Woodworking Equipment For Sale

SCM P-170 Feed Through Moulder5-Head, 6-5/8" x 4-3/4" capacity. Specifications: -- Head sequence: Bottom 6.5 HP, right 6.5, left 6.5 HP, top 9 HP, Universal 9 HP motor; -- 1-13/16" Dia. spindles at 6,000 RPM, spindles equipped with high cap. precision bearings, all set-up adjustments on front side of machine. -- 15 - 85 FPM Feed speed, 3.6 HP Cardan (chainless) feed drive, motorized feed beam with air-loaded feed wheels.Complete with: -- 84" Long infeed table with quick lever thickness adjustment for stock removal, manual Waxilit bed lubrication. -- Note: No cutterheads or tooling included.

SCM "COMPACT 23" Feed Through Moulder5-Head (B-R-L-T-U), working cap. 9-1/16" x 4-3/4".Head sequence: -- Bottom 9 HP, right/left 12 HP, top 12 HP and univ. 9 HP motor.Specifications: -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. Mechanical digital readouts for all spindles. -- Variable feed speed 1.3 HP motor, 13 to 72 FPM. -- (5) Serrated infeed wheels, (2) rubber coated feed wheels on outfeed, powered roll on outfeed table, reference engravere on first bottom head, forward/reverse job push button and full sound enclosure.Includes - Heads for all 5 Spindles, and Dust Collection Manifold.

SCM K400 E --Specifications: -- Edge Capacity,0.4 to 6 mm (0.016to 1/4")for strip feeding. --Panel Capacity,min. width65 mmand 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2"). --Equipped with: -- Automatic strip & coil feed magazine, Teflon coated glue pot (heat-up time 10 Min), -- 3 mm cap. guillotine, 3-roll pressure unit. -- Startouch control system with large 12" screen, graphic display with one touch, memory capacity up to 60 working programs. --Workstations: -- Double motor front & rear end trim "K-2" mounted on THK guides (0.4 HP - 12,000 RPM) , tilts 0° - 15°, rapid set up between straight and angled cutting with the automatic tilting device. -- Top & bottom flush & bevel trims "RI/800" (0.7 HP - 12.000 RPM), bevels 0° - 15° with precision digital indicators for quick setup. -- Top & bottom "RAS/V" scraping unit with container with filter for long chips; -- Top & bottom buffing unit (0.25 HP - 2,800 RPM ). -- 36 FPM Fixed feed speed, 0.75 HP feed drive.÷Complete with: --Full cover sound enclosure, mechanical digital readouts for setup adjustments, frequency inverter and outboard panel support. --Actual Model: "OLIMPIC K 400 E".

SCM OLIMPIC K208ER EDGEBANDER WITH CORNER ROUNDING15/32" (12 mm) Max. edge cap., 2" max. (w/corner rounding only 1-3/4") banding height, 2-3/8" min. panel width and 6-5/16" min. length.Equipped with: -- Automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon coated glue pot with glue roller application system complete w/automatic recycling device for unused glue. -- Digital thermostat adjustment for temperature control. -- 3-roll pressure unit w/pneumatic controls for all pressure rollers.Workstations: -- Double motor front & rear end trim (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide. -- Top & bottom fine/radius trimmer w/pneumatic positioning from control panel. -- Corner rounding units for leading & trailing edges. (2) 0.5 HP - 200 Cy Motors ea. -- Top & bottom PVC scraper for up to 5 mm radius. -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). -- Hot air heating unit for PVC/ABS. -- Single 42 FPM fixed feed speed, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks.Complete with: -- Microprocessor for line control & glue temperature (can store up to 50 preset programs), swiveling control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency inverter w/automatic motor brakes for all HF motors; includes used tooling. NOTE: Video of equipment was made in February 2021, prior to being decommissioned and placed in storage fully wrapped and ready for transport.

SCM OLIMPIC K 201 HFA Automatic Compact Edgebander, with 3 mm Max. Coiled Edgebanding Thickness & High Frequency MotorsSpecifications: -- Edgebanding thickness cap. (for both coil & strip) 0.4 - 3 mm (0.02" - 0.19"). -- Min. panel length for coiled edges (Min. width 200 mm) 140 mm (5.51"). -- Min. panel width for coiled edges 65 mm (2.56"). -- Panel thickness 8 - 40 mm (0.31" - 1.57"). -- Feed speed 9 MPM (29 FPM).Equipped with: -- Automatic adjustment of all units when panel thickness is changed. -- 20" Dia. Coil table. -- Automatic coil feed magazine, Manual strip feed. -- Teflon-coated glue pot. -- 1.2 mm (0.05") Cap. guillotine. -- Eye-level control, with GEFRAN "1000" LED Temperature controller. -- Adjustable feet.Workstations: -- Single-motor end trimming unit, with (1) 0.19 kW (1/4 HP) 12,000 RPM High-frequency motor & Copying device. -- Top & bottom flush trimming unit, with (2) 0.35 kW (1/2 HP) 12,000 RPM High-frequency motors and Front & Vertical copying devices.

SCM UNO CS Wide Belt Sander37" Wide cap., 1-Head machine;Specifications: -- Combination head with 4" dia. 85 shore grooved rubber contact drum and 2" wide finishing platen; -- 18 HP motor; 37" x 60" abrasive belt size; 0.87 HP 2-speed feed - 15 & 30 FPM. -- Powered raise and lower w/ LED digital readout; 6-1/4" max. thickness cap., 12-1/2 min. material length. -- Includes: 5-1/2" dia. dust outlet, infeed, and outfeed hold-down roller and load meter.

SCM SANDYA 15S (3) Head Wide Belt Sander42" Width cap, Drum, Drum, Combination HeadHead Configuration:1st Head: Steel contact roll, 7" dia., 35 HP motor;2nd Head: Rubber-covered contact roll, 24 HP motor3rd head: Combination head, rubber-covered contact roll (45 Shore) and 3" wide finishing platen, 17.4 HP motor.Specifications: -- 43" x 103" Abrasive belts -- Electronic tracking & pneumatic belt tensioning, abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 4 HP motor -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacksEquipped With & Features: -- LED readout, 0" - 6-1/4" opening. -- Infeed & outfeed spring loaded rubber covered hold-down rollers -- Motor load meters -- Infeed and outfeed roller conveyor extensions.

SCM SANDYA - 40 M3 135, ...3-Head Wide Belt Sander 52" Width cap. Drum, Drum, Combination HeadHead Configuration:1st Head: Steel Contact 22 kW Pneumatic blowdown and alignment.2nd Head : Rubber Contact 18.5 kW Pneumatic blowdown and alignment.3rd Head: Combination Platen 15 kW Pneumatic blowdown and alignment.Note:The SCM sander does not have a brush. After the 3rd head, it has this pneumatic blow-off bar with multiple blow-offs running the length of the sanders width. Sander can be seen under power if needed.Specifications: -- 53" x 103" Abrasive belts with electronic tracking. -- All heads with abrasive belt grit compensation. -- Conveyor belt feed with dual feed speed, 5 HP motor. -- Automatic part thickness adjustment. -- Motorized thickness opening via (4) precision conveyor bed jacks with LED readout. --0" - 7-7/8" opening. -- Equipped with & Features -- Outfeed rubber covered holddown rolls or shoes on all heads. -- Motor load meters. --Infeed and outfeed conveyor extensions. -- WYE-DELTA soft start.Note: The SANDYA model "40" is more or less the same as the SANDYA "30" but more Heavy Duty.

SCMI SANDYA 20 ( 20 M2 135 ) Wide Belt Sander 2 Heads(2) Head 53" Width capacity , Drum, Combination HeadHead Configuration:1st Head: Grooved steel calibrating roller with 250mm (10") diameter with 42 HP main motor2nd Head: Combination head with 175 mm (7") grooved rubber finishing roller and finishing platen; with 30 HP main motor.Specifications: -- Working width 53 " rubber vacuum feed mat w/ vacuum blower (Small parts option) -- Grooved rubber coated pressure roller in first position for increased panel grip with multiple pieces. -- Maximum Work Piece Thickness 6.25". -- Min. Work Piece Length 17". -- Abrasive Belt Size 53" x 103". -- Compressed Air Requirements 5 CFM @ 80 PSI. -- Dust Outlets: 2 outlets @ 7.7 inches. -- Exhaust Requirements 3,600 CFM.Feed System: -- 3 HP variable speed feed -- Feed speed is from 15 FPM to 70 FPM. -- Automatic conveyor belt tracking. -- Infeed and outfeed table extensions with (2) support rollers each.Equipped with & Features: -- Automatic Table Positioning Device. -- Electronic digital thickness readout of work table position. -- Front and rear emergency stop buttons. NOTE: Some spec's need to be verified

SCM Sandy 10 -RCS-110 Wide Belt Sander (2) Heads43" Width cap. Drum, Combination HeadHead Configuration:1st. Head: 7" diameter corrugated metal roller for calibration 35 HP ( Drives both Heads )2nd Head: Combination head with 7" dia. contact roller (spiral grooved rubber covered); air/jump finishing platen controlled with timers to eliminate any rounding on leading & trailing edges of the panel, 2" wide platen.Specifications --103" long x 43" wide Abrasive belts --Air tracking, floating & rigid bed for sanding of veneers & solid panels; infeed & outfeed spring loaded holddown rolls -- Minimum workpiece length 16" --Thickness capacity 6.25". --Separate 2.5 H.P. variable speed feed motor delivering feed speeds from 15 to 70 FPMNote: The seller has 20 boxes of various sandpaper belts (80 – 150 grit) that will be included.

SCMI - T110, ...Shaper w/4-Roll Power FeederSpecifications: -- 6.6 HP Motor, 1-1/4" interchangeable spindle tilts -5° to +45°. -- (5) Spindle speeds: 3,000 - 4,500 - 6,000 - 8,000 & 10,000 RPM. -- 39" x 29-1/2" Table; 13.4" max. insert opening, digital readout for spindle height setting, 6-1/8" working height under nut; adjustable fence guard assembly. -- Complete with: Mechanical spindle brake, hand spindle lock, reverse rotation switch, (5) table insert rings, and (2) 3" dust outlets. -- Includes: 4-Roll HEBROCK Power Feeder with: (4) 4-1/2" dia. & 2" wide rubber feed rollers; (4) speeds forward, and reverse adjustable mounting column w/locking joints & reversing switch.Skidding and crating, please add: ...$ 250.

SCMI K 208E SINGLE SIDED EDGEBANDER5/16" (8 mm) Max. edge cap., 1-3/4" max. banding height, 2-3/8" min. panel width and 6-/14" min. length. Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat up time 10 Min), upgraded to Heavy Duty 3 mm PVC cap. guillotine, 3-roll pressure unit w/pneumatic controls. 42 FPM Fixed feed speed via 1 HP drive.Workstations: -- Double motor front & rear end trim (0.3 HP - 12,000 RPM motor ea.), tilts 0° - 15°, End trimmer mounted on 45° THK guides. -- Top & bottom trim station (0.8 HP - 12.000 RPM motor ea.), bevels 0° - 15°. -- Top & bottom PVC scraper for up to 5 mm radius; -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). Complete with: Swivel control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency converter & tooling.

SCMI SANDYA 3 Wide Belt Sander, (2) Heads37" Width cap. Drum, and Combination HeadHead Configuration:1st Head: 4" Dia. Steel Contact Drum 2nd Head: Combination head, rubber-covered contact roll, 4" dia. and 2" wide finishing platenSpecifications: -- Air jump platen with timers to control raise & lower of platen on leading and trailing panel edge. -- 30 HP motor driving both heads. -- 37" x 75" Abrasive belts with electronic tracking and pneumatic belt tensioning.Feed System; -- Infeed & outfeed spring loaded holddown rolls. -- Dual feed speed 15 & 30 FPM, 0.5 HP feed drive. -- 0 - 6" Motorized thickness opening via (4) precision conveyor bed jacks with LED readout.Equipped with & Features: -- Automatic part thickness adjustment. -- Motor load meters -- 21" infeed & outfeed conveyors each with (2) rubber-covered rolls -- (2) 5" Dust ports.Note from the seller: Lightly used machine in a two-man shop, primarily sanded our face frames for kitchen jobs, which amounted to a couple sets a month. works well, had an opportunity to purchase a bigger sander so this one is redundant.

SCM SIGMA SZ 110 PLAST Automatic Panel Saw;This machine is Ideal for Plastic Materials. -- Specifications: Working cap. 149.6" (3,800 mm) Max. rip cut cap. 149.6" (3,800 mm) pusher stroke; 4.5" (115 mm) max. saw blade projection.24 HP (17.8 KW) main saw motor Inverter controlled for various plastics, variable speed from 0 - 3,900 RPM; 2 HP (1.5 kW) scoring saw motor (4,200 RPM).Main blade diameter: 15.75" (400 mm), Main blade arbor diameter: 80 mm; Scoring blade diameter: 7.87" (200 mm), Scoring blade arbor diameter: 80 mm.Manual scoring blade adjustment with digital indicator. Automatic exclusion of scoring unit when motor is in off position. -- Saw carriage: Feed speed 0 - 442 FPM (0 - 134 MPM), return speed 442 FPM (134 MPM),Automatic saw carriage lubrication, balanced on hardened cylindrical guides; external score saw adjustment, THK guides for vertical saw movement. -- Pusher Fence Feed Speed 0 - 230 FPM (0 - 70 MPM) forward speed, 230 FPM (70 MPM) reverse speed.Programmable rear fence with (9) material gripper clamps with twin fingers for thin materials, rack & pinion movement,Grippers fit into a slotted pressure beam for positive material control during the final cut. -- Operator & Machine Control:PC front-end with SCM Real-time "WinCut" + Windows "7" operating system; Pentium 300 MHz, 6.4 GB hard drive, 64 MB RAM,17" Color VGA flat panel Touchscreen monitor, on-screen diagnostics & production reports; (2) serial ports & (1) parallel port, spacing available for networking cards. "Cutty" optimization software is included which allows for (2) different sheet sizes and (22) different parts, each part is allowed a max. quantity of 300. -- Complete with: Side alignment device: Min. part width 2.8"; Max. part width 47.24". Rear support rails with rollers.(1) Front fixed air table 98" x 23" (2,500 x 584 mm), (2) Adjustable air tables 98" x 23" (2,500 x 584 mm).Plastic safety guards, emergency stop bar; enclosed cutting area; triple dust collector outlet.Actual model is SCM SIGMA SZ 110 PLAST.

SCMI MINI-MAX ME 25 EDGEBANDER, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.Workstations: -- "ME 25" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters. -- Top & bottom scraping station. -- Top & bottom buffing, 3,000 RPM motors.22 FPM Fixed feed speed with 0.8 HP drive.Complete with: Sound enclosure, out rigger panel support, frequency converter, and used tooling on the stations.Features: Control Panel on machine infeed side Machine frame made of high rigidity ribbed steel to guarantee excellent support Top thick steel pressure beam with rubber coated wheels Manual adjustment of top beam with Auto positioning of operating units Numeric indicator of selected panel thickness Glue smoke-specific exhaust outlet; centralized extraction of the dust Panel support roller which can be extended the entire length of the machine

SCM OLIMPIC K 360TE COMPACT EDGEBANDER WITH PRE-MILLING .Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016to 1/4") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°. Controls: -- Orion 1 Plus Controller, fixed at in-feed of machine. with soft keys, graphics and 4" LCD display panel. It handles most machine set-up functions and workstations. Complete With & Features: -- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support.Condition: ATFS

SCM Sandya 7 S Wide Belt Sander (2) Heads43" Width cap, Drum, Combination HeadHead Configuration1st Head: Contact roll, 6-1/4" dia., 25 HP motor; 2nd Head: Combination head, rubber-covered contact roll, 6-1/4" dia., and 2" wide finishing platen, 18 HP motor.Specifications: -- Great solid wood finish Sander. ÷ 43" x 75" or 85" Abrasive belts with electronic tracking & pneumatic belt tensioning. -- Conveyor belt feed with variable feed speed, 10 - 60 FPM, 3 HP motor, -- Automatic part thickness adjustment, motorized thickness opening with LED readout, -- 0" - 6-1/4" via (4) precision conveyor bed jacks.Equipped with & Feature: -- Infeed & outfeed spring loaded rubber covered holddown rolls on all heads, -- Motor load meters -- Infeed and outfeed conveyor extensions.

SCMI OLIMPIC K 600 T-ERL EDGEBANDER (W/PRE-MILL/CORNER ROUNDING): -- Specifications:0.4 to 3 mm For roll feeding and up to 8 mm for strip feeding.Panel Capacity: Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5").Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 508 mm (20").Feed speed 36 and 52 FPM (2.5 HP feed motor) -- Equipped With:Adjustable In-feed Fence:Manually pre-set with digital indicator, pneumatic in/out positioning. 1-Coil feeder: For banding up to 3mm thick with a 3 mm guillotine.Gluing Station:For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 8-10 Min.Pressure Section:Manual digital positioning: Teflon-coated pneumatic driven roller & (2) spring-loaded idle rollers. Includes "Strip Feed Magazine" -- Workstations:End Trimming Station: "K-SEL 2" Front & rear 0.5 HP, 12,000 RPM motor mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. Top & Bottom Trimming Unit: 2 x 1.0 HP - 12.000 RPM Motors capable of tilting 0 to 25 degrees with copy wheels. Pneumatic positioning for (3) settings, flush/bevel/radius trimming via precision digital indicators to go from 3 mm PVC to thin tape through the controller for quick setup.Two Motor Corner Rounding:(2) 0.80 HP independent motors that slide on THK guides. The features of the "Round-K" (SCM patent) allow for the double function of both the simultaneous trimming and rounding operations Top & Bottom Profile Scraping Unit: "RAS/K" profile scrape station for 3 mm PVC with pneumatic positioning, with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: "STARTOUCH" Controller with 12" touchscreen display, capable of storing 100 programs.Machine automation by PLC function and encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding. -- Features & Complete With:1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units;Manual adjustable hold-down pressure beam;Full sound enclosure cover and outboard panel support.Adjustable side support. Replaceable track pads. Digital inverter for electronic motor braking Acoustical safety enclosure.Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency.Suitable Transformer for 230V to 600V, 3 Ph. Actual model is SCM OLIMPIC K 600 T-ERL.

SCM - S520 E, ...Planer Specifications: -- 20" Width cap., 9 HP main motor - 4-3/4" dia. 4-knife TERSA cutterhead at 4,500 RPM. -- 1/8" - 9-1/4" Powered opening with digital readout for fine adjustment; max. depth of cut 5/16"; 10" min. length of workpiece. -- (4) Feed speeds: 20 - 33 - 43 & 56 FPM; table size 20-3/4" x 39".Equipped with: -- Chipbreaker, sectional grooved infeed & solid outfeed rollers, (2) adjustable bed rollers. -- Complete with: Magnetic starter & shaving hood.

SCM SANDYA 3-RCS-95 Wide Belt Sander 9 ( 2 ) Heads36" width cap. Drum, PlatenHead Configuration1st Head : Contact Drum2nd Head : Combination HeadSpecifications: -- 1st Head: Contact roll, 4-3/4" dia.; -- 2nd Head: Combination head, with rubber covered contact roll, 4-3/4" and 2" wide finishing platen -- Both contact rolls & platen with cam height adjustments. -- 30 HP Motor driving both heads;Equipped with & Features -- 37" x 75" abrasive belts -- Electronic tracking and pneumatic belt tensioning. -- Infeed & outfeed rolls, -- Dual feed speed of 15 & 30 FPM, -- 0.5 HP feed drive -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacks with LED readout, -- 0" - 6-1/4" opening. -- Motor load meters, -- Infeed & outfeed conveyor roller extensions, (2) 5" dust ports.