Woodworking Equipment For Sale

WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays

Weinig R960 Profile Grinder Measuring Stand Complete tooling room included!

Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room

2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.

Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l

Weinig Rondamat 934 Grinder

1996 Weinig Hydro-Mat 23 (6) head moulder w/ control station and hydraulic power unit, S/N 023-2386, (8) 9.5”, (6) 6 3/4”, and (19) 2.5” heads, all but (4) with knives (most 6 knives per head), includes head and knives currently installed on moulder w/ outfeed 18” C14.5 belt conveyor and drive w/ toolbox w/ misc. knives, templates for knife & other misc. W/ Weinig (9) strand infeed table S/N 314-LCF/16 w/ hydraulic power unit w/ blow, $20,000 without tooling (ref # 162) Call Amy for more information (928) 723-9449

2023 Weinig Powermat 7000 Bought new $120k 460V

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig Powermat 400 Moulder HSK heads Radial and axial head controls Still under power and available for inspection.

Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

Weinig R950 Profile Grinder

Weinig Powermat 500 Moulder MFG Specs: 460V; ELECTRONIC "SMART" BRAKES; POWERCOM+TOUCHSCREEN; MODEM FEED ELECTRONIC 7.5HP; #1:BOTTOM 10HP; 8000RPM; 1 13/16 SPINDLE; TABLE PLATES HARDENED B4 #2:RIGHT 15HP; 8000RPM; RAD ADJ; #3:LEFT; 15HP; 8000RPM; PRESS SHOE W/2 LATERAL PRESS ROLLERS SPR MT #4:TOP 25HP; 8000RPM; REC CB; TBL PLT FOR WOODEN INSERT; PROFILE GUIDE AFTER; PL #5:BOTTOM 20HP; 8000RPM; TABLES/FENCES CHROMED:INFEED TABLE 1050mm; 1 POWERED ROLLER ; MAN-WAX; CL LUBE ELECTRICS:EL CAB + OPERATOR PEDESTAL SEPARATE PRESSURE:FIXED PRESSURE ROLLERS ABOVE SPRING MTD; PRESSURE ROLLER AT INFEED SAFETY: SAFETY INTERLOCK; 1 LIGHT INSIDE ENCL; STRAIGHT EDGE;2 CLAMPING LENGTH 240 mm/ DIA 1 13/16"; GUIDE EDGE AFTER LEFT TOOL HOLDER;

WEINIG 051 Single End Tenoner W Motorized Feed TableSpecifications: -- 2-Head Tenoner for cabinet and window parts. -- (1) Trim saw & (1) Stacked cope head, both direct motor drive, sliding table with fence line and (2) pneumatic hold downs, control panel and large asssortment of high quality tooling.Actual model is WEINIG 051

WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132” x 64” x 64”Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00

WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.

WEING U 23 E "STANDARD" Feed Through Moulder; (6) Heads, (B-R-L-T-B-U), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP, bottom 15 HP and universal 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed motor 5 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump. ALSO AVAILABLE: -- Weinig model 960 Grinder, sells new for approx. $35,000... Add $12,500 if purchased with the Moulder, -- CNC Template Maker, with scanner and DXF file capabilities, sells new for approx. $12,000... Add $3,500 if purchased with the Moulder.