Woodworking Equipment For Sale

BINKS - COMET 3, ...Paint PumpMounted on a roll-around cart.

Infra Red heating unit designed to be used over a conveyor (not included). Currently set up to roll a shop cart under to assist us in some finishing processes. This is a two zone unit with an overall heating area of 56 sq ft. between the two infrared panels. Each section of infrared panels is 4'x7' allowing you an array of options to meet your needs. They do however, get controlled off the same control panel. --Unit has a mechanical percentage timer in control cabinet that is used to cycle power on and off as a means to control temperature. Controlling the distance from emitters to work surface is your other form of temperature control. The patented Black Body emitter consists of a serpentine configuration of NiChrome wire embedded in a refractory pad that is 12 inches square and approx.3/8" thick and coated with a high-emissivity black coating. -- Unit is complete and will need some retrofitting to meet your specific requirements.

BLACK BROTHERS 4010 Cold Press with Motorized OpeningEnd loading on 50" side, Platen dimensions: 50" x 122", single upper platen, motorized adjustable daylight opening of 4" - 55". -- Pneumatic pressure by (32) air pods in upper platen, producing 50 PSI specific pressure, max. air pod stroke 5-1/2"; -- Equipped with: Dual chain feed-thru system, with forward and reverse, for automated loading & unloading. 80 FPM fixed speed drive motor, air cylinders automatically raise and lower chain depending on the position of the Air Pods. NEMA 12 electrics and electrical power supply.

BLACK BROTHERS 775-56 Top and Bottom Glue Spreader with Extra Tall Opening for SIP PanelsDescription & Specifications:1. Top and Bottom glue spreader2. Upper elevator machine opening to 12 - 1/2" opening3. Pass line-height 30"4. Variable speed drive by inverter 40 - 120 fpm5. Electrical interlock on upper and lower Nip Guards6. Operating control bars7. NEMA 12 electrical enclosure 575 Volt, 3-phase power8. Coating rolls rubber 7 - 3/4" dia OD, 14 TPI with 1/2" Cross Hatch Grooving.9. Doctor rolls chrome 6 - 1/2" dia ODThis is a 2007 machine but has never been put into operation and is ready to go, it has 575 volts, you may need a transformer.

BLACK BROTHERS 22D-875-62 Top & Bottom Glue SpreaderSpecifications: -- 62" Working width, 8-3/4" dia. Grooved Neoprene applicator roll with 24 TPI, 6-1/2" dia. smooth Neoprene doctor roll -- Lower elevator opening 0" - 4-1/2", -- Single speed of 88 FPM with 1.5 HP drive; -- NEMA 12 electrics. -- Complete with: Push button magnetic starter, safety guards, all warning labels.

BLACK BROTHERS “22-D 875-62"; TOP & BOTTOM GLUE SPREADER with 62"; working width. -- Upper elevator opening 0"; – 4";. -- 8-¾"; dia. Neoprene coated applicator rollers with 16 TPI Grooving. -- 6-½"; dia. Smooth Neoprene doctor rolls. -- 40 - 120 FPM Variable speed drive. -- Complete with: Push button magnetic starter, NEMA 12 electronics, safety guards, all warning labels.LITERATURE PHOTO - Not actual equipment offered, for reference only.

Black Brothers 22-D-875-68 Top Only Glue Spreader with 68" working width, 8-3/4" dia. Smooth Neoprene applicator roller, 6-1/2" dia. neoprene doctor roll, top roll applicator only, upper elevator opening 0" - 4-1/2", REEVES variable feed drive 1.5 HP. -- Complete with: Electrical interlocks, and safety shutoff bars.

BLACK BROTHERS TOP and BOTTOM GLUE SPREADER with 74" working width, 8-3/4" dia. Neoprene coated application rollers and 6-1/4" dia. Neoprene coated doctor rolls. -- Upper elevator opening 0" - 4-1/2" -- 40 - 120 FPM Variable speed drive. -- Complete with: Push-button magnetic starter, safety reversing bar, safety guards and all warning labels.

BLACK BROTHERS 22-D-875-74, Wide Format (74") Top & Bottom Glue Spreader74" Working width, 8-3/4" dia. EPDM covered applicator rolls, 6-1/4" chrome plated doctor rolls, upper elevator opening 0" - 6". -- Single speed 1.5 HP drive for 88 FPM, NEMA 12 enclosures. -- Complete with: Push button magnetic starter, safety guards, and safety reversing bar.NOTE: Very Good overall condition, but rolls will need to be recovered, and Seller has discounted price to reflect this expense.

BLACK BROTHERS 22-D-875-74, Wide Format (74") Top & Bottom Glue Spreader74" Working width, 8-3/4" dia. grooved rubber covered applicator rolls, 6-1/4" chrome plated doctor rolls -- Complete with: Push button magnetic starter, safety guards, and safety reversing bar. -- Top elevator style glue spreader, constant pass line --Main Motor 1HP, 3ph --Feed speed 88FPM --Thickness adjustment via manual hand crank

BLACK BROTHERS 22-D-875-74, Wide Format (74") Top & Bottom Glue Spreader74" Working width, 8-3/4" dia. Grooved rubber covered applicator rolls, 6-1/4" hard rubber covered doctor rolls --Main motor 1.5hp -- Bottom roll adjustment -- Complete with: Push button magnetic starter, safety guards, and safety reversing bar.NOTE: Currently wired for 460v

BLACK BROTHERS - 22-D-875-56, ...Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls. -- Variable feed speed drive, pass line height 34". -- Drip Pan, Feed Pan, Continuous Flow Trough to be Stainless Steel or Teflon Coated. -- Trough for continuous flow 1" pneumatic pump and hose to supply product.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.

Black Brothers 22D glue spreader Max working width 50"Max working thickness 3" 1/2 Hp, 230/460 volt three phase drive motor Table passline height 40" 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers (Please note that the top doctor roller and top applicator roller is segmented) 11-3/4" long and 38" long top roller segments

BLACK BROTHERS - 22-D-875-32, ...Top Only Glue Spreader.Capacity 32" Working width. -- 8-3/4" Dia. Rubber roll -- 6-1/2" Dia. chromed steel doctor rolls. -- Top elevator opening w/Readout -- Constant pass line: 36-3/4" -- Outfeed roller conveyor -- 7.5 HP MotorComplete with:1 Spare rollerNOTE: Machine is currently wired for 220v

BLACK BROTHERS 22-D-875-44 Top and Bottom Glue Spreader with 44" Working width.Specifications: -- 8-3/4" Dia. Neoprene coated application rolls with 16 TPI -- 6-1/2" dia. chromed steel doctor rolls. -- Upper elevator opening 0" - 4-1/2" with thickness adjustment. -- Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive, Nema 12 electronics.Complete with: -- Push button magnetic starter, safety guards, safety reversing bar for cleaning, and all warning labels.

BLACK BROTHERS 1205 Air Pod Press Overall 146" x 62" platen dimension with (3) individual top platens, side loading on 146" side. -- Motorized vertical daylight up to 30" -- (3) Individual platen zone controls for up to 5’ x 12’ press area, (3) 4’ x 5’, pneumatic top pressure via (48) 5-1/2" stroke air pods producing a maximum 50 PSI specific pressure. -- Air-assisted pop-up rollers in bottom platen for loading-and-unloading, pass line height for loading is 29".

Complete BLACK BROTHERS COLD PRESS LAMINATING LINEWith BLACK BROTHERS APP PL 5 X 12, 50 PSI END LOADING FIXED AIR POD PRESSInfeed Scissor Lift, Panel Pusher, Panel Cleaning Brush, Glue Spreader, Stack-building Sissors-lift, Laminate Rack over conveyor, stack staging and press loading Conveyor, and Cold Press. -- Station 1: PNEUMATIC PANEL FEEDERPanel Pusher feeds individual panels from side loaded (w/forklift) scissor lift into panel cleaner. Photo electric eye activates arm that pushes panel into panel cleaner.Pusher arm: to feed panels into machine on demandSwitch: for remote mountingPass Line: 44"24" Stroke with 4' of adjustment: to feed panels from 1/211 thick, up to 250#, in lengths of 8', 10', or 12'Controls on (Left or Right)NEMA 12 Enclosure with main power disconnect switch and over-current protection: (230 or 460) Volt, 3 Phase, 60 Hertz, 24 VDC Control CircuitsDual Limit Switch Arrangement: to control the Scissors Lift with "hand/auto" selector and a Barrier Guard to prevent double board feed. -- Station 2:SCISSORS LIFT 36" Vertical Travel foot operated raise/lower switch48" X 120" Plain Deck with 6,000 Lbs CapacityInternal Pump 460 Volt, 3 Phase, 60 Hertz, 24VDC Control CircuitsPin Adjustable Edge Guides, mounted on SLAnchor Clips for mountingTransverse Conveyors with air brake to allow loading or unloading from side. -- Station 3:MIDWEST AUTOMATION PC160 Panel Cleaner with 63" Working width capacity, (2) spiral type cleaning brushes, 0" to 3" thickness opening, single end adjustment with roll opening (scale-type) indicator;Variable feed speed 30 - 150 FPM with 1 HP - 1,725 RPM drive, (2) 6" dia. infeed and (2) 6" dia. outfeed rolls, variable brush speed with 3 HP motor. Equipped with: All guards, dust hoods, and magnetic starter. -- Station 4:BLACK BROTHERS 775 TOP & BOTTOM ADHESIVE SPREADER, 68" Application: To apply water base adhesive to top and bottom Particle board, plywood and MDF substrateUpper Elevator: 0 to 4-1/2" OpeningRoll Opening Indicator: shows opening between rolls in .001 incrementsRiser Base: 44" pass line heightCaster Arrangement: (4) plain rigid casters with guide track and lockCoating Rolls: (2) 7-3/4" Maximum O.D., 60 Durometer - Neoprene/SPR, Grooved: 16 TPIDoctor Rolls: (2) 7" Maximum O.D., 100 Durometer - Ebonite, Ground Smooth Single Hand-wheel Doctor Roll Adjustment with mechanical digital read-out. Electrical Interlocks on nip-guard(s)NEMA 12 Enclosure with main power disconnect switch and over-current protection.1-1/2 HP Single Speed with 3" reverse Lockout 88FPMPivoting In-Feed TableOperating Hand-wheels & Controls: Parallel to direction of flow on right Motor On Left EndOperating Control BarsLiquid Level Control: FIBER OPTICMachine Mounted Double Diaphragm Pump: l" Ports, Aluminum body with Neoprene diaphragm Feed Lines:Automatic Roll Cleaning Arrangement -- Station 5:Hydraulic "Conveyo-Lift" with conveyor roller top; as board leaves the spreader, person on each corner guides the panel over the laminat

48" wide Black Bros UV Curing Oven

BLACK BROTHERS 22-D-1175-80 Glue Spreader (TOP & BOTTOM)Specifications: -- 80" Working width with 11-3/4" dia. Smooth EPDM coated rolls, 8-1/2" dia. EPDM coated doctor rolls. -- Upper elevator opening 0" - 4-1/2", 2 - 3 HP Variable speed drive, target feed speed of 20 FPM; Nema-12 electrics. -- Complete with: Push button magnetic starter, safety guards, and reversing bar.LITERATURE PHOTO - Not actual equipment offered, for reference only.

BLACK BROTHERS 22-D-650-32 Top & Bottom Adhesive Spreader; Top & Bottom Roll Glue Spreader with 32" capacity. -- 6-1/2" Rubber glue applicator rolls with 16 TPI Grooving, flow controlled by 4-1/2" Neoprene doctor rolls. -- Single speed feed drive motor - 88 FPM. -- Lower elevator opening 0" - 3-1/2". -- Complete with: Magnetic start and all guards and labels.