Woodworking Equipment For Sale
1450 Results Found
100% Pneumatic operation Clamp Carrier with (6) sections and 40" wide x 10-1/2' long gluing capacity. -- (8) 40" opening x 3-1/2" high jaw clamps per section (48 clamps total). Includes Heavy Duty Air Motor Drive for machine rotation, Swing Style Tightener & Flattener , and Lever Valve Activation for Forward and Reverse Rotation. -- The Taylor 6 Clamping System is a reliable and versatile woodworking clamping system for edge gluing & laminating that offers a rugged, heavy duty design to handle any custom job. -- NOTES: -- 3 Year Warranty! -- Made in the U.S.A!! -- Typical shipment in 8-weeks from receipt of deposit -- Machine footprint is 14' long x 10' wide x 10' high.
TAYLOR 40-SECTION Pneumatic Clamp Carrier;8' Width cap., (182) clamps total with (4 to 5) clamps on every section, 32" max. clamp opening with 2-1/2" high jaws. Complete with: -- Pneumatic Clamp Tightener -- Pneumatic Flattener -- Air Rotation.Note: Already torn down and ready to ship
Call for Price
Model 800147 Includes: Glue Spreader with 84" Infeed and Outfeed 40 Section (8) Clamps per section 3-1/2" Jaws Automatic Panel Flatener This system is still under power and available for inspection.
TAYLOR 6 Section Pneumatic Clamp Carrier -- 6-Section x 8-1/2' width cap.; -- (6) clamps per section (36 clamps total), 32" opening on clamps, 2-1/2" high jaws. -- With pneumatic rotation, heavy duty tightening, and panel flattening.Note: tear down not included in the price
TAYLOR 20 Section Automatic Clamp Carrier • 8.5' Width cap., (9) clamps per section (180 clamps total).• 32" Max. clamp opening (180) clamps with 2-1/2" jaw heightComplete with: ● Torque wrench clamp tightening, pneumatic panel flattener and air drive carrier rotation. ● Actual model: 800171 ● Actual overall dimension is 11’L x 13’W x 7’H.Already tear down and ready to ship!
TECHNO HD 60120 CNC Router with ATC:60" X 120" CNC Router in front to back configuration with a 4-zone T-slot phenolic vacuum table. -- Axis travel:X-Axis 62", Y-Axis Travel 120" and Z-Axis travel is 9" with 7.5" clearance; -- Drive System:Rack-n-Pinion on X-, Y-, with ball screw and on Z-axis with antibacklash ball nuts. Drive System is stepper motor controlled with up to 800 IPM travel. Repeatability: +/-.003 inches. -- Spindle:(1) 12 HP "ATC" type spindle with a rear mount 8 position tool rack, fully programmable speeds from 6,000 to 18,000 RPM. Includes Vacuum Hood, collet wrenches, ER25 collets, and cover nut. -- Control System:Micro stepper controller with brushless motors and easy to use hand held control pendant, compatible for G & M code Drive system. -- Includes;(1) 8.9 HP "BECKER" VTLF 2.250 vacuum pump, assorted tool holders, manuals and documentation.
TECHNO HD 4896 4 X 8 router with single spindle:48" X 96" CNC Router in front to back configuration with a 4-zone T-slot phenolic vacuum table. Axis travel of X-Axis 48", Y-Axis Travel 96" and Z-Axis travel is 9" with 7.5" clearance; distance between uprights 57". -- Drive System:Rack-n-Pinion on X-, Y-, with ball screw and on Z-axis with antibacklash ball nuts. Drive System is stepper motor controlled with up to 800 IPM travel. Repeatability: +/-.003 inches. -- Spindle:(1) 4 HP "HSD" wrench type spindle, fully programmable speeds from 6,000 to 18,000 RPM. Includes Vacuum Hood, collet wrenches, 1/8",1/4", 3/8", and 1/2" ER25 collets, and cover nut. -- Control System:Micro stepper controller with brushless motors and easy to use hand held control pendant, compatible for G & M code Drive system. -- Includes; (1) 10 HP vacuum pump and documentation. -- Machine floor space 78" W, 119" L, 60" H at 2,500 Lbs.
TECNOMA XT 504RRS Single Sided Edgebander -- Max edge capacity: 0.4 mm to 3 mm in coil and 7 mm (0.275") in strip, 1-1/2" (40 mm) max. banding height, 2-3/8" (60 mm) min. panel width, and 5-1/2" (140 mm) min. length. Equipped with: -- Automatic coil feed magazine with semi-automatic feed for strips, Teflon coated glue pot (Heat-up time 8 min), Heavy Duty 3 mm PVC capacity guillotine. -- 2-Roll pressure section w/1st roller power driven via clutch with pneumatic in & out positioning, 2nd roller idler roller. -- Workstations: Double motor front & rear end trim (0.41 HP - 12,000 RPM motor ea.), tilts 0ø - 15ø; end trimmer mounted on 45ø THK guides. -- Top & bottom rough trims (0.66 HP - 12,000 RPM motor ea.) equipped with "Quick Release" electric connectors for easy swap-out of trim motors/tooling. -- Top & bottom flush trims (0.46 HP - 12,000 RPM motor ea.) equipped with "Quick Release" electric connectors for easy swap-out of trim motors/tooling. -- Top & bottom PVC/ABS scraper for up to 3 mm radius. -- Top & bottom buffing unit (0.2 HP - 2,750 RPM motor ea.), both adjustable. -- Single 7 MPM (26 FPM) fixed feed speed, 0.8 HP feed drive. Complete with: -- Sound-proof enclosure,
TEGLE & SONNER Shaper with Power Feeder -- This machine is a tank of a shaper with a 7.5 HP motor, we have gone through the machine and replaced the bearings on it. -- This machine features a foot brake for the main spindle, the spindle size is 1 inch with 5.5" under the nut. -- Includes: HOLZ-HER power feeder which we have also gone through, and replaced the bearings in as well. and replaced the chain and lubed. -- This machine is scheduled to have the table reground and then be repainted, the asking price will go up after that. Originally built in Norway.
THERMWOOD C 53 with Roller Holddown and Off Load:5' x 10' Fixed table, moving gantry in a front-to-back configuration with a structural composite table fly-cut to provide a precision work surface, roller-hold down for stack cutting and securing parts without vacuum; included is an auto-load system, and 5' X 10' off-load table. -- Equipped with:(1) 10 HP THERMWOOD Extended duty motors, fixed speed at 15,000 RPM. -- High performance closed loop brushless AC Servo SIEMENS drive system with feed speed to up 900 IPM, Z-axis stroke allows 10-1/2" of clearance and 6" vertical motion stroke on Heavy Duty slide carriage. -- Control:THERMWOOD "91000 Super" Controller with: 3-Axis control, Windows 7 operating system, 14" Color monitor, 128 GB hard drive, 3-1/2" floppy disk drive, CD-ROM drive, 85-key/101-emulation Qwerty keyboard for data entry, and RS-232 serial port. -- Comes complete with:10 HP vacuum pump Spindle wrenches, collets, covernuts, original documentation, manuals, and applicable software media.
Call for Price
THERMWOOD C40 CNC Router with ATC upgrade and Vacuum Pumps.5' x 8' Moving table machine in a front-to-back configuration with a single zone vacuum plenum, and manual material stops around the table perimeter. -- Equipped with: (1) 10 HP HSD BT-30 Type, push button (see below upgrade), quick change routing spindle, variable spindle speed from 3,000 - 24,000 RPM. -- Features: High performance closed loop SEIMENS AC Servo motors driving precision ball screws on all axes with feed speeds up to 1,200 IPM on the X- & Y-axis and 600 IPM on the Z-axis; way & ball screw bearings serviced by an automatic lubrication system. -- Controller: THERMWOOD "91000" PC Based, OS2 Control, 3-axis simultaneous motion, hand held programmer with pulse generator, 14" color monitor, 20.4 GB hard drive, CD ROM drive, 3-1/2" floppy disk drive, 85-key/101-emulation Qwerty keyboard for data entry, network card, and RS-232 port for PC communications, feed rate & spindle speed override; mounted in an air conditioned Nema rated control cabinet. -- Comes complete with: (2) 7.5 HP vacuum pumps and (1) 10 HP vacuum pump (total of 25 HP of vacuum producers), assorted tooling, and original documentation and manuals. Retrofit/Upgrade: In 2007 this machine was upgraded by THERMWOOD at their premises, with a 5-position tool rack for automatic tool changing, and upgraded to THERMWOOD'S latest 9100 Control System WINDOWS based for E-Cabinet use. This software is free to use (upon registration), powerful and user friendly.Additional Work: Approx $30,000 of total work in 2007, by THERMWOOD, also included: New Z-axis assembly, replaced trackway, lead screw bearings and ballnuts, and linear axis leadscrew compensation.
WEING U 23 E/005 "STANDARD" Feed Through Moulder; (6) Heads, (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 15 HP, right & left by 20 HP, top 20 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 1-13/16 with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed motor 10 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump. -- SALE INCLUDES (1) set of spiral and (1) SET corrugated heads, a dust manifold, spare feed rolls, extra parts, and a bunch of knives. ALSO AVAILABLE: -- Weinig model 960 Grinder, sells new for approx. $35,000... Add $12,500 if purchased with the Moulder -- CNC Template Maker, with scanner and DXF file capabilities, sells new for approx. $12,000... Add $3,500 if purchased with the Moulder. --
Call for Price
19082 Weinig U22A 7-Head Moulder Also available: R935 Grinder This machine is used on a daily basis and works good. The seller is putting in a new system.
Call for Price
Motors: Bottom 10HP, Right/Left 10HP, Top 15HP, Bottom 10HP motors w/mechanical brakes Electronic LED readouts for all tool holder settings, including chipbreakers & pressure elements. Powercom Plus software. Shipping footprint: 12x7x7 Weinig Unimat 500/017 Through Feed Moulder in good condition!
Call for Price
Weinig 6-Head moulder (bottom, right, left, right, top and bottom) Includes Dust tree and an assortment of heads and parts 1983 year of manufacture Model U-22-A Weinig Rondamat R-935 Grinder Semi-Automatic Grinding Machine for template & profile making Also used for straight knife grinding in cutterblock Automatic dividing according to number of knives Automatic linear movement for straight knife grinding 1991 year of manufacture
Call for Price
WEINIG PROFIMAT 23E Feed Through Moulder, "SELECT " Edition: 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16". -- Head sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia.1-1/2" with cutterhead speed of 6,000 RPM; digi-set readouts for left and top spindles. Mechanical digital readouts other spindles including chipbreaker and pressure element. -- Feed System: Feed motor 4 HP, variable speed of 20 - 78 FPM. -- Infeed straightening 2 M (6'6") table, side pressure roller mounted to infeed table. -- Features: Central lubrication system, table inserts for right/left vertical spindles and manual Waxilit pump. Full sound and safety enclosure, operator/spare parts manuals.
WEINIG U17A Feed Through Moulder with Hopper Feed; 7-Head7-Head (B-R-L-R-T-B-U), working capacity 6-3/4” x 4-3/4”.Head sequence: -- Bottom 5 HP (4 kW), 1st Right Side 5 HP (4 kW), Left Side 10 HP (7.5 kW), 2nd Right Side 7 HP (5.5 kW),Top 10 HP (7.5 kW), Bottom 7 HP (5.5 kW), Universal 5 HP (4 kW) motor.Spindles: -- (7) Spindles, all 1-1/2" dia. with cutterhead speed of 6,000 RPMFeed Drive: -- 5 HP (4 kW); variable speed from 18 to 118 FPM; Cardan (chainless) Feed drive. -- Motorized raise-and-lower of overhead feed beam: Lift unit motor 0.5 HP (0.37 kW). -- Air loaded feed rollers.Equipped with: -- 78” Infeed table with manual table lubrication pump. -- Device for processing short pieces. -- N° 15 Cutter-heads for planning. -- Spacer rings for shafts. -- Machine comes with cutterheads, wheels and accessories. -- Electric: The machine is dual voltage 230/460, currently plugged in at 460 V.Approx. Dimensions: Length - 190”, Width - 62”, Height - 60”; Weight 10,000 Lbs.Note: No manuals. Seller has a fork lift on site to help load. Machine is in guaranteed working order. Seller just replaced (2) bearings that had gone bad.
WEINIG UNIMAT GOLD, ...Feed Through Moulder. 6-Head (B-R-L-T-T-B), working cap. 9 1/16" x 4-3/4".Head sequence: -- Bottom 10 HP, right 10 HP, left 15 HP, top 15 HP, top 10 HP, and bottom 20 HP motor. Mechanical brakes on all motors. -- Spindle Dia.: 40 mm With cutterhead speed of 6,000 RPM. Mechanical digital readouts on all spindles, DigiSet readouts on left & top spindle, mechanical readouts on chipbreaker & pressure element of to spindles. -- Feed: Inverter controlled feed speed from 16 - 78 FPM, 5.5 HP feed drive. (1) Powered table roller in machine bed at out feed, (1) non-powered between top spindles. -- Tables: Infeed 2 M (6-1/2') with side pressure roller and manual pump for table lubrication. Chromed tables and fences. -- Includes: Setup tools and manuals . Note: Several cutter heads available at additional cost
Weinig H 22 B jointed moulder 9-Head, 8-5/8" x 4-11/16" cap. --Head sequence: bottom 20 HP, right 15 HP, left 15 HP, right 20 HP, left 20 HP, top 30 HP, top 40 HP, bottom 40 HP, universal 15 HP; profile knife jointers on spindles 4,5,6,7,8; straight knife jointers on spindles 1,2,3,6,7,8. -- Full 220 mm width jointing on horizontal spindles, all spindles 46 mm/ 1 13/16 in. dia. @ 6,000 RPM, outboard bearings on horizontal spindles, spindle brakes on all heads, limit switch locking of outboard bearings on 6th & 7th heads. 25 HP hydraulic feed unit 25 - 250 FPM, reduced distance between feed rolls, receding chip breakers on both top heads, pneumatic holddown on 1st top head, table plate w/ wooden insert on both top heads, automatic Waxilit pump. --Comes with many spare parts,
WEINIG PROFIMAT 23 ATS Feed Through Moulder; ...Low hours -- (1) Owner.5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle sequence: Bottom 10 HP motor, right & left by 15 HP motor, top 15 HP and bottom 10 HP motor. -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. Mechanical digital readouts. -- WEINIG " ATS" (99) program with positioning of left and top spindle. Mechanical digital readouts for chipbreaker and pressure elemnt at top spindle. -- Variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip-breaker at top spindles. Side pressure opposite right spindle, spring loaded with (2) rollers; driven outfeed roller in bed. -- Infeed straightening table 2 M (6'6"), full sound enclosure with mechanical interlock, side pressure roller mounted to infeed table, central lubrication system and manual table lubrication pump.