Leadermac Gang Rip Saw For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
3 Results Found
Sort By 
STANDARD LISTINGS
2019 Leadermac LMC-101-1600 HD 63"  Gang Rip Saw

LEADERMAC MODEL LMC 1600M - 63” GANG RIPSAWS -- SPECIFICATIONS: -- Working width: 0.6” – 51” or 63” -- Working thickness: 0.4” – 4” thick -- Up & down motor for pressure head: 1 HP -- Feed motor: 7-1/2 HP with VFD -- Saw spindle: 100 HP. Options for larger motor -- Saw spindle diameter: 80 mm (3.15”) double keyed -- Spindle speed: 4,000 RPM --Saw blade diameter: Up to 14” blades for 4” depth of cut --Feed speed, infinitely variable: 20 – 50 FPM (to 100 or 200 FPM optional) -- STANDARD FEATURES: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with Hydro-Loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision saw setting & changing -- NOTE: A customer who owns a LMC 1600 HD Rip Saw reports that it takes them 7-minutes to completely change out an arbor i.e. taking out the dull saw arbor and replacing with a sharp saw arbor -- Hardened & hard chromed infeed table -- (7) Top power driven rolls – full width -- (5) Bottom power driven rolls – full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are all driven by Cardan shaft drive with HD gearboxes, interconnected -- Feed Roll Arrangement: 1st top & 1st bottom powered rolls followed with (2) full width rows of anti-kickback finger units and then the remainder of powered top & bottom feed rolls -- 7-1/2 HP HD VFD, infinitely variable feed system -- Main motor has Wye-Delta low amperage soft start -- Electrics are 230, 456 or 575-volt, 3-phase, 60-cycle with all controls to CSA/UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box (electronic version on request) -- (4) Top & (4) bottom 6” dust hoods included -- Saws, dado heads, cutterheads, and spacers optional extra -- PRICE: -- LMC-1600M-63” Wide x 4” Thick Rip Saw complete, $ 148,950.00 -- OPTIONS INCLUDED IN PRICE: -- 100 HP saw spindle motor -- Moveable main electrical panel with 10’ of main cable -- 4” thickness capacity using 14” blades -- Hanging control panel in lieu of control std. as shown in machine photo -- Increased feed speed to 200 FPM for 2” thick or to 100 FPM for 4” thick material. Includes heavier gearboxes and drive components, in lieu of standard 50 FPM and 7-1/2 HP VFD -- AVAILABLE OPTIONS WHEN ORDERING A NEW MACHINE: -- Variable frequency drive brakes -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 51” wide machine, add $ 17,250.00 -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 63” wide machine, add, $19,275

Jeff Terrill
800-374-5009 ext:349
Call

2019 Leadermac LMC-101-1300MM-51"  Gang Rip Saw

LEADERMAC MODEL LMC-1300M – 51” & LMC 1600M - 63” GANG RIPSAWS Specifications: -- Working width: 0.6” – 51” or 63” -- Working thickness: 0.4” – 4” thick -- Up & down motor for pressure head: 1 HP -- Feed motor: 7-1/2 HP with VFD -- Saw spindle: 100 HP - Options for larger motor -- Saw spindle diameter: 80 mm (3.15”) double keyed -- Spindle speed: 4,000 RPM -- Saw blade diameter: Up to 14” blades for 4” depth of cut -- Feed speed, infinitely variable: 20 – 50 FPM (to 100 or 200 FPM optional)Standard Features: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with Hydro-Loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision saw setting & changing -- Hardened & hard chromed infeed table -- (7) Top power driven rolls – full width -- (5) Bottom power driven rolls – full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are all driven by Cardan shaft drive with HD gearboxes, interconnected -- Feed Roll Arrangement: 1st top & 1st bottom powered rolls followed with (2) full width rows of anti-kickback finger units and then the remainder of powered top & bottom feed rolls -- 7.5 HP HD VFD, infinitely variable feed system -- Main motor has Wye-Delta low amperage soft start -- Electrics are 230, 460 or 575-Volt, 3-Phase, 60-Cycle with all controls to CSA/UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box (electronic version on request) -- (4) Top & (4) bottom 6” dust hoods included -- Saws, dado heads, cutterheads, and spacers are optional not incl. in pricePRICE: LMC-1300M-51” Wide x 4” Thick Gang Rip Saw, complete, ...$132,850Options included in Price: -- 100 HP saw spindle motor -- Moveable main electrical panel with 10’ of main cable -- 4” Thickness capacity using 14” blades -- Hanging control panel in lieu of control std. as shown in machine photo -- Increased feed speed to 200 FPM for 2” thick or to 100 FPM for 4” thick material. Includes heavier gearboxes and drive components, in lieu of standard 50 FPM and 7.5 HP VFD.AVAILABLE OPTIONS WHEN ORDERING A NEW MACHINE: -- Variable frequency drive brakes -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 51” wide machine, add ...$17,250 -- Complete spare spindle assembly, including outboard supports, to allow the presetting of extra -- Cutting package for quicker changeover for 63” wide machine, add ...$19,275 -- 125 HP saw spindle motor -- 150 HP saw spindle motor -- Rear fence adjustment from the front of the machine with digital position readout -- Saw spacers for

Jeff Terrill
800-374-5009 ext:349
Call

2019 Leadermac LMC-900M  Gang Rip Saw

LEADERMAC MODEL LMC-900M 36” WIDE HEAVY DUTY ROLL FEED RIPSAW COMPLETE: -- Specifications: -- Working width: .6” – 36” -- Working thickness: .4” – 2”. Optional to 4” -- Up & down motor: 1 HP -- Feed motor: 7.5 HP with VFD -- Spindle HP: 75 HP - larger on request -- Spindle diameter: 80 mm (3.15”) double keyed -- Spindle RPM: std. 4,000 RPM. Optional to 5,000 RPM with 10” blades -- Saw blade diameter 10” (250mm) std. Optional to 14”( 350 mm) diameter -- Feed speed, infinitely variable: 20 – 50 FPM. Optional to 100 or 200 FPM -- Standard features: -- Extra heavy stress relieved main frame -- Sound & safety enclosure included with internal strobe-free lighting -- High precision spindle - double keyed assembly with hydro-loc outboard bearing assembly on outboard side -- Entire spindle assembly slides out on support for quick, easy and precision sawblade setting & changing -- NOTE: A customer who owns a LMC 1600 HD rip saw confirmed that it only takes 7-minutes to completely change out an arbor i.e. Taking out the dull saw arbor and replacing it with a sharp saw arbor -- Hardened & hard chromed feed tables -- (7) Sets of full width top power driven rolls full width -- (5) Sets of full width bottom power driven rolls, full width -- Infinitely variable pneumatic pressure to top feed rolls -- Top & bottom feed rolls are driven by cardan shaft drive with hd gearboxes interconnected -- 1st Top & 1st bottom powered roll combination and then (2) rows anti kick back finger units. Fingers are full width and then to the rest of the powered top & bottom rolls which provide the best feeding capability with good safety features -- HD VFD, 7-1/2 HP infinitely variable feed system -- Main motor has wye-delta low amperage soft start -- Electrics are 230, 450 or 575 volts 3/60 with all controls to CSA & UL specifications -- Documentation: maintenance manual, operation manual, electrical diagrams, parts list & tool box -- (4) Top & (4) bottom 6” (150mm) dust hoods included -- Tool box -- Saws, dado heads and/or cutterhead(s) and spacers optional extra -- Options Include: -- Hanging control panel in lieu of control std. Setup as shown in the machine photo (value $890) -- Moveable main electrical panel with 10 ft. (3m) of main cable (value $ 645) -- Amp meter for the arbor motor -- Available Options: -- To 3” thickness capacity using 12” dia. Blades, p.o.r. -- 3” or 4” thickness capacity – using 14” dia. Blades..$ p.o.r. -- To 100 FPM top feed speed – infinitely variable to 4” thickness -- 200 FPM top feed speed – infinitely variable to 2” max. Thickness -- 100 HP saw spindle motor -- 125 HP saw spindle motor -- 150 HP saw spindle motor -- Front and/or rear side head (10 HP-std) in front of the saw arbor (please discuss if interested in this) -- 15 HP or 20 HP side head motor(s) in lieu of 10 HP -- Adjustment of the rear gu

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved