Renzo Borgonovo Wood Finishing For Sale
4 Results Found
Call for Price
Compact design, four station Spray Machine with 3/4" to 12" width cap. (8" is standard, 12 " is as an option), 3-1/4" max part thickness and 39" min. part length. -- Standard specifications: (4) Gun mounts made from aluminum rods and HDPE mounting brackets, for connections for (4) HVLP automatic spray guns, and (1) dual diaphram fluid pump. (Guns and Pumps are not included) -- Complete with: Teflon coated recovery cabinet for each spray station and easy rollout feature, front access door with large viewing window & gas shock support arms. -- Machine is operated with a central control panel and gun timing is controlled by a PLC that times the spray guns in relation to the length of the work piece and feed speed. PLC records number of work pieces and total linear feet processed in session. -- Machine is set up with infeed and outfeed conveyors that operate at any speed between 60 and 300 fpm and is made up of Anti Static and Anti Solvent belts and intermediate steel rollers between spray stations. -- 11.8" Dia., 1.5 HP exhaust fan rated at 2,400 CFM. -- Feeding: (2) 30 - 250 FPM Variable speed conveyors (1 infeed & 1 outfeed each 5' long); working height 35-3/8". -- This single station unit integrates easily into any line whether as a primary unit or as an intermediate step; it can be supplied in a one, two or three gun configuration. - Overall length less than 8'. The Machine is priced with no guns or supply installed, these will need to be added by buyer or a separate quote can be requested for guns and supply pumps.
This 2 ARM AUTO STACKER has been specially designed to facilitate the loading of moulings, picture frame strips and other processed lineal parts onto drying racks. It eliminates the manual handling of workpieces which can mar the fininsh. It also increases productivity and efficienchy comparde to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time. -- Workpiece Length are 3,000 mm (118") Max. & 1800 mm (72") min. workpiece length, 20mm Min. and 150 mm (6") max. material width cap. -- Stacking Capacity - 20-30 pieces per minute -- Overall Height 2200mm(87") - Overall Width 2300mm(91") - Overall Length 3400(134") Work Height At Infeed 860mm(34") Racks has 11 arms that extend out approximately 39" with 4" in between arms. -- Automatically loads just-painted mouldings onto air drying rack -- Process: As moulding exits coater it is moved by belt conveyor to (2) arms which lift the piece up-and-over the top of the stacker station; coming down the other side it places the moulding onto (2) arms, and a belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- One rack included.
RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency comparde to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms. -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up-and-over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- This Stacker comes with (1) rack; additional racks available priced at ...$ 1,550 each
AUTOMATIC SANDING AND BUFFING MACHINE MOD. « MVS 2500 »FOR LINEAR FRAMES AND PROFILES-------------------------------------------------------------------------------------------------------Realized for sanding and buffing of frames, rods, ledges and fitting parts of veneer, solid, raw or varnished wood, etc. (processing of 3 sides for each pass). ADVANCING SPEED ELECTRONICALLY VARIABLE BY INVERTER FROM 10 TO 50 M/MIN. Total power kW 10,5 (14 Hp.)Compressed air Atm 6Total exhaust capacity m3/h. 2800 (25 m/sec.)Working height mm. 10 min. mm. 100 max.Working width mm. 20 min. mm. 200 max.Working length mm. 1200 min.DISC SANDING UNITS TYPE “SCOTCH BRITE” (N° 4)Power motor Hp. 3 (2.2 kW) Rotation speed r.p.m. 1400Disc sanding unit holder shaft diameter mm. 30Spindle-disc sanding unit connection flange diameter mm. 76Disc sanding unit diameter mm. 200 max. Disc sanding unit height mm. 100 max. Dust suction hood diameter mm. 100Extraction rate m3/h. 700 (25 m/sec.)