Woodworking Equipment For Sale

This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw

1996 Weinig Hydro-Mat 23 (6) head moulder w/ control station and hydraulic power unit, S/N 023-2386, (8) 9.5”, (6) 6 3/4”, and (19) 2.5” heads, all but (4) with knives (most 6 knives per head), includes head and knives currently installed on moulder w/ outfeed 18” C14.5 belt conveyor and drive w/ toolbox w/ misc. knives, templates for knife & other misc. W/ Weinig (9) strand infeed table S/N 314-LCF/16 w/ hydraulic power unit w/ blow, $20,000 without tooling (ref # 162) Call Amy for more information (928) 723-9449

1978 Weinig 7 Head Moulder S/N 2816/2248

Weinig R950 Profile Grinder

Weinig Powermat 400 Moulder HSK heads Radial and axial head controls Still under power and available for inspection.

2023 Weinig Powermat 7000 Bought new $120k 460V

Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l

Weinig U22N Moulder 7 head Mid 80s Freshe rebuild

Weinig Rondamat 934 Grinder

2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.

Wemhoner Variopress

WEMHONER Hot Oil Feed Thru Press - 7’ x 12’ Platen, 7.5’ x 13’ motorized feed belt - 340 Ton pressure, 8 cylinders, 6” opening - 12’ gravity outfeed conveyor - Includes natural gas boiler for hot oil. - Machine is no longer in service and disassembled. Call 800-459-2148 for more info.

Wemhoner Variopress Basic 1000 Plus Model KT-MB-28/MB/15-240 Single Daylight Upstroke Hydraulic Press Max. Opening 2,540mm X 1250mm ( 100” X 49” ) 2 Trays Pin System 3D Application Foil Types PVC, PET, PP,ABS, Veneer And HPL Total Press Capacity 240 Tons Top/Bottom Heated Platens Working Height Approx. 900 mm (35.4”) Daylight Opening 150mm (5.9”) Upper Platen Heated by Thermal Oil Circulation 6 Cyclinder 125mm ( 4.9”) Diameter Total Press Pressure 2,400 KN Two Tray System with Pin System Tables arranged in over-under Configuration with Scissor Lift entering and exiting press on the same End Vacuum Pump and Vacuum Tank Foil Roll Storage Carousel ( Paternoster) for Vinyl Rolls Programmable Logic Controller PLC Model Siemens Simatic S7 Setting Parameters and operation of Pin System Year 2005 AS NEW CONDITION 460 volt 3 phase

West Salem model 2420GR1-H wood grinder/hog

WESTERN PNEUMATICS FJE 430R Medium Production Finger Jointer SystemRight and left Shaper Section with Automatic crossover model FJE 430 RCSpecifications: -- Material Thickness Capacity: 5/8"; – 2"; -- Material Width Capacity: 1-5/16"; to 8"; -- Material Length: 4"; – 28"; -- Feed Capacity 30 - 60 Lugs Per Minute -- Lugs are Space on 12"; Centers -- Feed Motor: 10 HP -- Variable Speed Feed from 30 - 60 FPM -- Scoring Saw Motors: 3 HP -- Trim Saw Motors: 5 HP -- Cutterhead Motors: 15 HP -- Manual Transfer Corner -- APQUIP Glue Applicator -- Assembly Press w/ 16’ Max. Cut-off Capacity, Model AMS 248 LB -- Assembly Section Feed Variable Up to 150 FPM -- Self-Contained Hydraulic Unit -- 7.5 HP Cut-off Saw -- Board Press, Model BPS 216 RC -- Standalone Control Cabinet -- Touchscreen PLC Control

Whirlwind Undercut Saw with Tiger Stop Fence

Model: 1000L From left to right feed Blade Capacity: 14 Cutting Capacity: 2-3/16 x 8-1/4 OAD: 25"L x 25"W x 45"H Also Included Tiger stop

WHIRLWIND - 855, Dual Table Oscillating Edge SanderDouble-sided with 8" x 56" platens size.Specifications: -- 7.5 HP - 1,725 RPM TEFC Motor, abrasive belt size of 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table, tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection, dust hood on drive end, and all standard equipment.

Williams 125 CJS1 Hammermill