Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 73
1453 Results Found
Sort By 
Recently Added Items
2005 D M C TOPSAND K TSK 135MS
$51,750
2005 D M C TOPSAND K TSK 135MS
Timesavers 2321-24-01
$21,890
Timesavers 2321-24-01
1998 Timesavers 137-3 HP75
$22,750
1998 Timesavers 137-3 HP75
2001 D M C UNISAND 2000-M2
$41,500
2001 D M C UNISAND 2000-M2
PREMIUM LISTINGS
2015 Guangzhou Hessan PUR Automatic Floor Laminating Line  Glue Equipment
$75,000

Guangzhou Hessan Woodworking Machinery Co., Ltd, HY-F-350 PUR Automatic Floor Laminating Line, 480 Volts 60Hz 3-Phase Lamination width: upto 350mm Thickness: 3-25mm Speed: 3-10m/min Dimensions: 6.8' High x 5' Wide x 72' Long Machine can laminate up to 17' long

 Hammond, IN
Brenco LLC
312-543-6505
Call

MZ Project Hopper 013  Bandsaw
$9,800

Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 x 1,200 x 100 mm (78.7" x 47.2" x 4"); height of cut is from 0 - 100 mm (0" - 4") - Call for more details and similar equipment

 Jasper, IN
Machine Solutions, LLC
812-639-3527
Call

1985 Weinig U22A  Moulder
$7,500

1985 Weinig U22A Moulder, All Electrical, Just Taken out of Service, Was Working Daily, Delivery Available! $7,500 obo 585-335-5879/585-329-5875

 Dansville, NY
Dansville Logging & Lumber
585-335-5879
Call

Yates A20  Planer
$5,500

Yates A20 8” x 12” Planer, 6 head, motors needed and TLC needed for rebuild or used as parts machine, $5,500 – 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

Yates-American A20  Planer
$10,000

Yates A20 8” x 12” Planer, 5 head w/ top bracket, running condition, $10,000 - 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

STANDARD LISTINGS
1996 Homag CH 12/32/32  Panel Saw
$11,000

HOMAG CH 12/32/32 Front Load Auto. Panel Saw -- Cutting length 3,200 mm (126"), pusher stroke 3,200 mm (126") behind cutting line, max. 400 mm (15.8") dia. blade, 100 mm (3.93") saw blade projection). -- Features: 8.9 kW (12 HP) Motor for main & 1.1 kW (1.5 HP) for scoring blade, 3,900 RPM main & 5,300 RPM scoring blade, saw carriage travel 6 - 32 MPM (20 - 105 FPM), return speed 32 MPM (105 FPM), powered by .55 kW (.75 HP) motor. -- Automatic carriage return (no programming). Sensor indicates when saw is through cut and blade retracts & carriage returns. Pusher fence with (6) grippers, feeds from 1.0 MPM (3.3 FPM) slow forward to 24 MPM (80 FPM) fast, 32 MPM (105 FPM) return speed, powered by DC Servo motor and travels on hardened round steel guides. Twin profile rear table supports with super glide surface aluminum rails. -- HOMATIC "NC 16" Controller with LCD display, featuring a user friendly operating menu, handles (4) different languages; data entry by keypad or directly possible via cable from a PC, stores up to (99) cutting patterns with up to (20) sizes for a total of (800) lines, repeatable (99) times. -- Complete with: Full length crosscut fence, pneumatic side aligner on both sides of cutting line with a stroke of up to 1.778 mm (70"); pneumatic pressure beam with (5) pneumatic holddowns for last cut. -- Includes: (3) Air tables 24.3" x 72" (620 x 1,830 mm), each with its own high volume blower; safety curtain & safety bar cutting line cover; safety panels enclose rear saw table area.

Jim Reedy
800-374-5009 ext:455
Call

2000 Homag CH 12/38/38  Panel Saw
$12,900

HOMAG CH 12/38/38 CNC Front Load Panel SawCutting length 149" (3,800 mm), pusher stroke 149" (3,800 mm) behind cutting line for crosscuts, 3.93" (100 mm) saw blade projection; max. 400 mm (15.8") dia. blade. -- Specifications & features: 12 HP Main saw motor & 1.5 HP (1.1 kW) scoring motor, 3,900 RPM main & 5,300 RPM scoring blade. -- Saw carriage travel 6 - 32 MPM (20 - 105 FPM), return speed 32 MPM (105 FPM), powered by .55 kW (.75 HP) motor; automatic carriage return (no programming), sensor indicates when saw is through the cut and blade retracts & carriage returns. -- Equipped with: Pusher fence with (6) grippers, feeds from 1.0 MPM (3.3) FPM slow forward to 24 MPM (80 FPM) fast, 32 MPM (105 FPM) return speed, powered by DC Servo motor and travels on hardened round steel guides. -- HOMATIC "NC 16" Controller with 10" video display & featuring a user friendly operating menu; capable of programming in (4) different languages; data entry by keypad or directly via cable from a PC is possible; stores up to (99) cutting patterns with up to (20) sizes for a total of (800) lines, repeatable (99) times. -- Complete with: Full length crosscut fence, pneumatic side aligner on both sides of cutting line with a stroke of up to 1,778 mm (70"); pneumatic pressure beam with (5) pneumatic holddowns for last cut. -- Includes:(3) Air Tables 24.3" x 72" (620 x 1,830 mm), each with its own high volume blower; safety curtain & safety bar that cover the cutting line; safety panels enclose rear saw table area.

Jim Reedy
800-374-5009 ext:455
Call

2004 Homag BOF 611  Router
$69,750

HOMAG "BOF 611/34/13/2R" twin tables with C-axis ATC & boring:CNC Machining:The working unit is moving tables in the left to right configuration that can work in tandem or independently of each other. -- "BOF 611" Working axis strokes: For single panel processing with "X" axis 4,935 mm (194"), "Y" axis 2,500 mm (100"), "Z" axis stroke 600 mm (23.6"). -- "BOF 611" Positioning Speed:"X" & "Y" Axis 60 MPM (197 FPM), "Z" axis 30 MPM (98 FPM); AC Brushless Servo motors with digital drive & linear guides ensure high speeds with a smooth acceleration & deceleration. -- "BOF 611" Working tables: Tables consist of (2) 72” X 61” or locked together 144” X 61. Each with (4) positioning pins. -- "BOF 611" Machining Unit:(1) 16 HP C-axis (12 kW) Liquid cooled electro-spindle Router at 1,00 to 24,000 RPM with "HSK F63" adaptor; NC controlled "FLEX5" "C" axis for 360° horizontal processing (1) 12-position "on the fly" tool changers. -- "BOF 611" Boring Unit:(1) 1.5 kW (2.7 HP) Motor; variable speed from 4.500 - 7,500 RPM; 18-spindle unit with 12 vertical in L shape with (6) horizontal spindles. -- Control:Homatic control PC Front-End with HOMAG "Power Control PC 85" + Windows "XP" + "WOODWOP 5.0 + "FLEX5"" operating system; icon driven software with graphic interface to allow the operator to quickly and efficiently create programs. -- Control includes: 1.44 MB Disk drive, CD/RW drive; 17" TFT flat screen monitor; Ethernet network connection; RS-422 Serial & USB connection to PC (up to 300 meters); (2) line adaptors RS-232 & 485.2 with 9-25 pin and card for RS-232 line (cable not included). -- Control Features:Multitask operating system, input/output modules, axes override, 4-axis interpolation, and diagnostic graphics aid for programming, machine data & tool management. Editor Module for office PC with same look and functionality of software on the machine, allows transmission of programs and work lists. -- Complete with: (1) 40 HP DEKKER Liquid Ring vacuum pump,.Hand held pendant; user & maintenance manuals on CD with wiring diagrams and operation of Numerical Control; system complies with EU/CSA/UL safety standards. -- Actual Model is HOMAG "Optimat BOF 611/34/13/2R".

Norm Schust
800-374-5009 ext:445
Call

2015 Homag BMG Venture 316  Router
Call for Price

Manufacturer specs (to be confirmed): Heavy duty 5-axis Drive 5C router spindle for routing, drilling and sawing, HSK 63F Spindle, 12 kw (16 HP) 16-Spindle (V12 + H4) Drilling Unit: 2.2 kw Motor, programmable to 7500 RPM for quick processing 14-Position HSK-63F Plate Type Tool Changer Tool Transfer for BMG Saw Tool Chuck Device for Drive Saw Blade for Cutting K-Type Vacuum Fixture Console Table This system is still installed and ready to be removed.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

2006 Homag Optimat  Router
Call for Price

The BAZ is a machining center for routing, drilling, contour edgebanding and edge finishing. The machine features (2) independent The machine features two (2) independent Y-axes for main spindle and gluing unit 360º with coil and strip feeding. These independent axes enable quick cycle times utilizing simultaneous tool changing while processing. Basic Equipment K-type vacuum bench consoles with lifting rails and LED bench and vacuum cup setup aid Power control with PC85 Main spindle 14.5 Kw (19.4 HP) vector regulated Plate-type tool changer for twelve (12) tools Model: Homag BAZ 322/40/K

Carolina Machinery Sales, Inc
704-288-1904
Call

2002 Homag SAWTECH CHF 325  Panel Saw
$21,900

HOMAG SAWTECH OPTIMAT CHF 325 CNC Panel Saw. -- Cutting length: 3,800 mm (144"), pusher stroke 3,800 mm (144"), 72 mm (2-7/8")" max blade projection with 350 mm (13.7") dia. blade. -- 12 HP (9.2 kW) Main & 1.5 HP (1.1 kW) scoring motor, 4,750 RPM main blade & 5,100 RPM scoring blade. -- Equipped with: Saw carriage travel of 0 - 197 FPM (0 - 60 MPM) & return speed of 197 FPM (60 MPM), powered by electronically controlled AC inverter drive; quick blade changes facilitated by large acess door & "Power-Lock" quick release system. -- Automatic cutting height in 5 mm increments via sensor in the pressure beam, automatic cutting length controlled by optical sensor, which detects the blade is through the cut; automatic programmable grooving to a height of 30 mm. -- Programmable pusher fence with (6) material grippers; 0 - 82 FPM (0 - 25 MPM) forward speed & 82 FPM return speed, AC inverter driven, center-mounted Servo motor with rack & pinion system; precision assured through dust & friction free no-contact magnetic measuring system. -- The CHF 325 PC Controller with: WINDOWS XP Operating system, 2.39 GHz/256 KB, with 256 MB ram, 40 GB hard drive; "PC-Connectivity" software; 56 kb modem; 15" Full color graphics monitor, optical mouse & standard keyboard for data entry. -- On-board basic "Easy Cut" optimizer organizes up to (15) pieces from (3) different materials; ability to upgrade to remote optimizing system and/or label printer. -- Complete with: (3) Air floatation tables 23" x 72" (individually selectable), with a common blower and front loading rollers each table; 4" - 51" stroke automatic dual side aligner holds strips against right angle fence; safety curtain & safety bar cover blade cutting line w/saw blade.

Jim Reedy
800-374-5009 ext:455
Call

Hot Melt PROFLEX G4  Glue Equipment
$5,900

HOT MELT TECHNOLOGIES "PROFLEX G4" Hot Melt Applicator with Dual Guns. -- Tank Heaters rated for 100 F to 475 F with up to 90 lbs. / hour melt rate. -- Pump rate up to 150 lbs. / hour with Steel Spur Gear for Positive Displacement for Dual Guns with heated hoses. -- Viscosity Limits: Up to 1,000,000 cps -- Includes: Optional stand, cart with casters.

 WEST COAST, AL
EX-FACTORY INC.
704-841-2001
Call

Houfek MAXX SPB 1100 RC  Sander
$27,000

HOLFEK MAXXSPB 1100 RC Wide Belt Sander (2) Heads43" Width cap. Drum, Combinations HeadHead Configuration1st Head: 9-1/2" Dia. rubber covered contact roll, 25 HP motor2nd Head: (3) position Combination head with 20 HP motorSpecifications: --Working with the 1st Head being a 9-1/2" Dia. rubber covered contact roll, 25 HP motor and able to be adjusted to (3) different positions via the Color Touch Screen Control Panel, --The 2nd Head using a (3) position Combination head controlled by the touch screen, and uses a rubber covered contact roll, 9-1/2" Dia with a 2" pneumatic finishing platen (with 2 positions) and timers to control the platen inflation and deflation to keep it from rounding your parts, and has a 20 HP motor --43" x 103" Abrasive belts, and infrared sensor belt tracking. --2 HP variable feed speed from 10 - 40 FPM, --Endless belt conveyor with automatic tracking. --Constant pass line with motorized part thickness opening with the readout on the controller and a vacuum hold-down bed using a 8 HP blower --Thickness opening is 0" - 6"Equipped with & Features --Anti-dubbing for veneer sanding --Infeed and outfeed rubber covered holddown rolls, infeed over thickness bar --Emergency stops at infeed & outfeed --Air operated disc brakes on sanding heads --Electrical interlocks on main access doors, and motor load meters --(2) 6" dust collection ports needing a total of 2,200 CFM.

Joe Retzlaff
800-374-5009 ext:348
Call

2004 Hundegger Speedcut SC-1  Router
Call for Price

This system is no longer needed at the current facility. Includes: Waste conveyor, resolver mill, ink jet printer and misc spare parts.

Carolina Machinery Sales, Inc
704-288-1904
Call

2008 Hundegger WBS 120  Router
Call for Price

Weinmann Saw Center Model WBS 120/6: 5-Axis Optimizing saw and router. 0-360 Degree Rotation 0-90 Degree angle of inclination Extraction volume: 1800 m3/h 30 HP Saw Motor More specs and info coming This system is no longer needed at the current facility.

Carolina Machinery Sales, Inc
704-288-1904
Call

2019 Hydrex AM-63/4  Glue Equipment
$18,900

HydrEX - AM-63/4, ... Glue Spreader: 63" Cap., Top & Bottom Coater for direct application of coatings or adhesive. -- 9-1/2" Dia. rubber covered application rolls, grooved at (13) grooves per inch, flow controlled with stainless steel doctor rolls. -- (2) 1 HP Motors drive both the top & bottom rollers at a variable speed from 16 to 70 FPM. Upper elevator opening from 0" - 4-3/4" with single handwheel adjustment. -- Complete with: Safety emergency stop systems and roll guard hood. -- Dimensions: 99" x 36" x 57", weight approx. 2,310 Lbs.

Torry Hiddema
800-374-5009 ext:371
Call

2002 I D M IDIMATIC/49-5 QMS  Edgebander
$4,500

IDM IDIMATIC/49-5 Edgebander with Corner Rounding -- 7 mm (1/4"+) Cap. edgebanding and 10 mm - 50 mm panel thickness; "function & line control" with microprocessor. Equipped with: -- Automatic strip & coil feed magazine with 3 mm PVC guillotine (9" pack cap. for strips), --8.8 Lbs cap. overhead granular glue "Quick Melt" hopper feeding compact size, Teflon coated lower applicator glue pot, 1" dia. glue applicator roller, reversible rotation by flip of switch; -- Pressure section with (1) large dia. (7-7/8") clutch controlled drive roller and (3) jump-action, pneumatic pressure idle rollers, horiz. adj. w/digital indicator. Workstations: -- "IN 97/5" Front & rear end trims (motors 0.75 HP each - 14,400 RPM), motors tilt pneumatically 0ø - 15ø on horiz. plane; -- "RSG/0.5" top & bottom rough trims (0.75 HP - 14,400 RPM motor ea.), digital readout for easy setup; -- "RSM/05" multi-function top & bottom fine/radius trims (0.75 HP - 14,400 RPM motor ea.), bevel 0ø - 30ø, digital readout for easy setup (station prepared for "quick change" of motors); -- "PR/2M-R" 2-motor (0.75 HP - 14,400 RPM ea.) corner rounding station w/THK guide ways, for T & B of leading & trailing panel edge; -- "RAS/S20" top & bottom scrapers for up to 5 mm thick PVC banding, pneumatic pressure control for scraping knives, overhead PVC chip filter unit eliminates PVC chips being sucked in by dust collector; -- "SP" top & bottom buffing (0.3 HP - 1,680 RPM); -- "RB/ID" hot air blower, color restoration unit. -- Feed chain with "anti-slip" 80 mm wide rubber pads, (2) feed speeds 40 & 60 FPM, with 3 HP/4.5 HP drive. Complete with: -- Insulated sound enclosure over all trim stations, -- Rotating operator control panel at eye-level height, electronic brakes on all trimming heads, multi-function trim, scraper & hot air blower w/pneumatic positioning, pneumatic space control for panel spacing,

Ed Webb
800-374-5009 ext:377
Call

2000 I M A HKA  Edgebander
$3,950

IMA - HKA, ...Contour Edgebander.Manually operated curved Edgebander that comes with (2) heads, which is a big plus. -- Designed for straight or curved (contour) edgebanding with: 0.5 - 3 mm Edgebanding thickness, 16 - 45 mm panel & banding height, 23 - 45 mm min. strip width; 100 mm min. panel width; 250 mm min. strip length. -- Features: 0.5 Liter cap. "floating worktable" head/glue pot unit (hot melt); guillotine knife for PVC material (within floating head) internal/external radii. -- Process: Floating edgebanding head is clamped to panel to be processed, precut strip of edgebanding material is fed into glue head, operator guides head around workpiece, glue is directly applied to precut strip of edgebanding material up to end of strip. -- Equipped with: Versatile glue head can be fixed to 1-side of the table allows operator to manually manipulate smaller pieces. During "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine. -- 32" (800 mm) Dia. coil dispensing table, large worktable surface (approx. 36" x 36"); preselection counter for edgebanding material; (1) vacuum pump with 6 cbm/Hr cap.; (1) preheating unit with 600 Watts for preheating of PVC/ABS edges. -- Complete with: Thermo-control for glue temperature; foot pedal control to initiate automatic cycle. -- NOTE: This machine does not include a jib crane.

Ed Webb
800-374-5009 ext:377
Call

2013 I M A ADVANTAGE 500 L  Edgebander
$68,000

IMA Advantage 500 L ... Production Edgebander With Pre-Milling & Corner RoundingBasic Specifications:Edgebanding capacity, Coiled material 0.3 - 3 mm; (0.012 - 0.118"), strips 3.0 - 12.0 mm (0.118 - 0.472) panel thickness min/max 8 - 60 mm (0.315 - 2.362").Equipped With: -- Pre-Milling Unit 08.379, with kW 4 x 2 (HP 5.3 x 2) 9,000 RPM vertical joining spindles, with SIKO digital readouts, particle & debris air jet blower. -- Glue System "EVA" (Hot Melt) with "quick-look" system and automatic granulate glue feeding from granulate glue supply drum. -- Pressure Roll Section with (1) large dia. driven and (5) idle rollers. Workstations: -- End Trimming Unit 08.415: Dual motor kW 0.66 x 2 (HP 0.88 x 2) suspended from the hold-down beam, automatic chamfer adjustment 0° - 8°. -- Rough Trimming Unit 08.055: Top & bottom flush trimming, W 1.000 x 2 (HP 1.34 x 2) - 12,000 RPM ea. motor, against the feed (up-milling), vertical & horizontal tracing wheels, digital readouts for adjustments. -- Contour Unit CTU-L: Multi-use, top & bottom linear and vertical corner trimming, total motors (4), 2 x 180 W and 2 x 400 W, 12.000 RPM. -- Profile Scraper Unit 08.519: Profile scrapers for up to 3 mm thick PVC banding, vertical & horizontal tracing shoes. -- Glue Scraping Unit 08.521: Flat, top & bottom self-tracing glue scraper. -- Buffing Unit 08.617-2: Top & bottom kW 0.18 x 4 (HP 0.25 x 4) - 1,400 RPM. -- Open Space for adding Edge Smoothing Unit.Complete With: -- Control System ICOS OPEN TS, large color LCD display; displays stored data, on/off work station sequence, troubleshooting diagnostic; data input by touch screen, alphanumeric keyboard and mouse. Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations. -- Heavy Duty "sliding" feed chain with 70 mm wide x 60 mm long rubber pad inserts, central lubrication of transport chain, variable feed speed 4 - 20 MPM (13 - 65 FPM); -- Motorized central height adjustment of top pressure beam with double V-belt hold-down. -- Sound enclosure, all stations, all trimming & milling motors DC electrical motor brakes for immediate stopping. -- Spraying Units, up front at in-feed for anti stick solvent and polishing solvent prior to Buffing Station. Note: -- DOUCET Return Conveyor is not for sale!

Karl Balg
800-374-5009 ext:355
Call

2000 I M A ADVANTAGE 5620  Edgebander
$12,750

I M A Advantage 5620 Edgebander.0.4 - 12 mm (1/2") Edgebanding thickness cap., 14 - 55 mm panel thickness, 65 mm min. panel width & 150 mm min. length; automatic magazine for coil, strip & solid edgebanding, HD reinforced guillotine for 3 mm PVC. -- Rapid melt glue system with hopper feed, electronic temperature control and separate applicator roll drive. -- 5-Roller pressure section with (1) large drive and (4) idle rollers, all pneumatically controlled. -- Microprocessor control and line control for workstation function.Equipped with: -- (2) Pre-Milling heads with 4 HP - 12,000 RPM motor ea. 200 Hz, both w/jump movement and reversible rotation, SIKO digital readouts, particle & debris air jet blower followed by infrared heating zone for panel edge.Workstations: -- Double motor end trim (0.6 HP - 12,000 RPM motors), adjustable 0° - 20° for chamfer cuts. -- Top & bottom flush/radius trimmer (2) 2.5 HP - 12,000 RPM ea. 200 Hz) -- Multi-purpose "MMU" unit acts like a second Fine trimming unit; fine or radius trimming of top & bottom longitudinal edge (0.88 HP - 12,000 RPM ea. 200 Hz). -- Top & bottom profile scrapers for up to 3 mm thick PVC banding, SIKO digital readouts for easy setup (currently set up with 3 mm Radius tooling). -- Top & Bottom glue scraping station; last station: Top & bottom buffing unit (0.33 HP - 1,500 RPM ea. motor) tilts 0° - 30°. -- Siemens SPS AG 95 controller to operate all working stations and machine line control; feed speed 16 MPM (52 FPM). Complete with: 5 KVA (200 Hz) Frequency changer, 80 mm wide track pads, sound enclosure w/interior lighting over all milling units.

Ed Webb
800-374-5009 ext:377
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved