Woodworking Equipment For Sale

NORTHTECH NT-610HC Double Surfacer:Specifications:: -- 24" x 8" Cap., min. Material length: 12". Table size is 111" x 24". -- 40 HP top and 30 HP bottom belt-driven motors -- Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 20 - 110 FPM powered by a 3 HP feed motor -- Feed works driven via gearbox and heavy-duty Cardan Shaft Drive -- 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are spiral insert knife heads with 30 x 12 x 2.5 mm insert-type knives.Features: -- Rugged cast iron and plate steel fabrication; -- Infeed conveyor/carpet (spiked) allows precision jointing accuracy, especially on warped or twisted lumber. -- Computerized top cutterhead positioner is accurate to +/-0.001"; -- Chromed beds; Guards and skirts for operator safety. -- Machine dimensions: L2830 x W185 x H1700 mm, Weight: 10,500 Lbs -- Dust Collection: 3600 CFM

NORTHTECH NT 1000-50HCVS Single-Sided 40" PlanerSpecifications: -- 40" Planer, 40 HP main motor, Helical Head, Adjustable bed rollers 15 mm x 15 mm x 2.5 mm Carbide Insert cutters. -- The spiral cutterhead provides a high chip removal rate, superior surface finish and low noise. -- Powerful 40 HP cutterhead motor makes this planer ideal for heavy-duty planing and meets high production requirements. -- Variable feed speed is mechanical variable from 0 - 90 FPM. -- Power elevation of the feed bed with "727 M Digital Table Adjustment" for fast accurate, and convenient thickness setting. -- Extra heavy rib reinforced cast iron table, surface precision ground. Equipped with: -- (4) Powered steel bed rollers. -- (4) Upper rollers. -- (2) Powered corrugated infeed rollers. -- (2) Powered urethane outfeed rollers. -- Upper and lower limit switches for opening control. -- (4) Dual 50 mm jack screws for raise/lower bed movement; 12" max opening. -- 2 HP Elevation motor with manual adjust. -- Rear E-Stop for added safety. -- Dual 6" dust ports requiring 1,000 CFM @ points of extraction.

2007 Northtech NT-CS14R-53 3 phase 460 volts 5 horsepower SN 07113 Operates good

Northtech MRS-14-DXL 460v Manufacturer notes: This is a very popular machine and cost effective. New open ended design allows for you to cut wide material up to 27-1/8? wide. Plus spare arbors, lasers, and the optional quick locking, easy to adjust infeed will not break the bank. The Northtech heavy-duty 50 HP multi-rip (“gang-rip”) saw with 15? maximum blade diameter quickly and accurately cuts material up to 4-15/16? thick and 27-1/8” wide. Cutting both sides of your blanks at once provides incredible parallelism, reducing required moulder allowance, and increasing your yield. Laser guides (one included) and an optional 103” fence make proper alignment of even the longest material simple and precise. Variable feed speeds of 25 – 120 FPM and powered height adjustment further improve operator efficiency.

Northtech MRS-12N Gang Rip 50 HP Motor

Manufacturer’s Specification - 15HP Motor + 1HP feed motor (with Wye Delta soft start) - Mechanical variable speed (45' – 100' FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”. - Bottom & top kickback fingers - Rack and pinion fence for precise and quick positioning. - Digital electronic oiler provides maximum chain and race life. - 15-1/2? distance from column to blade. - 8' glue line tolerance.

NORTHWOOD - NW 3-Axis TA48MT Iron Horse: CNC Machining Center with Roller Hold-down -- SpecificationsAXES TRAVELX Axis: Front-to-back Worktable; 152";.Y Axis: Left-to-right; 105";.Z Axis: Up & down; 14";.AXES TRAVERSE/FEED RATESX-Axis rapid traverse rate: 3,150 IPM (80 MPM).Y-Axis rapid traverse rate: 3,150 IPM (80 MPM).Z-Axis rapid traverse rate: 500 IPM (12 MPM).X-Axis max. machining feed rate: 3,150 IPM (80 MPM)Y-Axis max. machining feed rate: 3,150 IPM (80 MPM).Z-Axis max. machining feed rate: 500 IPM (12 MPM).MACHINE TOLERANCESUnidirectional linear axis positioning accuracy: +/-0.0008";.Unidirectional linear axis positioning repeatability: +/-0.0003";.All tolerances are based on inspection at an ambient temperature of: 68º.Z-AXIS RAM COUNTERBALANCEForce neutral pneumatic counterbalance system with: High volume quick response valves.Vertical Z-axis: Uses a compression nut for max. accuracy and speeds up to 500 IPM.HEAD CONFIGURATION(1) 24 HP, 4-Pole, liquid cooled “cartridge"; spindle “929"; with: HSK F63 Chuck; programmable RPM up to 24,000; synthetic grease lubricated “Quad"; ceramic bearings; safety device for automatic fault detection; max. tool shank diameter: 1";. (1) HSK F63 “12-Station"; Automatic Tool Changer (ATC) Carousel; (2) programmable, lockable Air Blast Nozzles at the spindle; nozzles are programmable via: M code. (1) Dust collection shut/off programmable via: M-code; tool touch-off probe.DRILLING UNIT(1) 5-Line drill unit; each independently programmable; standard 32 mm center spacing.SPOIL BOARD MILLING SOFTWAREAllows input of all parameters necessary for surfacing the spoil board.ROLLER HOLDDOWN(2) “Quad"; Roller Holddown Systems consisting of (4) steel rollers covered with: Engineered poly coating per worktable.Rollers are: Independently programmable via CNC controller to control up & down location. ALUMINUM MATRIX WORKTABLE(1) 49"; x 97"; Cast aluminum high-flow vacuum worktables.3"; Vacuum hoses provide: Vacuum to the worktable.(1) Aluminum matrix vacuum plenums.PART LOCATION STOPS(1) 1-1/4"; Dia. steel part Location Stop is provided; automatic extension & retraction of stop is pneumatically controlled via: M Codes or pushbutton at CNC console. (1) Magnetic sensor switch for part location stop position verification; flush mounted to the edge of the worktable.POP-UP ROLLER BALLS INTEGRATED INTO THE MACHINE WORKTABLE(1) Matrix vacuum plenum equipped with: Pneumatic “pop-up"; roller balls that are integrated into the worktable.Pop-up roller balls assist the Operator in loading & unloading transfer sheets. MATERIAL HANDLING ROLLER TABLES(1) Vacuum sweep dust collection shutoff is controlled via an optic sensor with floating height to move relative to the spoil board thickness automatically.(2) 10"; Blast gates: (1) For the spindle & (1) for the table sweep. Independent safety cables around each material handling table, and the machine “Table will have quick disconnect plugs";

NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machineSpecifications: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard -- Foot swtich

Oakley Edge Sander

OGAM PO/M Straight Line Rip Saw;Specifications: -- 20 HP Main motor. -- 24"; throat capacity. -- Max. cutting height: with 12" blade 3", with 16" blade 4". -- Min. diameter of circular saw blades: 8". -- Max. dia. of circular saw blades: 16". -- Min. length of working pieces: 10". -- Variable feed speed from 50 -154 Ft./minute. -- Feeding belt width: 11". -- Spindle Speed: 4,500 RPM. -- 36"; x 60"; table.Equipped with & Features: -- Fence and rail system with one stop. -- Infeed table row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Top row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Split hold down steel smooth roller around blade. -- Split hold down steel smooth roller around blade. -- Steel smooth top hold down roller. -- Chain is in excellent condition!

Ogden SL3660 RFS

Ogden PUR Laminating Line - Hopper Feeder - Glue Applicator - Drum Melter - Substrate Transfer - Roll Press - CRP14 - Manual Cut Off Saw

OGDEN PUR LAMINATING LINE for Engineered FlooringSystem consists of:POS 1. PLYWOOD HOPPER FEEDER Plywood boards (two-track or single-track) are loaded vertically into the hopper and push-fed from the hopper into the Roll Coater where the rolls from the Coater take over feeding the plywood. The plywood hopper feeder is centered to the press; adjustments of the fence are via hand crank where both sides of the fence move simultaneously. The hand crank has a digital indicator to assist the operator in the width setup. Specifications:Length 4 ft to 8 ftWidth with single track 6" to 12"; tolerance of +/- 1/64";Width with double track 3" to 7" tolerance of +/- 1/64";Hopper capacity height 16";Pass line-height 37"; POS 2. DRUM MELTER Drum melter melts the glue which is contained in a 55-gallon drum, it pumps the glue out through heated hoses and delivers the glue to the roll coater. The roll coater sends the drum melter signals when to pump glue and when to run the pump off, a signal is sent according to glue level height. POS 3. TOP HEAD PUR ROLL-COATER Roll coater to apply hot melt PUR glue to the top of the Substrate. Roll coater will be equipped with wheel casters in order to move the unit out of the line for cleaning. Touch Screen Control panel for the coater is mounted on the left-hand side when facing the in-feed of the unit. Adjustment of doctor roller will be with hand wheel (not powered) and mechanical digital display in increments of 0.001" in relationship to application roller. Adjustment of the coating roller will be powered and will include a hand wheel with a mechanical digital display in increments of 0.001" Roll coater is equipped with a fume extraction hood which is located above the roll coater. Feed speed 20 - 250 FPMMin coater length 21"Maximum thickness 4"Minimum thickness 3/8"Effective coating width 14"Doctor roller ground chromeCoating roller silicone, 60 durometerVoltage 480 VPass line height 37"; POS 4. PLYWOOD TRANSFER CONVEYOR Conveyor length 20’Veneer lengths 2’ to 12’ ’Width with single track 7" to 12"; tolerance of +/- 1/64";Width with double track 3" to 7" tolerance of +/- 1/64";Pass line-height 37";Feed speed range from 20 to 250 FPMPop up gate will be installed to st

OLIVER 4045 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.Specifications: -- 12" Blade capacity and 0° - 45° tilting arbor with digital read-out. -- 7.5 HP Motor at 3,450 RPM. -- Complete with: 52" rip fence capacity that will handle most of your work. -- 48" x 52" Cast iron table. -- Blade guard, miter gauge, push-button controls. -- Parts list & operation manual.

OLIVER 4016 10" Table Saw, 5 HP, 3-Ph w/36" Rail Specifications: -- 5 HP motor; poly V-belt drive system with belts that run smoother and with less vibration, giving you the highest quality cut available. -- Top it all off with with OLIVER'S Optimus square tube fence and a digital blade angle readout system and you've got a saw that tears it up with accuracy and in style! -- Model 4016.004 5 HP, 220V. 3-Phase.

OLIVER 4045 1-Phase 12" PROFESSIONAL TABLE SAW, with 36" FenceHeavy-duty cast iron table precision ground for accuracy; rugged machine frame construction provides maximum stability and reduced vibration.Specifications: -- 12" Blade capacity and 0° - 45° tilting arbor with digital read-out. -- 5 HP Motor at 3,450 RPM. -- Complete with: 52" rip fence capacity that will handle most of your work. -- 48" x 52" Cast iron table. -- Blade guard, miter gauge, push-button controls. -- Parts list & operation manual.

Oliver 36" Band Resaw

OLIVER 17"; SWING FLOOR DRILL PRESS17" Floor model Drill Press with a durable cast iron head, table and base.Equipped with: -- 3/4 HP motor, 240 to 3,400 RPM motor drives (16) different speeds making it suitable for heavy industrial use. -- The spindle is equipped with a heavy duty 5/8" capacity drill chuck on a MT-2 Morse taper. -- Spindle travel 3-1/8" -- Large 12" x 12" table with clamping slots. -- Rack and pinion system makes it easy to adjust the table up and down.

OLIVER - 92-D: MortiserSpecifications -- Bit/chisel capacity: 1/4 - 3/4"; stroke from: 2-1/2 - 4"; shank size: Up to 3/4".Equipped with & Features -- 5 HP - 3,450 RPM Motor; power feed provides: 16 - 40 Strokes/Min. -- Push-button controls for: Operation of the (2) motors. -- Universal compound table. -- 6" Wide x 36" long; moves horizontally by rack & pinion; table can be tilted or clamped up to a 45° angle, either right or left for angle mortises.

OLIVER 4705 SHAPER 5 HP, 1-PH or 7.5 HP, 3-PHSpecifications and Features: -- Massive cast iron precision-ground table provides a solid work surface. -- Cast-iron base provides a steady platform. -- 3/4"; and 1-1/4"; interchangeable spindles are included for added versatility. -- Three spindle speeds allow more choices to produce a better finish. -- Reversing the spindle gives more options for each setup. -- Innovative dovetail design accurately raises and lowers the spindle. -- Fence is independent and features micro adjustments for quick set-up. -- Top-mounted control panel includes a digital readout for spindle height. -- Large hand wheel for quick spindle height adjustment. -- Magnetic controls, with an emergency off switch for safer operation. -- Includes miter gauge. -- Spindle Speeds: 5,000, 7,000, and 10,000 RPM. -- Maximum Tool Diameter: 7"; Below Table, 8"; Above Table. -- Spindle Diameter: 1-1/4"; and 3/4"; Interchangeable. -- Vertical Spindle Travel: 4". -- Table Height: 36-1/2". T-Slot: 3/4" x 3/8". -- Dust Port Diameter: 4". -- 800 CFM min. Spindle Options: -- 1/2" Spindle for Models 4705 & 10047 Shaper $89.99 -- 3/4" Spindle for Models 4705 & 10047 Shaper $89.99 -- 1" Spindle for Model 4705 Shaper $99.99 -- 1/4" Collet for Models 4705 & 10047 Shaper $69.99 -- 1/2" Collet for Models 4705 & 10047 Shaper $59.99 -- 1-1/4" Spindle for Model 4705 Shaper $99.99 Optional collet for router bits available for special order, Model 4705 prices may vary.