Panel Saw For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 4
67 Results Found
Sort By 
Recently Added Items
2016 Holzma HPL 400
Call For Price
2016 Holzma HPL 400
2012 Holzma HPL 380
Call For Price
2012 Holzma HPL 380
2012 Giben ICON 1
$27,900
2012 Giben ICON 1
STANDARD LISTINGS
A and S Machinery 781  Panel Saw
Call for Price

A&S Machinery Panel Saw Model 781 10 HP 230 Volts 3 Phase Includes Multiple Saw Blades and Sizes

Carolina Used Machinery
828-773-2204
Call

2006 A and S Machinery Profiline  Panel Saw
Call for Price

This machine is still under pwoer and in good condition. Reported to have less than a few hundred hours of use.

Carolina Machinery Sales, Inc
704-288-1904
Call

1984 Altendorf F90  Panel Saw
Call for Price

Altendorf F90 Sliding Table Saw

Carolina Machinery Sales, Inc
704-288-1904
Call

2012 Biesse Active 400  Panel Saw
Call for Price

3200mm sliding table • Independent motor for main blade and scoring saw • 400mm blade diameter and 125mm Scribe • Sawblade tilting from 90 to 45 degrees • Table locks to allow easy panel loading • Table extension on outfeed side This saw was put into storage in good working condition.

Carolina Machinery Sales, Inc
704-288-1904
Call

2020 Cam-Wood TX-P12AAT  Panel Saw
$49,800

CAM-WOOD TX-P12AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar;0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost; &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P12AAT

Bob Bullin
800-374-5009 ext:346
Call

2020 Cam-Wood TX-P10A  Panel Saw
$28,900

CAM-WOOD TX-P10A Front-Load Manual Panel SawSpecifications: 128" Max. rip cut cap. & 128" max. front/back, 10 HP saw blades motor, 1" dia. arbors, 4" max. depth of cut with 355 mm (13.97") dia. blade at 4,500 RPM, 160 mm (6.30") scoring blade at 6,500 RPM blade speed. -- Features: 1 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM, return speed of 98 FPM. -- Equipped with: (2) Flip stops and (2) air cylinder stops on fence; (3) front support tables (optional air tables available - add $ 3,690), Steel rear tables, (3) dust collector outlet/connections, (1) on each end of the saw base and (1) on the right-hand side at cut-line height.

Jim Reedy
800-374-5009 ext:455
Call

2020 Cam-Wood TX-P10AAT  Panel Saw
$43,900

CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar;0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost; &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P10AAT

Bob Bullin
800-374-5009 ext:346
Call

2005 Gabbiani GALAXY 105 T  Panel Saw
$94,500

GABBIANI GALAXY 105 T REAR LOAD, AUTOMATIC PANEL SAW W/VACUUM LOADING/UNLOADING + STORAGE & RETRIEVAL: -- Specifications:126" (3,200 mm) Overall rip cutting cap.; 4.1" (105 mm) max. saw blade projection; 20 HP (15 kW) Main motor w/pneumatic saw blade "quick change" system, 2.4 HP (1.8 kW) scoring motor with "Electronic Adjustment" form the control panel.14.9" dia. (380 mm) - 3,900 RPM main & 4.1" dia. (105 mm) - 6,350 RPM scoring blade; Independent rising of main saw and scoring saw units. -- Saw Carriage: Variable feed speed from 0 - 492 FPM (0 - 150 MPM), return speed 492 FPM (150 MPM).Powered by SIEMENS AC brushless motor on rack & pinion system. -- Pusher Fence:(7) Material gripper clamps, forward speed from 0 - 295 FPM (0 - 90 MPM), return speed 295 FPM (90 MPM), Powered by SIEMENS AC brushless motor on rack & pinion system.NOTE: Pusher fence forward speed is currently set to EC standard of 82 FPM (25 MPM) -- Operator & Machine Control:PC front end with "WinCut" + Windows "XP" operating system, 15" color monitor, keyboard, 1.44MB floppy disk & CD-ROM drive for data transfer, USB & RS-232 ports for possible downloading from an office PC. -- Rear Table: 126" x 72.8" (3,200 x 1,850 mm) max. panel size; max. bunk height 23.62" (600 mm).Rear roller conveyor bed with (2) integrated front & cross-aligning units before cutting to prevent offset panels within the same book. -- Complete With:(4) Front Air float tables 110" x 25.5" (2,810 x 650 mm). -- Options Include:Mahros Runner 3 & Assi 8-position Storage and Retrieval system:MAHROS RUNNER Overhead gantry loader made of two portal frames that support the horizontal carriage with the suction cup vertical arm. The system is designed to have two input deposit stations for new stacks, eight storage stations and one feeding station for the panel saw.The machine is thoroughly automatic and does not need any manual adjustment. The horizontal movement of the carriage and the vertical movement of the arm are done with prismatic guides with re-circulating spheres with and automatic lubrication. These movements are given by timing belts and motors driven by inverter.The cup holding frame for panel manipulation is composed of eight cross bars each one with (4) vacuum cups. The PLC, equipped with keypad and programming display, controls the working cycle and provides the axes interpolation to shorten the arm path.A PC near the two feeding stations allows the operator to manage the feeding of new boards from the two feeding stations to the eight storage stations.Label printing is activated in the controller & the label printer is included -- Actual model is GABBIANI GALAXY 105T BR + Mahros Runner 3 & Assi 8-Position Storage and Retrieval System

Bob Bullin
800-374-5009 ext:346
Call

2006 Gabbiani GALAXY 105  Panel Saw
$39,700

GABBIANA GALAXY 105 FRONT LOAD, AUTOMATIC PANEL SAW -- Specifications:177" (4,500 mm) Overall cutting length, 169" (4,300 mm) pull-back cap., 4.1" (105 mm) max. saw blade projection.15 HP (11 kW) Main motor w/pneumatic saw blade "quick change" system; 3 HP (2.2 kW) "POSTFORMING" scoring motor; 15.7" (400 mm) dia. - 4,500 RPM main & 6.2" (160 mm) dia. - 7,200 RPM, scoring blade with external adjustment. -- Saw Carriage:Travel speed from 0 - 492 FPM (0 - 150 MPM), 492 FPM (150 MPM) constant return; powered by SIEMENS AC brushless motor. -- Pusher Fence:(8) Material gripper clamps; variable pusher speed from 0 - 295 FPM (0 - 90 MPM), return 295 FPM (90 MPM), powered by SIEMENS AC brushless motor on rack & pinion system.Alternate pressure beam for final trim cut; (2) automatic pneumatic side aligners with rollers on front & back of the cut line. -- Operator & Machine Control: Includes PC Front-End with GABBIANI "SEZIONA" + Windows "XP" operating system.15" Color monitor, industrial keyboard & mouse, 1.44 MB & CD ROM disk drives for data transfer, (2) RS-232 port capability for possible downloading from the office. -- Complete with:(1) Air float table 98" x 19.6" ( 2,500 x 500 mm) & (2) air float tables 59" x 19.6" (1,500 x 500 mm). -- Actual model is GABBIANI GALAXY 105/4500 PF.

Bob Bullin
800-374-5009 ext:346
Call

1996 Giben FASTMATIC 3200  Panel Saw
$15,250

GIBEN FASTMATIC 3200 CNC Front Load Panel Saw... Cutting length 3,200 mm (126"), pusher stroke 133", cutting height 3-1/8" with 13-3/4" dia. bladeSpecifications and Speeds/drives: -- Saw carriage travel 16 - 131 FPM, return speed 131 FPM, inverter driven, powered by 1.75 HP motor. -- Pusher fence feeds from 3.3 FPM slow forward to 80 FPM fast, 180 FPM return speed, powered by DC servo motor on rack & pinion system. -- 12 HP Main motor & scoring unit, 3,800 RPM main & 6,000 RPM scoring blade. -- Rear table with closely spaced in-line rollers in narrow profile rails. (7) automatic controlled.Controller: -- MCL (Motorola MC 88HC11) controller with LCD display, features operating menu for Edit, Execute, Parameters, Automatic Downloading & Help; Data entry by keypad or directly via cable from a PC, stores up to (250) cutting patterns with up to (64) sizes, repeatable 99 times. Complete with: -- Heavy duty cross cut fence, pneumatic side aligner on both sides of cutting line; -- (1) 510 x 2,000 mm on cross cut side and (2) 510 x 1,300 mm air flotation tables. -- Ontario Hydro approved electrics.

Jim Reedy
800-374-5009 ext:455
Call

2004 Giben SMART 75 SP  Panel Saw
$22,500

GIBEN SMART 75 SP CNC Front Load Panel Saw... Specifications: -- 149" (3,800 mm) Overall cutting length, 2.95" (75 mm) max. blade projection, 15 HP (11 kW) main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 164 FPM, return speed 164 FPM (40 MPM); powered by AC brushless motor with inverter. -- Programmable pusher fence with (7) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (0.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke.The SMART 75 SP is equipped with: -- "PC" Front end controller with: Windows "XP" operating system, Pentium 300 MHz processor, 64 MB RAM, 4.8Gb hard drive, floppy & CD drives, (2) RS 232 serial ports, MOELLER PLC, (1) PCI network slot. -- 15" SVGA color monitor, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (9) in-line nylon profile rail tracks; pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. Includes: -- Safety trip bar, safety flaps at cut-line, protection fence around rear of saw. -- (1) Air flotation tables 79" x 20" (2,000 x 510 mm), (3) Air flotation table 51" x 20" (1,300 x 510 mm).

Jim Reedy
800-374-5009 ext:455
Call

2004 Giben SMART 75 SP  Panel Saw
$16,750

GIBEN SMART 75 SP CNC Front Load Panel Saw129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection.Specification & Features: -- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 131 FPM (5 - 40 MPM), return speed 131 FPM (40 MPM); powered by AC brushless motor with inverter. -- Equipped with: Programmable pusher fence with (6) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke. -- Features: "PC" front end controller with: Windows "XP" operating system, Pentium processor, 64 MB RAM, 4.8 GB hard drive, floppy & CD drives, (2) RS 232 serial ports, (1) PCI network slot, 15" SVGA color monitor."MOELLER" PLC, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (8) in-line nylon profile rail tracks; Pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Complete with: Safety trip bar, safety flaps at cut-line, protection fence around rear of saw,(1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation tables 51" x 20" (1,300 x 510 mm).

Jim Reedy
800-374-5009 ext:455
Call

2016 Giben ICON FAST  Panel Saw
Call for Price

GIBEN ICON FAST SPT 3800 REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Overall cutting length, 150" (3,850 mm) pusher stroke; 5.9" (150 mm) max. saw blade projection, 40 HP (29.3 KW) Main saw motor, 3 HP (2.2 kW) scoring saw motor. -- Saw Carriage:Variable saw carriage speed from 0 - 780 FPM (0 - 240 MPM), return speed 780 FPM (240 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (7) pneumatic gripper clamps, grippers open to 5.9" (150 mm).Forward pusher speed 3.2 -262 FPM (1 - 80 MPM), return speed 62 FPM (80 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Rear loader:Lift table 62.9" X 149.6" (1,600 mm X 3,800 mm), stack loading direction: rear. Maximum bunk height 32.6" (830 mm) Lift table stroke: 35.4" (900 mm), lift table speed 1.4 meter/min. (1) rear power infeed roller conveyor 3,800 mm X 1,600 mm. Set of (3) power roller for infeed conveyor and (3) for lift table Operator & Machine Control:PC front end with Giben "G-Vision" + "Windows XP " Multitasking operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible.Giben "G-Vision" guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.). Giben "G-Vision" includes an onboard optimizer which can be accessed at any time directly at the machine.The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(12) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:(1) Independent automatic side/crosscut aligning device with 2.75" - 49.2" (70 - 1,250 mm) stroke. 90" (2,300 mm) Long crosscut fence (front-to-back);(3) Front mounted air floatation tables 20" x 78" (510 x 2,000 mm). (2) Front air flotation table 31.5" X 51" (800 mm X 1300 mm) -- Complete with:"Quick Change" saw blade system; "REMOTE" electronic scoring adjustment. -- Actual Model is GIBEN ICON FAST 140 SPT 3800

Bob Bullin
800-374-5009 ext:346
Call

2012 Giben ICON 1  Panel Saw
$27,900

GIBEN ICON 1 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Overall cutting length, 151.4" (3,850 mm) pusher stroke; 3.2" (80 mm) max. saw blade projection, 12 HP (9 KW) main saw motor. -- Saw Carriage:Variable saw carriage speed from 0 - 525 FPM (0 - 160 MPM), return speed 525 FPM (160 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (6) pneumatic gripper clamps.Forward pusher speed 3.2 - 262 FPM (1 - 80 MPM), return speed 62 FPM (80 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Giben "G-Vision" + Windows "XP" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible.Giben "G-Vision" guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:(2) Independent automatic side/crosscut aligning device with 2.75" - 87" (70 - 2,200 mm) stroke. 90" (2,300 mm) Long crosscut fence (front-to-back);(1) Front mounted air floatation tables 20" x 78" (510 x 2,000 mm). & (3) Front mounted air floatation tables 20" x 60" (510 x 1,524 mm) -- Complete with: "Quick Change" saw blade system; "REMOTE" electronic scoring adjustment. -- Actual Model is GIBEN ICON 1

Bob Bullin
800-374-5009 ext:346
Call

2006 Giben SMART 75 SP  Panel Saw
$18,900

GIBEN SMART SP 75 CNC Front Load Panel Saw... Specifications: -- 149" (3,800 mm) Overall cutting length, 2.95" (75 mm) max. blade projection, 15 HP (11 kW) main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 164 FPM, return speed 164 FPM (40 MPM); powered by AC brushless motor with inverter. -- Programmable pusher fence with (7) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (0.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke.The SMART SP 75 is equipped with: -- "PC" Front end controller with: Windows "XP" operating system, Pentium 300 MHz processor, 64 MB RAM, 4.8Gb hard drive, floppy & CD drives, (2) RS 232 serial ports, MOELLER PLC, (1) PCI network slot. -- 15" SVGA color monitor, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (9) in-line nylon profile rail tracks; pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. Includes: -- Safety trip bar, safety flaps at cut-line, protection fence around rear of saw. -- (1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation table 49" x 20" (1,300 x 510 mm).

Jim Reedy
800-374-5009 ext:455
Call

1997 Giben PRISMATIC 2  Panel Saw
$15,900

GIBEN PRISMA 2 SP CNC Front-Load Panel Saw149" (3,800 mm) Overall cutting length, 4" (105 mm) max. cutting height.Specifications: -- 22 HP main and 3 HP scoring motor, 16-7/8" dia. - 3,800 RPM main & 8-1/2" dia. - 7,200 RPM scoring blade. -- Carriage cutting speed 16 - 328 FPM, 328 FPM constant return, AC Inverter drive; programmable pusher fence with rack & pinion drive system. -- (8) Material clamps (open up to 115 mm), pusher speed 3 - 197 FPM forward, return 197 FPM, DC Servo drive motor, 159" overall stroke of pusher fence.Equipped with: -- Roller module rear machine table with (13) rails; alternate pressure beam for final trim cut. -- Pneumatic side alignment w/automatic pre-positioning by G-Drive microprocessor, aligner stroke from 70 - 2,200 mm. Features: -- PC Front end with Windows + "G-Drive" operating system: -- 14" Color monitor, 386/AT PC, 20 MB HD, stores up to (1,000) programs, each with (99) cutting patterns and ea. pattern with up to (32) sizes. -- Membrane type keyboard for data entry, 3-1/2" floppy disk drive for data transfer, (2) RS-232 ports for downloading from the office and (1) for machine interface; -- Screen displays cutting patterns to scale and "real time" operation & saw function; KLOCKNER + MOELLER PLC, Programmable Logic Controller. Complete With: -- (3) Air floatation tables 51" x 20" & (1) air foltation table 78" x 20"; -- LED readout ammeter for main arbor motor; -- Automatic saw blade height adjustment; pneumatic saw blade "quick change" system; UL & CSA listed electrical components. Actual Model is Prisma 2 SP H.115.

Jim Reedy
800-374-5009 ext:455
Call

2005 Giben SMART 75 SP  Panel Saw
$25,900

GIBEN SMART 75 SP FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 129.9" (3,300 mm) Overall cutting length, 131.8" (3,350 mm) pusher stroke pull-back;2.95" (75 mm) Max. saw blade projection, 15 HP (11 KW) main saw motor 1.5 HP (1.1 kW) scoring saw motor. -- Saw Carriage:Variable saw carriage forward speed 16 - 164 FPM (5 - 50 MPM), return speed 197 FPM (60 MPM);Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (6) pneumatic gripper clamps, max clamp opening 2.56" (65 mm).Variable forward pusher speed 2.5 - 82 FPM (0.8 - 25 MPM), return speed 131 FPM (40 MPM);Pusher driven on round bar-ways by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Windows "XP" + "Pentium" processor operating system with multitasking & easy programming of very complex cutting patterns.15" CRT monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by adjustable key pad pendant, standard industrial keyboard & mouse & CD-ROM drive; direct downloading from office PC is possible."Moeller" PLC guarantees full management of all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself, and when necessary to the width of trim cut too. -- Rear of machine:(9) Rear support rails with 80 mm dia roller modules; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device with 2.4" - 48" (60 - 1,220 mm) stroke. 90" (2,300 mm) Long crosscut fence (front-to-back);(1) Front mounted air floatation table 20" x 78" (510 x 2,377 mm) & (3) Front mounted air floatation table 20" x 60" (510 x 1,524 mm). -- Complete with:G-Lock "Quick Change" saw blade system. -- Options Include:On board pattern planner software included -- Actual Model is GIBEN SMART 75 SP

Bob Bullin
800-374-5009 ext:346
Call

1998 Griggio L32  Panel Saw
Call for Price

weight is 2000lbs 10ft Slider/9 HP Model L32 Lock Table 3 Speeds Score and blade are electric Blades are self breaking Telescoping Cross-Cut Table Small table fence for small angular work

Carolina Machinery Sales, Inc
704-288-1904
Call

2003 Hendrick USA-50 SINUC  Panel Saw
$7,500

HENDRICK USA-50 SINUC CNC Cross Cut Panel Saw -- Equipped with: SINUC 3000 Cut Controller; Standard Cut Width: 53"; full 3" cut height for stacking material. -- 14" Main blade (3,500 RPM); 6" scoring blade (5,000 RPM); 10 HP TEFC main saw blade motor. -- Saw carriage traverse speeds are variable by inverter; uses unique dual THK linear rectangular ways for added rigidity and accuracy at the cut line. -- Complete with: Automatic Lubrication System on THK rail for pusher drive; full-length pneumatic hold-down bar for accuracy and increased dust collection efficiency. -- Includes: (2) Adjustable Flip Stops; (3) 4" ports for max. dust collection; safety shield; safety bar on both front and rear of the hold-down bar; E-Stop Button on each support table; push button for cycle start; saw cover with air cylinder lock with time delay; dual channel safety relay. -- PC Controller accepts 3rd party saw optimization and cut programs. -- Input Table: 174” x 54” x 51” w/ Fence; Output Table: 33 ½” x 94 ½” x 38”. -- Also includes: Spare guide rails new in crate ($ 15,000 value).

Jim Reedy
800-374-5009 ext:455
Call

1999 Hendrick PATRIOT SRP 3200  Panel Saw
$14,900

126" (3,200 mm) Cutting length & pull back cap.; 15 HP (11 kW) arbor motor for main & scoring saw; 4" saw blade projection, variable saw carriage travel speed from 0 - 130 FPM (0 - 40 MPM), return carriage speed of 130 FPM (40 MPM). -- Programmable pusher fence with (6) material grippers; 0 - 130 FPM (0 - 40 MPM) forward positioning speed, 130 FPM (40 MPM) return speed; pusher fence travels on rack & pinion drive system. -- PC Front-end machine control, Windows "XP Professional" Operating system & built-in processor with panel optimizer; storage cap. of (75) different programs, each with up to (25) lines (cut sizes) and repeatable (99) times. -- Equipped with: Automatic crosscut side alignment device; last cut pneumatic holddown pistons; (3) front air floatation tables.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved