Northfield For Sale

Black Brothers 22D glue spreader Max working width 50"Max working thickness 3" 1/2 Hp, 230/460 volt three phase drive motor Table passline height 40" 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers (Please note that the top doctor roller and top applicator roller is segmented) 11-3/4" long and 38" long top roller segments

48" wide Black Bros UV Curing Oven

Black Brothers 22-D-875-68 Top Only Glue Spreader with 68" working width, 8-3/4" dia. Smooth Neoprene applicator roller, 6-1/2" dia. neoprene doctor roll, top roll applicator only, upper elevator opening 0" - 4-1/2", REEVES variable feed drive 1.5 HP. -- Complete with: Electrical interlocks, and safety shutoff bars.

Black Brothers Top Only Glue Spreader with 56" working width capacity. -- 8 3/4" dia. Chrome applicator roll with Chrome doctor roll and flow is controlled by single hand wheel adjustment. -- 1-1/2 HP motor variable speed drive. -- Upper elevator opening 0" - 4-1/2" w/manual hand wheel adjustment. -- Includes: safety guards, electrical disconnect box and magnetic starter.

BLACK BROTHERS 22-D-650-32 Top & Bottom Adhesive Spreader; Top & Bottom Roll Glue Spreader with 32" capacity. -- 6-1/2" Rubber glue applicator rolls with 16 TPI Grooving, flow controlled by 4-1/2" Neoprene doctor rolls. -- Single speed feed drive motor - 88 FPM. -- Lower elevator opening 0" - 3-1/2". -- Complete with: Magnetic start and all guards and labels.

BLACK BROTHERS TOP and BOTTOM GLUE SPREADER with 74" working width, 8-3/4" dia. Neoprene coated application rollers and 6-1/4" dia. Neoprene coated doctor rolls. -- Upper elevator opening 0" - 4-1/2" -- 40 - 120 FPM Variable speed drive. -- Complete with: Push-button magnetic starter, safety reversing bar, safety guards and all warning labels.

BLACK BROTHERS 22-D-875-44 Top and Bottom Glue Spreader with 44" Working width.Specifications: -- 8-3/4" Dia. Neoprene coated application rolls with 16 TPI -- 6-1/2" dia. chromed steel doctor rolls. -- Upper elevator opening 0" - 4-1/2" with thickness adjustment. -- Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive, Nema 12 electronics.Complete with: -- Push button magnetic starter, safety guards, safety reversing bar for cleaning, and all warning labels.

BLACK BROTHERS “22-D 875-62"; TOP & BOTTOM GLUE SPREADER with 62"; working width. -- Upper elevator opening 0"; – 4";. -- 8-¾"; dia. Neoprene coated applicator rollers with 16 TPI Grooving. -- 6-½"; dia. Smooth Neoprene doctor rolls. -- 40 - 120 FPM Variable speed drive. -- Complete with: Push button magnetic starter, NEMA 12 electronics, safety guards, all warning labels.LITERATURE PHOTO - Not actual equipment offered, for reference only.

BLACK BROTHERS TOP AND BOTTOM 775- HOT MELT Glue Spreader with 32" working width.7-3/4" Heated Adhesive applicator rolls, with flow controlled by Chrome Doctor rolls. -- Single speed feed drive motor, operating at approximately 88 FPM. -- It has a 32″ width capacity and a 5-1/2″ thickness capacity. -- The doctor rolls are in very good condition. The price listed reflects that the 2 applicator rolls need to be re-covered. Or we can have them recovered for you for an extra cost and re-install. Please contact us with your specifications as we do not recover rolls until a machine is sold as these machines are very application specific. Meaning type of material which is usually silicone or a blend and durometer.This Model 775 has been cleaned and checked, and it heats up, and runs as it should.

BLACK BROTHERS 22D-875-62 Top & Bottom Glue SpreaderSpecifications: -- 62" Working width, 8-3/4" dia. Grooved Neoprene applicator roll with 24 TPI, 6-1/2" dia. smooth Neoprene doctor roll -- Lower elevator opening 0" - 4-1/2", -- Single speed of 88 FPM with 1.5 HP drive; -- NEMA 12 electrics. -- Complete with: Push button magnetic starter, safety guards, all warning labels.

Specification from owner 2007 Black Brothers 775-56” Top and Bottom Glue Spreader with an extra-large 12.5” opening designed for SIP (structural insulated panels) manufacturing. This machine is brand new and ready for immediate delivery. 575V, 3PH

BLUM - Mini Press: Hinge Borer -- Tabletop "Mini Drill" unit for BLUM Hinge Boring; 1.5 HP (1.1 kW) - 2,450 RPM drill head assembly for hinge cup boring. -- Head assembly rotates for several hinge & drawer system boring patterns; pneumatic drill cycle with air blow-off. -- Includes: 48" x 24" Tabletop. -- Machine also used for line boring by purchasing an auxiliary BLUM spindle head; not included. Complete with: 3-Drawer mobile storage base for all hinge components.

BMT B 700 Pin Router referbished in 2010

BOARKE (HOLZ-HER) - BKM-37RK2: 2-Head Wide Belt Sander37" Width cap. Drum & Combination Head.Head Configuration1st Head. Rubber-covered contact roll; 6-1/4" dia.; 20 HP motor.2nd Head. Combination head with: 6-1/4" Dia. rubber covered contact roll (50-Shore); 3-1/8" wide finishing platen; 15 HP motor.Specification -- Abrasive belt size: 37" x 75". -- Air tensioning & electronic abrasive belt tracking. -- Conveyor belt feed with: 2 HP Variable feed drive. -- 9 - 45 FPM Feed speed with inverter.Equipped with & Features: -- Infeed & outfeed rubber covered holddown rollers. -- 1/8" - 7" Max. motorized thickness opening. -- LED Readout thickness. -- Part "over-thickness" protection. -- Automatic conveyor belt tracking. -- Emergency stop button. -- Motor load meters. -- Magnetic controls.NOTE: Very clean machine; low hours: Only ran prototypes; replaced with 3-head machine for production.

BOARKE - BKM-43103RRK: (3) Head 42″ Wide Belt Sander (3 NEW Drums)43" Width cap.: Drum, drum, platen.Head Configuration1st Head: 30 HP; 10″ Helical grooved drum.2nd Head: 25 HP; 10″ Helical grooved drum.3rd Head: 20 HP; Helical grooved (idler) with a platen. Specifications -- 42″ Width capacity; 5″ height capacity running. -- 43″ X 103″ Abrasives. -- 1st Head: 30 HP; 10″ helical grooved drum. -- 2nd Head: 25 HP; 10″ helical grooved drum. -- 3rd Head: 20 HP Helical grooved (idler) with a platen. -- 1st & 2nd Heads: Dial indicators to dial in abrasives; has optional 5 HP vacuum feed bed.Equipped with & Features: -- Feed: Variable from 7 - 45 FPM via a 2 HP motor; VFD for speed control. -- Feed Mat: Thick; with usual crazing, but plenty of life. -- Elevation: Handled by a 1/2 HP motor. -- Machine includes: Digital readout; touchpad control combined with auto thickness calibration unit on the right.

Manufacturer’s Specification ( to be confirmed) - With its powerful 3 HP motor can delivers the performance professional demand. - Coupled with an industrial quality eccentric oscillation mechanism that delivers more efficient sanding, less tendency to burn and less belt loading. - Heavy duty spring system allows easy adjustment for the front aluminum table for full use of the abrasive surface. - Aluminum auxiliary contour table allow use of 4” idler roller as a drum sander. - 9” Dia. Drive drum, 4” Dia. Idler drum. - 9-1/2” x 48” cast iron platen with graphite pad. - Rugged bearing – assisted belt torsion devise.. - Aluminum table travels 8” and tilts – 5 to 45 degree. - Dual 4” dust ports. Belt speed: 4200 RPM - Sanding belt oscillate distance: 1/4” (6 mm) Motor5HP / 220V / 60Hz Belt Size230 x 3520mmn Frint Table Size (L x W)1210 x 300mm Dust Port 4”

Boarke 43" 2-Head Sander

37” Capacity single head 230 volt 3phase

50” width drum/drum/platen heads 480 volt 3-phase Bottom and top sanders can be sold separately Pictures coming for bottom sander

BOERE - TKS 900, ...2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; equipped with: (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic controlled, 114.7 kW (20 HP); Air blowing unit for cleaning the abrasive belt. -- All heads use abrasive belts size: 910 x 1,900 mm (35.8" x 74.8").Feed System -- Variable feed speed: From 5 - 25 MPM (16 - 82 FPM); 1.5 kW (2 HP) motor. -- Motorized part thickness opening: 3 - 150 mm (0.1" - 6"), driven by 0.12 kW (0,15 HP) motor.Complete with: -- Emergency Stop Systems for abrasive belt breakage and low belt tension. -- Infeed safety bar for operator protection and oversized parts. -- Automatic Star Delta starters, motor load meters. -- Pneumatic belt tension. -- Emergency Stops at the front & back. -- Extended infeed belt, approx. 42" long.Actual model: BOERE "TKS 900".