Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 73
1455 Results Found
Sort By 
Recently Added Items
Yates C99
Call For Price
Yates C99
Delta 34-457
$2,100
Delta 34-457
2005 Oliver 4925
$5,200
2005 Oliver 4925
2019 Oliver 4430
$3,799
2019 Oliver 4430
PREMIUM LISTINGS
Diehl 55  Straight Line Rip
$8,500

Diehl Model 55 Straightline Ripsaw, Completely Disassembled & Gone Through, Works Great, 15hp-3 DD Motor, 2” Dia. Arbor, 16” Blade Capacity, 1/8” to 2 ½” Cut Depth, 2hp Feed Mtr., $8,500. 843-873-2071 - 19" width of table to the right of blade & 30" to the left Table size 56" long x 45" wide 2HP Feed Motor, Adjustable speed from 55 to 110 FPM Twin Chain Drive Automatic Drip Lube Top pressure system with 6 full width rollers & 2 split rollers over blade - We just had the machine completely disassembled gone thru heavily lubricated and reassembled to manufacturers specifications. It runs fine and everything works on the machine. It is very heavy and well built american machine! This machine is made to straight line rip lumber to make glue joints for table tops etc. We used it for straight lining lumber for a flooring plant. We can load for customer.

 Ridgeville, SC
Ashley River Lumber Company
843-873-2071
Call

Logosol PH-360  Moulder
$21,000

Logosol PH 360 Moulder w/Under 50 Hrs., 4 Sets of Flooring Knives, Second Set of Cutter Heads for Straight Knives, Dust Extractor & Filtration Bags, Multi Dust Port Attachments $21,000 obo 859-802-9178

 Covington, KY
CVG Made
859-802-9178
Call

STANDARD LISTINGS
2004 Leadermac LMC-623SP  Moulder
$29,900

LEADERMAC LMC 623 SP "SPEEDMAC" Moulder Through Feed; 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" cap.Head sequence: Bottom 20 HP, right 15 HP, left 20 HP, top 30 HP, top 25 HP and bottom 50 HP motors. Amp meters on spindle motors # 1,4 and 6.Spindles: Dia. 2-1/8" with cutterhead speed of 6,000 RPM. -- Spindles #2 - 6 with 7,200 RPM spindle speed. -- Spindles (all) equipped with mechanical digital readouts, digi-set readouts for left and top spindles. REC-705B Quik-Trueset system for top head positioning of all top heads. -- REC705B Quik-Trueset system for positioning of left spindle. -- Horizontal spindles with with Hydro-Loc outboard bearings. -- Chipbreaker and pressure elements include mechanical digital readouts for accurate positioning. Chipbreakers at left and top spindles with pneumatic pressure.Jointers: Profile jointers on spindles #2, 3, and 4; air controlled from outside the enclosure. Straight knife jointer on spindle #1.Feed works: 20 HP VFD drive with feed speeds of 20 - 400 FPM (120 MPM).Infeed table: 1.2 M (4'-0") Infeed table, lateral side pressure roller at infeed gate and "solid" chromed tables and fences, (4) full width driven adjustable infeed & outfeed table rollers in machine bed, lateral side pressure roller at infeed.Includes & Features: Central lubrication, automatic table lubrication, swing-away intermediate short piece gearbox opposite left spindle, protection against backlash when splitting.Full width driven adjustable infeed & outfeed rollers in machine bed, lateral side pressure roller at infeed gate, feed jog/inch forward at top spindle and operator tools & manuals. Dust collection spyder to fit machine "quick connect".

Bob Dykstra
800-374-5009 ext:378
Call

2012 Legacy ARTISAN 2  Router
$39,700

LEGACY ARTISAN 2 CNC Milling and Lathe Turning Center:30” X 96” Routing open frame area with a 15” x 96” turning area with 10” of Z-axis stroke; high performance motors with 110 VAC drives. -- Equipped with: (1) NEW COLOMBO 7.5 HP HSK spindle and with a (6) position wine rack tool changer. -- Welded steel frame:20 mm linear profile bearings and rails, X-axis and Y-axis rack and pinion drive, Z-axis precision ball screw drive with feed rates at X-axis -1,000 IPM, Y-axis - 1,000 IPM, Z-axis – 180 IPM and A-axis – 300 RPM. -- Control:"MACH 3" Motion control software with Work Offsets (up to 253). -- Complete with:Assorted tool holders with ER25 collets, Homing Sensors & Soft Limits and PC for running the machine.

 EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Call

2019 LHI POWER RIPPER  Straight Line Rip
$9,000

LAUDERDALE-HAMILITON POWER RIPPER Straight Line "Rip Saw":Will perform 80% of the jobs done by other Straight-line rips costing up to four times as much.Specifications: -- 10 HP arbor motor - 230V 1-Phase or 220/440V 3-Phase -- 1 HP feed motor and integral feed unit. -- Variable speed drive or 50 to 180 FPM; fixed feed speeds available (150 FPM standard). -- Cogged steel drive wheels, optional non-marking Polyurethane wheels. -- Easy to change 12" dia. blade - just drop the arbor frame, loosen the arbor nut and change blade. -- Fully enclosed blade plus heavy-duty kickback fingers and heavy gauge belt and chain guards. -- Easy-adjust fence with hand crank and positive lock clamps. -- 4' x 5' Table size with right or left hand fence available.Options & Features: -- Can be set up to rip hardwoods or softwoods up to 2.75" thick and 3/4" plywood or particleboard up to 4' x 8' in size. -- Available with Quick-Set Fence and digital readouts for lightning fast size changes.Digital readout, add $2,495

Joe Retzlaff
800-374-5009 ext:348
Call

LHI Lauderdale Hamilton  Straight Line Rip
Call for Price

Lauderdale Hamilton Straight Line Rip Saw With 10HP Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

LHI Lauderdale Hamilton  Straight Line Rip
Call for Price

Lauderdale Hamilton Straight Line Rip Saw with 10HP Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

2014 Ligmatech MDE 110  Clamp Carrier
Call for Price

Workpiece size: 250-2500 mm Long x 280x1000 mm Wide x 280x1320 mm Height Estimated hours: 2,300 This machine has been removed from service and is ready to ship. This system was maintained quarterly by Stiles and is ready to go to work.

Carolina Machinery Sales, Inc
704-288-1904
Call

2019 Quick R-RCGS-2-17  Glue Equipment
$9,850

QUICK 17" wide Top and Bottom Glue Spreader with 0.04" - 1.75" thickness Capacity. -- Features: (2) Smooth EPDM Rubber (70 Durometer) covered 8" glue rollers, (2) 5.8" chrome covered doctor rolls. -- Converts quickly to Top only glue application when needed. -- Comes standard with a fixed 80 FPM feed rate (Optional 40-118 FPM Variable Speed Drive). -- Durable chain drive gives years of trouble-free operation. -- Simple to access hand wheels allow the operator to make quick adjustments when panel thicknesses change. -- Complete with: roll guard hoods and emergency stop wire for Operator Safety. -- All aluminum drip pan catches clean-up water.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Quick F-TTGQA-12  Glue Equipment
$1,350

QUICK F-TTGQA-12 Glue Spreader Table top unit for glue applications on a smaller scale.Equipped with: -- 1/4 HP Motorized 60 RPM steel roller and an approximately (2) quart capacity stainless steel reservoir; both easily removable for clean up. -- Spread roller, rubber grooved - roller dimension 12" X 6"; speed of roller 92 FPM. -- Table top dimension: approximately 2' X 3'. Options: To keep the glue fresh and from cleaning the reservoir daily (1) F-TTGA-COVER-12 Stainless Steel Cover for TTGA, 12" wide, please add ...$175.00.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Quick R-RCGS-1-24-6  Glue Equipment
$11,800

QUICK MODEL R-RCGS-1-24-6 TOP GLUE SPREADER with 6" MAXIMUM OPENING. -- Features: -- Grooved rubber covered glue rollers are acid and heat resistant. -- Easy to clean, 5-7/8" chrome plated doctor roller. -- Comes standard with a fixed 64 FPM feed rate. -- Variable speed drive of 40 to 118 FPM is optional - ADD $900 -- Durable chain drive gives years of trouble-free operation. -- Simple to access handwheels allow the operator to make quick adjustments when panel thicknesses change. -- Complete with: Safety stop bars and roll guard hood, all aluminum drip pan catches clean-up water. -- Specifications: -- 1-Sided Roller Coater (applies glue to top side of board or panel. -- Working thickness: Adjustable from 0 to 152 mm (0 to 6"); adjustable via hand wheel. -- Maximum material width: 630 mm (24"). -- Application rolls quantity: 1. -- Application rolls material: SBR rubber, 60 durometer (Shore A). -- Application rolls diameter: 205 mm (8"). -- Application rolls grooving: (20) Grooves per inch. -- Doctor rolls quantity: 1. -- Doctor rolls material: Chrome-plated steel. -- Doctor rolls diameter: 148 mm (5.8"). -- Doctor rolls grooving: None (smooth rolls). -- Drive motor power: 1.5 kW (2 HP). -- Feed rate: Fixed at 64 FPM (optional: adjustable speed from 40 to 118 FPM; ADD $900.00) -- Includes emergency stop bars at front and back of machine. -- Includes stainless steel waste glue drip pan.

Torry Hiddema
800-374-5009 ext:371
Call

Quick R-RCGS-2-63  Glue Equipment
$10,900

QUICK R-RCGS-2-63 Top and Bottom Glue SpreaderSpecifications: -- 63" Cap., top & bottom spreader for direct application of coatings or adhesive. -- 8-1/4" Dia. grooved applicator rolls and 6.9" doctor rolls. -- 2 HP Fixed speed drive with 64 FPM. -- Upper elevator opening 0" - 1-3/4" with single hand wheel adjustment. -- Complete with: Emergency stop bars, roll guards, metal drip pan.

Torry Hiddema
800-374-5009 ext:371
Call

2017 Quick F-CGAP-12-05-05  Glue Equipment
$6,750

QUICK CGAP-12-05-05 GLUE SPREADER TOP12" Conveyorized Glue Applicator, model "F-CGAP-12-05-05", 12" wide grooved rubber covered roller with stainless steel doctor blade. Large knobs for easy adjustment or removal of doctor blade. Limit switch with wand for automatically stopping the slat blade conveyor when stock reaches the Clamp Carrier. -- Heavy Duty, 3-phase 0.5 HP motor drives the conveyor and glue roll; motor is equipped with an adjustable slip clutch to prevent damage in case of a material jam. -- All components are Heavy Duty for years of trouble free operation. The stainless steel glue pan and doctor blade are easily removed without tools for quick clean-up. - Conveyer system is 12' in overall length, 6' before the glue roller and 6' after.

Torry Hiddema
800-374-5009 ext:371
Call

2019 Quick 06 SECTION HEAVY DUTY-P  Clamp Carrier
$27,580

QUICK 6-Section Pneumatic Clamp Carrier with 20-1/2' width cap. & dual operator's stations, -- (15) Heavy Duty zinc plated clamps per section (90 clamps total), 50" opening on clamps. Jaw sizes of clamps are 3-1/2" high x 4-3/4" wide, with 1° inward draft. -- Equipped with DUAL OPERATOR'S STATIONS including: (2) pneumatic overhead panel flatteners, (2) pneumatic clamp tighteners and with semi-automatic rotation via electric motor drive; with separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In. -- Standard features: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION HEAVY DUTY-H  Clamp Carrier
$44,980

QUICK 20 Section 16.5' Heavy Duty Clamp Carrier -- 20-Section Thick Stock Pneumatic Clamp Carrier; 16-1/2' width cap.; -- (12) clamps, each with 3 1/2" high jaws and 38" clamp opening for a total of (240) clamps. -- All clamps are heavy duty type; zinc plated and with 1° inward draft. --Equipped with: -- Dual operator package with (2) pneumatic overhead panel flatteners, -- (2) pneumatic clamp tighteners. -- Semi-automatic rotation via electric motor drive and separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In. -- Standard features: -- Heavy duty thick stock frame with 3" dia. shafts and 6" I-beam legs; foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with maintenance tools.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick F-CGAP-20-11-17  Clamp Carrier
$8,900

QUICK F-CGAP-20-11-17 20" Wide Conveyorized Glue Applicator -- 20" Conveyorized Glue Applicator, 20" wide grooved rubber glue applicator roll and holddown roller with stainless steel doctor blade and glue reservoir.Features: -- Easy adjustment or removal of doctor blade, 30' overall length. -- 11' Infeed before the glue roller . -- 17' Outfeed conveyor. Equipped with: -- Heavy Duty 0.25 HP motor drive for slat-type conveyor and glue roll, limit switch with wand for automatically stopping the slat bed conveyor when stock reaches the Clamp Carrier, adjustable safety slip clutch. Complete with: -- Foot levelers. -- Heavy Duty crossbars. -- Chain guard, high quality anti-stick Urethane finish. -- Owner & operator's manuals.OPTION:Hold Down roll for face gluing 20" wide: $ 700 additional

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION STANDARD-P  Clamp Carrier
$32,800

QUICK 20-Section Pneumatic Clamp Carrier with 10-1/2' width capacity -- With (8) Standard zinc plated clamps per section (160 clamps total), 50" opening on clamps.Standard Features include: -- Clamps jaws are 2-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment -- Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time!Complete with: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: A 20-Section Clamp typically produces 500 panels per shift.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION  Clamp Carrier
$29,960

QUICK 20 Section Heavy Duty Pneumatic Clamp Carrier: -- Clamp Carrier: (20) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (120 clamps total), 44" opening on clamps (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation: Push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! -- Complete with & Includes: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: 20 Section machine can produce up to (500) panels per shift!

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 14 SECTION HEAVY DUTY-H  Clamp Carrier
Call for Price

14 Section Hydraulic Clamp Carrier with 8-1/2' width capacity. -- This special "thick stock" frame accepts (8) Heavy Duty zinc plated clamps per section. -- Includes 112 clamps with 36" openings and 6" high x 4-3/4" wide jaws with 1° inward draft. -- Integral pneumatic overhead panel flattener. -- Automatic hydraulic clamp tightener with adjustable torque limiter. -- Single button automatic electric motor rotation cycle with indexing. -- The machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- Heavy Duty frame with 3" diameter shafts and 6" I-beam legs. -- Includes: foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating and tool box with spare parts & tools. -- Call your FactoryNew sales specialist for details on all of "QUICK'S" popular clamps ranging from 30" to 52" openings. Many other base frames are available in hydraulic and pneumatic operation.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION HEAVY DUTY-AH  Clamp Carrier
Call for Price

Quick Hydraulic Clamp Carrier with 20-sections and 12-1/2' width capacity. -- This special "thick stock" frame accepts (12) Heavy Duty zinc plated clamps per section. -- Includes 240 clamps with 36" openings and 6" high x 4-3/4" wide jaws with 1° inward draft. -- Integral hydraulic overhead panel flattener. -- Automatic hydraulic clamp tightener with adjustable torque limiter. -- Single button automatic electric motor rotation cycle with indexing. -- The machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- Heavy Duty frame with 3" diameter shafts and 6" I-beam legs. -- Includes foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating and tool box with spare parts & tools. -- Contact your FactoryNew representative for various style clamps and to add other features. Many other base frames are available in hydraulic and pneumatic operation.

Louis Sicotte
800-374-5009 ext:329
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved