Woodworking Equipment For Sale

KUFO SK-12RS Straight Line Rip Saw w/Return Conveyor;Entry level Straight-Line Rip Saw with a guaranteed 6' glue line. -- Powered by a 15 HP direct drive motor. -- 12" Dia. Blade capacity for up to 3-1/4" max. cutting height, 4,200 RPM blade speed. -- Equipped with (6) holddowns and a Wye-Delta soft start for lower amp requirements during start-up. -- 1 HP Feed motor, 36 - 145 FPM feed speed, 6" chain width and automatic chain lubrication. -- Treated chain links, pins and raceways withstand heavy use because of an automatic oiler. -- Large 15-3/4" rip capacity. -- Overarm control box mounted on the in-feed side. -- Total space requirements are about the same as a standard size tablesaw. -- Complete with side mounted return conveyor.

Kuka KR60-3 Robot System KR C4 Control System Kuka Programming Smart Pad Robot Enclosure (3) Heavy duty conveyor racks

KUNDIG - 2-43, ..2-Head Wide Belt Sander43" Width cap. Drum, Combination Head.Head Configuration: 1st Head: Spiral rubber covered contact roll, 6-1/4" dia. (80-Shore),2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll (50-Shore) and 3-1/8" wide "air inflatable/cushioned" finishing platen, Specifications: -- Abrasive belt size of 43" x 75" with air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 1 HP Variable feed drive, 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features: -- LED Readout of thickness, part "over thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button, motor load meters, and magnetic controls. -- CONSTANT PASS LINENote from the seller : Low hours. Completely professionally cleaned upon taking out of service. Runs great. Condition ExCELLENT.

KUNDIG DUPLEX 53-RC-E Wide Belt Sander (2) Heads; 52" Width cap. Drum, Combination Head.Head Configuration1st Head: 7-1/4" Dia. rubber covered contact roll, 25 HP motor.2nd Head: Combination head with rubber covered contact roll and segmented finishing platen, infeed sensors sense the panel and electronically control the platen height with timers, variable edge control can also be set, 20 HP motor.Specifications: Abrasive belt size 54" x 75" with air tensioning and electronic abrasive belt tracking, both heads with abrasive grit thickness adjustment, 2 HP Variable feed drive. -- Conveyor belt speeds 9 - 45 FPM, controlled by electronic inverter & adjustable on the control panel; infeed & outfeed rubber covered holddown rollers.Equipped with & Features: -- Workpiece thickness cap. 1/8" - 6-1/4", motorized thickness adjustment with LED readout. -- A joystick controls the conveyor opening and start/stop of the feed, automatic "over-thickness" protection and automatic conveyor belt tracking. -- Constant passline of conveyor height at 35". -- Air blow off of second head abrasive belt. -- Emergency stop button, motor load meters, magnetic controls.NOTE from the seller: There is a small leak in the air bladder . The sander has 6,541 working hours

KUNDIG - 2-43 ..2-Head Wide Belt Sander43" Width cap. Drum, Combination Head.Head Configuration: 1st Head: Spiral rubber covered contact roll, 6-1/4" dia. (80-Shore), 25 HP motor.2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll (50-Shore) and 3-1/8" wide "air inflatable/cushioned" finishing platen, 20 HP motor.Specifications: -- Abrasive belt size of 43" x 75" with air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 1 HP Variable feed drive, 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features: -- LED Readout of thickness, part "over thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button, motor load meters, and magnetic controls.

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LACEY-HARMER LD-2002 Diode LaserEconomical self-contained Visable Diode Laser, optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° to +40° C operating temperature, 90 V for 250 nano-sec surge protection. Beam angle 5 to 90 degrees, 5mW to 35mW output, 636 nm wave length for lines up to 20' projection. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed. -- Optional items consist of: Crossbar style mounting bracket, please add...$ 90; axis slide brackets for easy positioning, add...$ 125 or alteratively a simple universal stationary mounting bracket, please add...$ 30.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

LAGUNA PRO 37 WIDE BELT SANDER1-Head, 36" width cap. - Combination sanding head with 4" dia. rubberized contact roll & 3" wide "dual action" polishing platen.Equipped with: -- Abrasive belt size 37" x 75" -- Pneumatic abrasive belt tensioning. -- Electronic abrasive belt tracking. -- 20 HP main drive motor. -- 1HP Variable feed speed motor for 12 - 60 FPM. -- 1/4 HP Conveyor bed elevation motor, with digital programmable thickness set up and AUTO-SIZE thickness system as well. -- Infeed & outfeed rubber covered holddown rolls. -- 0" - 5-1/2" thickness capacity.Complete with: -- Air-operated disc brakes on sanding head, emergency stop button

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

LAGUNA SMARTSHOP LD 4 "Lock Dowel" Boring-Mortising & InsertingThe SmartShop LD4 machine. This budget-friendly machine was designed specifically for the rapid prototyping of cabinetry. It’s a CNC router that drills and inserts fasteners for drawers, closets, desks, cabinets, and so much more. It can even handle processing real hardwood.Even though it looks very intimidating, the LD4 is actually quite easy to learn on. It is constructed out on one welded piece of tubular steel, and it weighs about 6,000 pounds.It has a built-in dust collector, dual precision spindles that produce 2 horsepower, eight pneumatic/adjustable clamps, and dual vibratory hoppers and inserters.This machine is also compatible with the Windows operating system, which allows you to create any kind of design you want.Specifications: -- Maximum material lenght 95" -- (3) Axis positionning -- Requyired no glue or case clamp for assembly -- (2) Spindle for drilling or routoing for 5 and 8 mm diameter -- Up to (4) working zone -- (2) Vibrating hopper feed system for type C and H "Lock Dowel" clips -- (8) Pneumatic hold down -- Laser reading of panel lenght and thickness -- Bar code reader

LAGUNA SMART SHOP II, 510 CNC Router with Tool Changer: Specifications: -- 60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table including manual controls. -- 60" x 120" x 9.5" Z-axis travel, 12" clearance under the gantry; speeds of 900 IPM rapid travel with 600 IPM max. cutting speed. -- Equipped with: -- 11 HP HSD (Italian) Electro Spindle ISO-30 (ATC), 6,000 - 24,000 RPM range, Ceramic spindle bearings supported by Automatic Tool Changer with 8-tool position tool rack. -- Includes: Vacuum pump, dust collector, assorted ISO-30 tool holders, collets, and precision collet nuts. -- All Axed ride on 25 mm Heavy Duty HiWin HG Series linear bearings and rails on all axes rack; Helical rack & pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. -- Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). -- Controller & Software: -- The B & R Automation (Austria) System matched controller and drive components for easy diagnosis and exceptional reliability. -- Features: Networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs Industry Standard G-Code that can be created from any CAM software package; program transfer to the controller can be accomplished with USB or via Ethernet transfer. -- Complete with: -- Expandable control system for custom applications, spindle speed control through programming, manual overrides of spindle speed & feed speeds during run, centralized lubrication system for all axes. -- Machine supplied with: -- (2) 10 HP Vacuum blowers with Vacuum monitoring gauge, assorted tool holders, and manuals.

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

LANGE MASCHINEN BAU B85K Edgebanding MachineSpecifications: -- Workpiece thickness: 8 – 50 mmWorkpiece width min.: approx. 75 mmWorkpiece length min.: approx. 120 mmEdging thickness: 0,4 – 3,0 mmMax edge thickness = Workpiece thickness + 4mm (2+2)One sided automatic edge banding machine with direct glue application to straight workpieces, high frequency cut off station, high frequency top and bottom milling unit, chain feed, double roller top pressure and work piece support. For ABS,PVC, melamine and strong wood veneer roll materials as well as fixed lengths.

LANGZAUNER G-5920 Cross-Cut Guillotine. Specifications: -- 35.5" Blade hydraulic pressure bar and knife; -- 5 Gal tank, pump is driven by 1.5 HP motor.Complete with: -- 2-Hand operation or foot pedal, Emergency-Stop, (3) photocells for safety, -- All safety guards per international standards.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

Single head; 1.5 HP TEFC direct drive motor, spindle tilts 60° forward & 40° backward, inverter controlled variable speed from 400 - 1,800 RPM, RPM display; 4" vertical & horizontal spindle adjustment. -- Features: 36" x 33" Solid wood table top, 36" table height; 1" dia. x 4" long spindle accepts standard sanding discs but are designed for LARRICK profile discs made to customer specifications. -- Complete with: Enclosed fabricated steel base, dust hood w/piano hinge for easy ascess to sanding disc, stationary fence, large hand wheels for easy spindle adjustment.

The Model 390 Automatic Shaper is a New concept in shapers. -- This "New Shaper" is conveyor fed, making it ideal for shaping small parts which could not be fed with a conventional Power Feeder. -- The 7.5 HP inverter controlled variable speed shaper can shape pre-arched panels automatically. Using a Template, it can also hog out arched panels. -- Horizontal and Vertical shaper adjustments with digital position indicators and the 5-position fence make profile changeovers extremely quick and simple. -- Standard stack tooling spindle -- Optional upgrade to 460 V, additional $ 250.