) 3" Bore AC 20 clamp cylinders; (4) 1-1/2" x 1-1/2" adjustable fences; (2) 1.5 HP router motors with dust hoods; (1) 7/8 HP router with dust hood; and (1) 1475-H Heavy Duty 3-1/2 HP Hogging Router w/ cutter & dust hood. -- Complete with: 1475-A Tooling set, template guides; regulator and gauge; and (4) 2-1/2" dia. X 8' long flexible dust collection hoses.

RITTER DR-3553 Profile Sander2 HP TEFC Motor with direct drive spindle which tilts 90° forward & 20° backward.Specifications: -- 400 - 1,800 RPM Inverter controlled variable speed with RPM display. -- 4" Vertical & 8" horizontal spindle adjustment. -- 36" x 33" Solid northern hard maple tabletop and 36" table height. -- 1-1/4" Dia. x 4" long spindle to accept standard sanding discs and profile discs made to customer's specifications. -- Enclosed fabricated steel base. -- Dust hood w/piano hinge for easy ascess to sanding disc. -- Stationary fence and large hand wheels for easy spindle adjustment.

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

Designed for machining of beaded face frames, cabinet doors and related joint construction. The machine miters all required corners and notches without the need to change a set-up. -- Production time is reduced to seconds with the use of the 6,500 RPM cutterhead capable of machining (2) parts at the same time. -- Standard Features: 7.5 HP spindle drive motor, 40 MM diameter 6500 RPM spindle, 7" maximum cutter head diameter, Adjustable pneumatic cutter head feed stroke, 60" stile & rail alignment fence, 16" material width capacity, (8) quick reference material fence alignment stops (6) quick reference fence offset stops, (4) hold down clamp cylinders. -- 48" wide table with 34" fixed work table height, magnetic controls, foot pedal controlled machining cycle. -- Tooling Options Sold Separately ($4,500): 7/8" Cutter head pattern, 5/16" bead carbide tipped, 1" cutter head pattern, 5/16" bead carbide tipped. Custom pattern heads upon request. -- Additional Options: 72" & 84" alignment fences, additional fence offset stops, additional fence stops. -- 4" diameter dust outlet. Weight: 1,430 lbs. -- This machine is also available with a 5 HP 220V single phase motor at the same price.

Ritter 3 Spindle Boring Machine

CR 3553 profile sander 2 HP TEFC Motor Direct drive spindle which tilts 90° forward & 20° backward

3/4" Dia. spindle, 3HP drive motor, 27" x 28" cast iron table with miter slot, Adjustable Fence with Dust Hood.

1-1/4" Spindle, 7.5 HP motor, spindle brake & lock, 7-1/2" vertical spindle travel, spindle speeds 2,800 - 4,500 - 6,000 - 8,000 - 10,000 RPM, table size 36" x 43".

ROCKWELL/SCM - T160, ...Tilting Shaper --1-1/4" Dia. interchangeable spindle, 9 HP belt drive motor with: (5) Spindle speeds of 2,900, 4,400, 6,000, 7,800, & 10,000 RPM. -- Features: 8" Max. cap. under nut; (3) table insert rings; 13-1/2" max. insert opening; 47" x 28-1/2". -- Includes: Cast Iron table w/slot for miter gauge; MAGI Stock Feeder.

---In Auction---NO RESERVE---Single-Phase--- RODGERS 800 2-1/2" W x 22" Face Form/Edge Belt Sander Specifications: - Abrasive belt size 2-1/2" W x 80" L. - Belt speed 2,800 FPM. Equipped with: - 3" W x 22" L Straight platen. - Form block. - (2) 12” x 30” x 3/4” Thick Wood tables, with Tilt: Approx. 30° & Vertical adjustment 2". - 4” W x 8” Dia. Spiral rubber-covered aluminum driven drum, 2-1/2” W x 6” Dia. Aluminum ider drum. - 3/4 HP - 1,725 RPM Motor. - Weight without Stand: 170 Lbs. Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/SS-230668/event/A051324$1

ROSE GBUB-80 Glue-Bound Unit Breaker. Machine breaks the glue bond in a staggered stack of finger jointed material - see picture of material with the checkerboard end pattern. --Features -- Equalized Hydraulic squeeze, provides uniform load compression. --Hydraulic length change. Air operated Locking Pins on the Backstop Platen. --Backstop platen position indicator. --Simple manual controls for load length adjustment and crushing stroke on the control panel. --Heavy Duty Structural Steel Construction, Ease of Maintenance and Simple Operation (no cables).Does not use cables!Specifications: --Maximum opening is 16’-10"; for a single 4' x 4' x 16' unit. --Backstop Platen locks at 12" increments (2' minimum load length) --Pressure Platen, hydraulic actuated with 18" stroke. --Platen size 5' x 5' --5 HP Hydraulic Unit with a Pressure Compensated Pump (approx. 1 minute squeeze time) --Overall size approximately 5' x 25' x 7' high --480 VAC, 60 hertz, 3 phase, 30 ampsOptions: --10 HP hydraulic unit with approx. 30 second squeeze time, add $4,200 --Double unit capacity; crushes (2) 4' x 4' loads with 5' x 10' platen, add $19,700 --Automated Control Package with 2 Remote Controls for initiation of Pressing Stroke; Automatic open and hydraulic shut down; PLC Controls, automated load length adjustment with lighted indicators, add $ 7,400

ROSE BPUDH BOX, PALLET & UNIT DUMPING HOISTDescription: --Box, Pallet & Unit Dumping Hoist, for dumping one load at a time. --The hoist will be fabricated from steel tubing with a box cradle that pivots at the top. The three sided cradle will hold the box, pallet, or unit when it is pivoted up 135 degrees to the final dumping position. --A pair of replaceable forks hold pallets in place in the cradle. --The cradle will be pivoted by a hydraulic cylinder driven by a 3 HP hydraulic pump. The hydraulic cylinder is manually energized by the operator with foot switches. --Manufacture will supply all mechanical equipment, electric powered hydraulic pump, and two foot switches. --Cradle opening is: 168";L x 60";W x 60";H.Payment Terms: --50% with order, 40% prior to shipment, and the balance 10% net 30 days after receipt of equipment. Delivery is subject to the order file at the time the order is placed.Lead Time: --Delivery can be made in 12 weeks ARO at this time.Conditions: --The fabricated frames and appropriate parts of the items in this quotation will be painted with one coat of industrial grade Shady Lane Green enamel. Guards and appropriate moving parts will be painted Safety Orange. All gear-motors, mechanical equipment, limit switches, sensors or photoelectric devices as required for each item of this quotation, will be supplied and mounted. All pneumatic cylinders or other pneumatic power devices and their valves will be supplied and mounted. They will have connecting hoses and fittings installed. Filter/Regulator units will be supplied, mounted and connected by hose to the valves. Compressed air service to equipment is by others.Exclusions: --This proposal describes the machinery to be provided by Rose Machinery Inc. to the Buyer. The equipment supplied by Rose Machinery Inc. is specifically limited to the items actually described in the itemized detail pages of this quotation. Unless specifically mentioned herein, all other items and services are the responsibility of the Buyer. We do not include any state or local sales taxes, or any permit or other fees that may be required. All field wiring, plumbing, and installation is not included. Warranty: --Rose Machinery Inc. d.b.a. Complete Millwright Services, warrants all products of its manufacture to be free of defects in material, and workmanship, for a period of one year from date of shipment. Equipment provided by other manufacturers and incorporated within equipment manufactured by Rose Machinery will be warranted to the extent of the warranty provided by the respective manufacturer. Rose Machinery agrees to repair, or replace, at its option, any component found to be defective provided the purchaser promptly notifies Rose Machinery of the defect. Rose Machinery shall not be liable for incidental or consequential damages arising from said defective material. No other warranty written or implied is offered beyond that stated above unless specifically written and signed by an authorized a

For dumping (1) load at a time. Hoist is fabricated from steel tubing with a box cradle that pivots at the top. The cradle holds the box as it is pivoted up to 135° to the final dumping position. The cradle is pivoted with a hydraulic cylinder driven by a 3 HP hydraulic pump. The cylinder is manually energized via operator foot-switches. -- System includes all mechanical equipment, electric powered hydraulic pump, and (2) foot switches. All wiring and controls by others. ~ Accepts a standard 96" long X 60" wide X 60" high box.

For dumping (1) load of fingerjoint blocks at a time. Hoist is fabricated from steel tubing with a box cradle that pivots at the top. -- 3-Sided cradle will hold the box or pallet when it is pivoted up to 135° to the final dumping position; cradle opening is 88" long X 48" wide X 50" high. -- A pair of replaceable forks hold pallets in place in the cradle. The cradle is pivoted by a hydraulic cylinder driven by a 3 HP hydraulic pump. The hydraulic cylinder is manually energized by the fingerjointer operator with foot switches. -- Scope of supply includes all mechanical equipment, electric powered hydraulic pump, and two foot switches. All wiring by others.

For dumping (1) load of fingerjoint blocks at a time. Hoist is fabricated from steel tubing with a box cradle that pivots at the top. -- 3-Sided cradle will hold the box, pallet, OR unit when it is pivoted up to 135° to the final dumping position; cradle opening is 88" long X 48" wide X 50" high . -- A pair of replaceable forks hold pallets in place in the cradle. The cradle is pivoted by a hydraulic cylinder driven by a 3 HP hydraulic pump. The hydraulic cylinder is manually energized by the fingerjointer operator with foot switches. -- Scope of supply includes all mechanical equipment, electric powered hydraulic pump, and two foot switches. All wiring by others.

This machine will be available around September 1 2020.

2004 Routech 4 axis CNC machine. Manuals and all the spare parts included. Call 800-459-2148 for more info.