Woodworking Equipment For Sale

KUNDIG - 2-43: 2-Head Wide Belt Sander43" Width cap.; Drum; Combination Head.Head Configuration1st Head. Spiral rubber-covered contact roll; 6-1/4" dia. (80-Shore); 25 HP motor.2nd Head. Combination head with: 6-1/4" Dia. rubber-covered contact roll (50-Shore); 3-1/8" wide "air inflatable/cushioned" finishing platen; 20 HP motor.Specifications -- Abrasive belt size 43" x 75" with: Air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 1 HP Variable feed drive; 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber-covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features -- LED Readout of thickness; part "over thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button; motor load meters; magnetic controls.

KUNDIG - 2-43: 2-Head Wide Belt Sander43" Width cap. Drum, Combination Head.Head Configuration 1st Head. Spiral rubber covered contact roll, 6-1/4" dia. (80-Shore),2nd Head. Combination head: 6-1/4" Dia. rubber-covered contact roll (50-Shore; 3-1/8" wide "air inflatable/cushioned" finishing platen. Specifications -- Abrasive belt size: 43" x 75"; with air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed: 1 HP Variable feed drive; 9 - 45 FPM feed speed with an inverter. -- Infeed & outfeed rubber-covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening.Equipped with & Features -- LED Readout: Thickness;, part "over-thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button; motor load meters; magnetic controls. -- CONSTANT PASS LINENOTE from Seller: Low hours! Completely & professionally cleaned upon taking out of service. Runs great. Condition: EXCELLENT!

KUNDIG OPTIQ 2-43 DUAL HEAD WIDE BELT SANDER2-Head, 43" width cap. - 1st Head: steel contact roll, 6-1/4" Dia., 25 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide finishing platen, 15 HP motor. -- Abrasive belt size 43" x 75", with air tensioning & electronic abrasive belt tracking, conveyor belt feed with 1 HP variable feed drive, 9 - 45 FPM feed speed with inverter, infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening, LED readout of thickness, part "over-thickness" protection, automatic conveyor belt tracking. -- Features: Emergency stop button, motor load meters, magnetic controls.

LA NUOVA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Lot of tooling. Table for flat/horizontal copying.Note: Machine completely gone over and all heads rebuilt in 2011 and used sparingly since.Actual model is 201-16.

LA SCOLPITRICE 201-16 Multi-Spindle Carving Machine.(16) Cutter Stations, 55" max. workpiece length,Specifications: -- (16) Dual carving spindle heads, 8" between spindles, 20" max. working diameter. -- Each head has a roughing & finishing spindle, all heads swivel 360° with pneumatic locking. -- Upper carriage controlled by (2) High Frequency changers allowing (2) motor speeds of 12,000 & 18,000 RPM. -- Pneumatic chucking of material, stock turns 360°. Copy stylus of hardened and ground steel, adjustable for depth on either side. -- Traverse feed of carving heads was patented and requires no maintenance. -- Includes: Table for Flat Work (2,000 mm); Rotary Device (1400mm); Automatic Chucking;Pneumatic; Clamping of Motor Carrier Shaft; (6) Sets of carving Bits with stylusActual model is 201-16.

LACEY-HARMER E-LINE Self-contained Visible Diode Laser End ShooterEconomical self-contained Visible Diode Laser; optics housed in a sealed cell to provide added protection against contaminants and moisture; nickel plated housing. -- Specifications: 100 Millampere operating current, -20° - +40° C operating temperature, 90 V for 250 nano-Sec mechanical stock. Beam angle with 5 mW - 15 mW output, 636 nm wave length. -- Options: 36" Long Diode Array Stand adjustable up to 90° from mounting surface, lines move easily and parallel to each other, micro-adjustment to make lines parallel, no tools needed -- Projects a line from approx. 12' to 15' depending on area lighting -- Consisting of two parts; (1) crossbar style mounting bracket, please add...$ 143; (2) axis slide brackets for easy positioning, add...$ 125 each or alteratively a simple universal stationary mounting bracket add...$ 30.

Hot Air Edgebander for Preglued banding 0.4 - 1.5 mm thickness Automatic cutoff for up to 1/32" Coil feed with manual feed for strips Panel thickness 10-50mm Front and rear end trim Top/bottom trim

Laguna Bandt 4 Edgebander Machine is 6 months old Extremely low hours - Buyer upgraded to a larger machine!

Equipment located in O’Fallon, MO. 2021 Laguna Bandit 3/2 Edgebander, 220V, 1 Phase, 60Hz, 40 Amps w/ Additional Related Accessories, Model: MEB3/2-0135; S/N: 21060029EB3N1 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6073355-02 All offers including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is an eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6073355-02 Contact Info: RTR Services Inc. 1-800-238-3294

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

LAGUNA BM23E-2 ... Double Row Line Borer(2) 23-Spindle heads on 32 mm centers, (2) 3 HP motors, drills vertically from bottom.Specifications: -- Distance between first and last spindle 851 mm (33.50"). -- Spacing between zero and max. on the first head 0 - 4". Min. distance between two heads 7.25". Max. boring line spacing to the second head 24". -- 2,800 RPM spindle speed; collets accept 10 mm shank bits. -- Heavy overhead material holddown system with (4) pneumatic material clamps. -- (2) independent air throttles to control the drill-heads upstroke speed.Complete with: -- "Set screw" drill adapters, "quick set" system for depth of drilling. -- Extension fence with (3) flip-stops and foot pedal control.

Laguna - Pinnacle: Hydraulic Copy Lathe -- 52" Between centers with: 16" Max. copy dia. (13" copy dia. with hydraulic tracer). This machine has: Removable 24" gap section on the bed allowing: Max. 48" dia. for bowls/tables, etc. -- Includes: Standard Head Stock thread: 45 x 4.5 mm (adapters avail.); Morse Taper #3 on: Head & tail stock; electronic variable speed control; reverse, In-head indexing face plate (i.e., for fluting). -- Features. Added 24" extension (ordered from LAGUNA; allows turning long columns or architectural turnings). -- Optional items included on this machine: Copy device; Spiral device, manual tracer; hydraulic Copy Tracer; Power Feeder; square stock steady rest.

Equipment located in O’Fallon, MO. 2021 Laguna P12|8 Industrial Panel Saw, 5.75 HP, 1-Phase, 220V, 60Hz, Model: MPSP12-8-0135, S/N: 210658898D5P2M All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6073355-04 All offers including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is an eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6073355-04 Contact Info: RTR Services Inc. 1-800-238-3294

Laguna Swift CNC Router 5x10 Table Dual vacuum pumps 6-Vacuum zones 3 HP Spindle: 18,000 RPM

LAGUNA SMART SHOP MT Elite 5' X 10' CNC Router w/ ATC:60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with manual controls. -- Specifications: Machine travel 61" x 121" x 12" axis clearance under the gantry, Speeds of 2,000 IPM rapid travel with 1,800 IPM max. cutting speed. -- Equipped with:(1) 12 HP HSD Electrospindle, 6,000 - 24,000 RPM Range, Ceramic Spindle Bearings.(1) 8-Position Automatic Tool Changer Rack.Includes assorted tool holders, collets, collet nuts & tools. -- All axesRide on 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis.Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). -- Control:FANUC Industrial Control, a state-of-the-art control system designed for precision machining applications. With its advanced features and intuitive interface, the control provides unmatched accuracy, speed, and flexibility for a wide range of machining operations.Runs industry standard G-Code that can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transfer. -- Complete with:Expandable control system for custom applications, Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run.Tool Touch-Off Probe, Centralized lubrication system for all axes. (2) Vacuum Pump blowers with Vacuum monitoring gauge, assorted tool holders.

LAGUNA SMART SHOP 2 PRO CNC Router, 5' X 10' with ATC & 82 Hours Only! (Purchased & Delivered in March 2024):60" x 120" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slot table including manual controls. -- Specifications: Machine travel 61" x 121" x 9.5" axis travel with 12" clearance under the gantry, Speeds of 900 IPM rapid travel with 600 IPM max. cutting speed. -- Equipped with:(1) 9.6 kW (12.87 HP) Electrospindle ISO-30 (ATC), 5,000 - 24,000 RPM Range, Ceramic Spindle Bearings supported by Automatic Tool Changer with (8) tool position tool rack; Includes assorted ISO-30 tool holders, collets, and precision collet nuts. -- All axesRide on 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). -- Control:SYNTEC TECHNOLOGY controller and drive components for easy diagnosis and exceptional reliability. Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry standard G-CodeThat can be created from any CAM software package. Program transfer to the controller can be accomplished with USB, or via Ethernet transfer. -- Complete with:Expandable control system for custom applications, Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. -- Centralized lubrication system for all axis. -- (2) 7.5 kW (10.06 HP) Vacuum Pump blowers with Vacuum monitoring gauge, assorted tool holders. -- LAGUNA "CFLUX:3" 3 HP Cyclone Dust Collector.

LAGUNA - SMART SHOP II 510 - 5' x10' CNC Router with ATC: -- Specifications60" x 120" Moving gantry; fixed table design in a front-to-back configuration with: 6-Zone vacuum table including manual controls. -- 12" Z-Axis Stroke; 9-1/2" Z-axis clearance under the gantry; speeds: 900 IPM rapid travel with 600 IPM max. cutting speed. -- Equipped with:(1) 12 HP HSD Electrospindle ISO-30 (ATC); 6,000 - 24,000 RPM range; ceramic spindle bearings supported by: Automatic Tool Changer with 8-tool position tool rack. -- All axes ride on 25 mm Heavy-Duty HiWin HG Series; linear bearings & rails on all axes' rack; Helical rack & pinion drives on: "X" & "Y" axis; precision ground ball screw drive: On "Z" axis. -- Gantry: Driven on each end; (2) "helical" rack & pinion drives on "Y" axis. -- Controller & Software"SYNTEC" Control System matched controller & drive components for easy diagnosis and exceptional reliability. -- Runs Industry Standard G-Code: Can be created from any CAM software package; program transfer to the controller can be accomplished with USB or via Ethernet transfer. -- Expandable control system for: Custom applications; spindle speed control through programming; manual overrides of spindle speed, feed speeds during run; centralized lubrication system for all axes. -- Complete with: --(1) 2022 10 HP BECKER Vacuum Pump. -- Options Include:(1) Laguna Tflux-10 3-Phase, 10 HP, Cyclone Industrial Dust Collector, as pictured. -- Box of misc. items as pictured.

Equipment located in O’Fallon, MO. 2021 Laguna Smartshop 2 SUV-510 CNC Router, 5x10 Cutting Area, Syntec Computer, Laguna Tflux-10 3-Phase, 10 HP, Cyclone Industrial Dust Collector, 2022 Becker 10 HP Rotary Vacuum Pump 3-Phase, 220 V 60Hz, w/ Misc. Tooling, S/N: 21050620909 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6073355-01 All offers including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is an eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6073355-01 Contact Info: RTR Services Inc. 1-800-238-3294

Equipment located in O’Fallon, MO. 2021 Laguna Pro 75 Widebelt Sander (37" Capacity), 20HP, 3 Phase, 220V, 54Amp, S/N: 210204103 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6073355-03 All offers including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is an eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6073355-03 Contact Info: RTR Services Inc. 1-800-238-3294

LAGUNA PRO SHAPER SINGLE PHASE SHAPER The Laguna Pro Shaper combines a precision shaper with features normally found only in much higher priced machines.Specifications: -- 5HP 1 Phase 220V. -- Table size: 39-5/16″ x 31-7/16″ x 3-1/2″, -- Spindle travel: 4″ -- Spindle Sizes: 3/4″ and 1-1/4″Includes: 4 Roll 8 Speed Feeder