Woodworking Equipment For Sale

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Thomas Edgebander Return 42" x 19'

Thomas Return Conveyor This was used behind a Holzher Edgebander

Tidland 470 Sander This system was used in a particle board plant that has been closed around 10 years.

- Automated push feed saw system for fast and accurate cutting of wood and plastic - Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack - Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list - Value based optimizing allows the operator to value items in a cut list individually - Accuracy: +/- .012" - Push capacity: 90 lbs.(on flat tables) - Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" - Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" - Maximum clearance length for loading: 12' - Material feeds right to left - 24" wide x 18' long flat infeed table - 24" wide x 12' long roller outfeed table - Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) - Saw motor: 10 hp - Dust collection requirements: 600 cfm (4" dust port) - Air requirements: 85 psi (water and oil free air) - Electrical: 15 full load amps on 460 volt

Automated push feed saw system for fast and accurate cutting of wood and plastic Adjustable cutting envelope so you can set the envelope to the needed width of the material you are cutting, whether single piece or pack Tigersaw 1000's Dynamic Optimization software give you the best yield by determining the optimal cutting order from your parts list (Will cut the mark) Value based optimizing allows the operator to value items in a cut list individually Download parts files to Tigersaw 1000, comes with TigerLink 6 (Tigerstop's cut list downloading software) Accuracy: +/- .012" Push capacity: 90 lbs.(on flat tables) Cutting envelope with 450 mm blade: 1" x 16" up to 5" x 6" Cutting envelope with 500 blade: 1" x 16" up to 6" x 6" Maximum clearance length for loading: 12' Material feeds right to left 24" wide x 18' long flat infeed table 24" wide x 12' long roller outfeed table Complete guarding of the saw blade area, safety interlocked guard door and saw blade door (neither can be opened while running) Saw motor: 10 hp Dust collection requirements: 600 cfm (4" dust port) Air requirements: 85 psi (water and oil free air) Electrical: 15 full load amps on 460 volt INCLUDES: Tablet package: TigerTouch software loaded onto a Surface Pro tablet. Includes downloading software (DNLD), Dynamic optimization software (OPT), and TigerSET software (SET). Label printer

TIGER-TEC Rotary Vane Vacuum Pump:7 HP Oil-less (Dry) Rotary Vane Vacuum Pump System, rated at 82 CFM with max. 23.6"Hg; Heavy Duty construction, compact design, small foot print. -- 100% Oil-less Vacuum Pump is virtually maintenance-free with: Built-in carbon vanes & built-in suction filters; vacuum regulating valve with canister filter, motor speed of 1,440 RPM, 220V, 3phase, weight 133kg (293lbs)dimensions: 39"L x 18"W x 24"H

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. Specifications -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed speed from 20 - 60 FPM.Equipped with & Features -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, -- 0" - 6" opening. -- Infeed safety stop -- Adjustable shoes before and after each head. -- Controls mounted on belt loading side, --Sanding head motors with air caliper disc brakes, and motor load meters.

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

Timesavers 43" Speedsander Single Phase Machine

Single Head Top and Bottom Sander

TIMESAVERS 2321-23-1 Wide Belt Sander, (2) Heads37" Width capacity, Drum and Combination Drum/Platen HeadHead Configuration:1st Head: Rubber contact roll, 25 HP motor (8” diameter 70 shore rubber grooved contact roller)2nd Head: Combination head with a rubber covered contact roll 5-1/2" dia. and 2-1/2" wide polishing platen Specifications: -- 37" x 75" Abrasive belts. -- "Posi-Trak" electronic tracking & pneumatic tensioning. -- 15 - 45 FPM Variable feed speed with inverter control. -- Automatic conveyor belt tracking. -- Double infeed & outfeed spring loaded holddown rolls. -- 0" - 5" Max. motorized part thickness opening with automatic part thickness set-up, -- Air operated disc brakes and Motor load meters, -- 14" Infeed conveyor area, and infeed emergency stop bar.Equipped with & Features -- Quick release outboard support. -- Four bed jacks. -- Digital thickness readout. -- Centralized control panel.

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control PanelInfeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

TIMESAVERS 7537 WIDE BELT SANDER1-Head, 36" cap., 0 - 5" opening. Combination head with 4" Contact Drum & 2" adjustable Finishing Platen. Equipped with: 37" x 75" Abrasive belt cap., oscillation controlled by through-beam electronic abrasives belt tracking system. 20 HP Main drive motor, disc brakes on main motor. Power raising and lowering of the conveyor bedMechanical digital thickness indicator, motorized conveyor bed lift, and Double infeed & outfeed holddown rollers.15 - 45 FPM Variable conveyor feed speed, (4) bed jacks.Complete with:Quick release outboard support, infeed stop bar.Centralized control panel, hour meter, main motor percentage of motor load indicator.

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

--at Auction, Seller Loading, (2) 75HP Motors, Built to Last!-- TIMESAVERS 352 HDA 51" 2-Head Abrasive Planer/Sander 2-Head, 51" width cap. Heavy Duty Sander. - 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. - 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: - Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. - Motorized part thickness adjustment, 0" - 6" opening. - 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. - 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. - Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. - Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

TIMESAVERS 2321-23-21 Planer Sander 2 Heads2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. Helical head with (6) spirals of 4-sided carbide inserts, 25 HP motor. -- 2nd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor, sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments, -- Conveyor belt feed with variable feed speed 20 - 45 FPM, automatic conveyor belt tracking. -- Anti-kick back fingers on infeed; planer head with sectional infeed shoe and double holddown rolls on outfeed, double infeed and outfeed rubber covered holddown rolls on sanding head. -- Motorized part thickness adjustment 0" - 5" with mechanical digital readout; -- Minimum part length 15"; Pass line height 33"-38". Complete with: -- Controls mounted on belt loading side, air activated caliper disc brakes on all heads, load meters for each head and 14" infeed loading area. -- Dust extraction 3,500 CFM, Compressed air usage: 3 CFM @ 90 PSI, -- Total load amps at 230 Volts - 145 Amps.

TiMESAVERS 237-KA IC Planer Sander 2-HEADs (2) Heads Planer Sander Combination, 37" width capacity.Head Configuration: -- 1st Head: 7" Dia. Helical "Quiet Cut" planer head with (6) spirals of 4-sided carbide inserts with 15ø rake angle, head turns @ 3,200 RPM, head adjustment with dial indicator readout, 30 HP motor. -- 2nd Head: Combination Sanding head with 6" dia. contact roll (60 to 65 duro.) and 2-1/2" wide finishing platen, 25 HP motor; sanding head with 37" x 75" abrasive belt with "POSI-TRAK" electronic tracking.Feed System: -- Variable feed speed 15 - 45 FPM, automatic conveyor belt tracking, 3-ply rough top conveyor belt. -- Anti-kickback fingers on infeed, air loaded sectional shoe with dial indicator adjustment and double grooved pinch roll on infeed of knife head. -- Infeed & outfeed pinch rolls on sanding head, air activated caliper disc brakes on all heads. -- Motorized part thickness adjustment 0" - 6" with digital readout.Complete with: -- Controls mounted on belt loading side, main motor fuse protection on both heads, load meters for each head, "over thick" shut-off system and 24" infeed conveyor extension.