US Concepts Shaper For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
7 Results Found
Sort By 
STANDARD LISTINGS
2019 US Concepts CHB-12  Shaper
$34,960

The CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. -- Equipped with 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. A backup board in the table and climb cut assure the clean cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. -- STANDARD FEATURES: Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm). -- Complete with: (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

Torry Hiddema
800-374-5009 ext:371
Call

2016 US Concepts CHB-12  Shaper
$17,500

US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clamped material. A backup board in the table and climb cut assure the clean cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. -- Spindle Dia. 40 mm, Spindle Length 12" supported on both ends; Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor. -- Complete with: (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; 2 Dust Outlets @ 6" (150 mm); Machine weight 1,650 Lbs (750 kG).

Torry Hiddema
800-374-5009 ext:371
Call

2019 US Concepts CHB-8  Shaper
$37,375

The CHB-8 Hauncher is designed to make cuts (notches) along the edge of the board or across the end of it. Typical application are: box joint cuts, finger joints, hinge notches, coping, moulding end profiling in furniture and window industries, profiling of the square balusters, decorative cuts of mantel supports, beaded frame cabinets, toe kick notches, etc.. -- Equipped with 40 mm or 1.5" dia. horizontal spindle that moves up hydraulically past the table with the clamped material, the user friendly CHB-8 is just as flexible as you are to keep pace with requirements. A backup board in the table and climb cut assure the clean cut, even on cross grain. Material air clamps and spindle motion are actuated by a foot switch. This machine could be easily synchronized with automatic positioning system like TigerStop or others. -- STANDARD FEATURES: Spindle Diameter 40 mm or 1-1/2"; Spindle Length 8" (205 mm); Max. Cutter Diameter 8" (205 mm): Max. Cutting Depth 2" (50 mm); Max. Material Height 4" (100 mm); Spindle Speed 6200 RPM; Feed Speed (Air/Oil) 0 - 21 FPM; Dust Outlet 6" (150 mm); Motor 7.5 HP (5.5KW); Air Clamps 2; Back Fence; Side Pivotable Stop; 1M Stop Bar; Table Size 28" x 12"; Machine Weight 1160 lb (527 kg). -- OPTIONS: 230V 1 phase, 575V, or 380V electric; 10 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar; Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars); I/O contacts to synchronize with TigerStop or others.

Torry Hiddema
800-374-5009 ext:371
Call

2019 US Concepts FAS-HD  Shaper
$32,960

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

Torry Hiddema
800-374-5009 ext:371
Call

2019 US Concepts FAS-LX  Shaper
$24,980

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze. -- The Floating feed system is user friendly and easy to set up. -- The Spindle can be adjusted from Horizontal to 52° to insure the proper cut on the parts you need!

Torry Hiddema
800-374-5009 ext:371
Call

US Concepts FAS-LX  Shaper
$14,950

U S CONCEPTS FAS-LX ARCH MOULDER7.5 HP Belt drive motor to horizontal arbor, 6,200 RPM spindle speed, tilting arbor from horizontal to + 52ø, 1-1/4" dia. x 6" useable arbor, 4-1/4" max. height adjustment, 6-1/2" max. tooling dia. -- Variable feed speed from 0 - 30 FPM with 0.5 HP gear head motor,floating feed system with (5) powered feed rollers; 48" x 30" steel table top. -- Complete with: Cutterhead guard, center guide roller, 6" dia. dust outlet, push button starter w/overload protection.

Torry Hiddema
800-374-5009 ext:371
Call

US Concepts FAS-LX  Shaper
$9,800

US CONCEPTS MODEL FAS-LX 6" UNIVERSAL ARCH MOULDER: -- 7.5 HP Belt drive motor to horizontal arbor, 6,200 RPM spindle speed, tilting arbor from horizontal to + 52ø, 1-1/4" dia. x 6" useable arbor, 4-1/4" max. height adjustment, 6-1/2" max. tooling dia. -- Variable feed speed from 0 - 30 FPM with 0.5 HP gear head motor, (5) horizontal powered floating feed rollers, 28" x 36" steel table top. -- Complete with: Cutterhead guard, center guide roller, 6" dia. dust outlet, push button starter w/overload protection, digital readouts for radial and axial spindle adjustments, operator manual & parts list. -- Options include variable feed speeds and forward/reverse controls for spindle rotation & feed (climb-cutting).

Torry Hiddema
800-374-5009 ext:371
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved