Glue Equipment For Sale

Taylor/JLT 79-X-4M Door Clamp Taylor/JLT 4 Section rotary Door Clamp for mitered or regular doors. 120 Volt 10 Amp - Power Button Rotation with Electric Motor Drive, 110 V single phase for all applications - Air Clamping with individual regulator controls for maximum versatility - Approximately 36” X 96” Capacity with adjustability for smaller sizes

Miter Door Pro 5 Rotary Clamp Model 79x-5-LM 5-section 38” x 96” capacity per section (2) Horizontal and (2) Vertical clamps per section heavy duty diaphragm pneumatic cylinders per clamp counter clockwise rotation 1 HP motor for rotation 115 volt

UNIMAK 160-S 5-Foot Wide Single-Sided Hot Melt Glue Spreader for Hot Melt Glue including PURHot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, particleboard, door spar, XPS, and polystyrene sandwich panels. All kinds of panels that adhesive application is required.Glue Types: Polyurethane hot melt (PUR) glue. Unfilled EVA,Pressure Sensitive Foil Types: As roll: PVC, P.P., finish foils and CPL foils As sheet Stock: Veneer, PVC, laminate, acrylic plates and door surfacesWorking Speed: 5 - 25 meter/Min (16.4 - 82 FPM)Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F) - chromed roller. -- Working Width: 200 - 1,600 mm (7-7/8" - 63"). -- Board Thickness: 4 - 40 mm (1/8" - 1-5/8"). -- Upper Spreader Roller, Silicone Coated and Ø 240 MM (9-1/2"). -- Upper Dosing Roller: Ø 215 MM – Chromed (8-1/2"). -- Lower Transport Roller: Ø 240 MM – Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately.

UNIMAK GS140-S Single Sided Hot Melt Glue Laminator4-Foot Wide Hot Melt Glue Spreader for PUR and other Hot Melt Adhesives. Panel Types: MDF, Particleboard, door spar, XPS and Polystyrene sandwich panels. All kinds of panels where adhesive application is required.Glue Types: Polyurethane Hotmelt (PUR) glue. Unfilled EVA.Pressure Sensitive Foil Types: As roll material - PVC, P.P., finish foils and CPL foils. As sheet Stock - Veneer, PVC, laminate, acrylic sheets and door surfaces. Working Speed : 5 - 25 m/Min (16.4 - 82 FPM).Technical Specifications: -- Max. External Working Temperature: 180 ° C (365° F), Chromed Roller. -- Working Width: 200 - 1,400 mm (7-7/8" - 55"). -- Board Thickness: 4 - 210 mm (1/8" - 2-1/4"). -- Upper Spreader Roller - 240 mm (9-1/2") diameter, Silicone Coated. -- Upper Dosing Roller: 215 mm (8-1/2") dia., Chromed. -- Lower Transport Roller: 240 mm (9-1/2") diam., Silicone coated. -- Total Power: 15 kWMelter and Hose are not Included, they are optional and can be quoted separately or purchased locally.

1) 10' long Dual Lane Infeed Conveyor 2) Graco Therm-O-Flow 200 55 Gallon Drum Unloader 3) Union Series #5, Model A, 14" Hot Melt Roller Coater 4) Union Dual Lane Lay-Up Conveyor 5) Union Series #5, 14" Five (5) Nip Rotary Laminator 6) 10' long Dual Lane outfeed Conveyor

VALCOM MELTON - EDRUM-H-Series: Drum Unloader200 L Drum Unloader: Designed to apply any type of adhesive delivered in 200-liter drums.EDrum Series Unloaders: Extremely versatile & includes several customizable options that adapt to each User's specific requirements. -- Features. Safer working environment with: Optional platen protection system & vent hood. Reduced downtime related to drum changes with: "New Drum Fastening System." Customizable to specific user's needs. Integrated grammage dosing control. TEFLON encapsulated seals. -- Technical Specifications "System 200L" Flat Platen or "200L" Finned Platen. Drum capacity: 200 Liters. Melting capacity flat platen system: 60 kG/Hr. Melting capacity finned platen: 130 kG/Hr. Max. number of pumps: (2). Working temperature: 30° - 240° C (86° - 464° F). Max. working viscosity: 100,000 CPS. Max. working pressure: 100 Bar. Electrical consumption: 24 kW.Selection of accessories to integrate & fit the Bulk Melter to your existing equipment, including: RTD Hot Melt Hoses. Slot Die applicators. Edgebander PUR retrofit Slot Die kits. Manual & Automatic dispensing valves. Mounting bracket packages. Solid-State Pattern Control Systems. Inline Filters. Replacement parts for competitive systems."Near brand New" Hot Melt Adhesive Melter can be adapted to your existing equipment. - Only used on (4) drums!

Brand New Hot Melt Adhesive Melter that can be adapted to your existing equipment.The 200 L Drum Unloader is designed for the application of any type of adhesive delivered in 200-liter drums, the EDrum Series Unloaders are extremely versatile and include several customizable options that adapt to each user's specific requirements.Features: Safer working environment with optional platen protection system and vent hood. Reduced downtime related to drum changes with new drum fastening system. Customizable to specific users needs Integrated grammage dosing control. Teflon encapsulated seals.Technical Specifications: System 200L flat platen or 200L finned platen Drum capacity 200 liters Melting capacity flat platen system 60 Kg/Hr Melting capacity finned platen 130 Kg/Hr Max. number of pumps is two (2) Working temperature 30 - 240° C (86 - 464° F) Max. working viscosity 100,000 CPS Max. working pressure 100 Bar Electrical consumption 24 kWWe can also supply a selection of accessories to integrate & fit the Bulk Melter to your existing equipment, including: RTD hot melt hoses Slot Die applicators Edge Bander PUR retrofit Slot Die kits Manual and Automatic dispensing valves Mounting bracket packages Solid State Pattern Control Systems In-Line Filters Replacement parts for competitive systemsHose sizes will vary depending on your application; please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core 12' long - #6 core 16' long - #6 core 8' long - #8 core 12' long - #8 core 16' long - #8 core 8' long - #12 core 12' long - #12 core 16' long - #12 core Delivery from date of order approximately 10 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

PUR Adhesive MelterValco Meltons IsoMelt Series has been specifically designed to process reactive hot melts such as PUR. Fast and easy changes to EVA or APAO with out adhesive degradation are no problem. The tank can accommodate 2 PUR standard bags, so that IsoMelt units can work with up to 40 liters of adhesive and meet the high production requirements of the woodworking, PVC and aluminum industries.These units are an ideal solution for profile wrapping, edge-banding and post forming. Easy removal of adhesive residue permits switching between PUR and other types of adhesive giving you the flexibility you need.Some Features : Air-Tight tank opening and blowing system Faster and safer cleaning due to its tilt-able tank and removable melting grid. Dry air blanket prevents moisture from reaching the adhesive Integrated grammage control accessible through a muti-function controller that simplifies operator programming. Apply the coating weight PreciselyEquipment Specifications: Tank capacity 40 liters Melting capacity 35 Kg/h Max.pumping capacity per pump 48 Kg/h Number of pumps two (2) Working temperature 30°c - 230°c (86°f - 446°f) Max. Working viscosity 100,000 cps Max. working hydraulic pressure 100 bar Max. Electrical consumption 6,200 W Adhesive types PUR / EVA / APAOWe can also supply all of your need's for accessories to make the Fit Up to your existing equipment including: RTD hot melt hoses Slot die applicators Edge Bander PUR retrofit slot die kits Manual and automatic dispensing valves Mounting bracket packages Solid state pattern control systems In-Line filters Replacement parts for competitive systemsSince Hose sizes will vary depending on your application please speak with our sales representatives regarding that, below are a few Options: 8' long - #6 core $461.00 12' long - #6 core $646.00 16' long - #6 core $750.00 8' long - #8 core $748.00 12' long - #8 core $957.00 16' long - #8 core $1,065 8' long - #12 core $835.00 12' long - #12 core $916.00 16' long - #12 core $1,158.00Delivery from date of order approximately 8 WeeksAll parts and service are based in the USA out of Cincinnati Ohio.

VITAP BLITZ CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, This Flexible machine is IDEAL for JIT or high production runs. -- Working Area:Useable working area "X" axis 36.2" (920 mm), "Y" axis 3.14" (80 mm), "Z" axis up to 1.57" (40 mm) material thickness with digital readouts -- BG & D Unit(1) 1 HP - 6,000 RPM horizontal drill motor; 0.47" (12 mm) Maximum drill bit dia. (1) Glue injector & (1) dowel Inserter with 1.57" (40 mm) Max. dowel lengthMachine is capable of processing dowel diameters from 6 mm dia x 25 mm long - 10 mm dia x 40 mm long dowels (currently setup for 8 mm dia dowels); -- Operator & Machine Control:CNC "Color Touch-Screen" Controller for function & simple part programming and program storage. -- Complete with: (1) 12" Dia. vibratory feed hopper, totally sealed electronically metered glue system with "Automatic" injector flushing; (1) 4.75 G (18 L) Glue tank & (1) 2.37 G (9 L) water tank;(4) Inclined vertical pneumatic hold-down clamps; Function selector control for boring only or doweling; Anti-slip table surface, Rack & pinion drive and centralized dust collection manifold.

VITAP - BLITZ: CNC Bore, Glue & Dowel Inserter -- Specifications(1) CNC Controlled head assembly with: Rapid (side-to-side) traverse; assembly with boring, gluing & insertion unit This "flexible" machine is IDEAL for JIT or high production runs. -- Working AreaUsable working area: "X" Axis 36.2" (920 mm); "Y" axis 3.14" (80 mm); "Z" axis up to 1.57" (40 mm) material thickness with digital readouts. -- BGD Unit(1) 1 HP - 6,000 RPM Horizontal drill motor; 0.47" (12 mm) max. drill bit dia.; (1) glue injector & (1) dowel Inserter with: 1.57" (40 mm) Max. dowel length.Machine capable of processing dowel diameters from: 6 mm Dia. x 25 mm long - 10 mm dia. x 40 mm long dowels (currently setup for 8 mm dia. dowels). -- Operator InterfaceCNC "Color Touchscreen" Controller for: Function & simple part programming and program storage. -- Complete with: (1) 12" Dia. vibratory feed hopper; totally sealed electronically metered glue system with: "Automatic" injector flushing; (1) 4-3/4 G (18 L) Glue Tank & (1) 2.37 G (9 L) water tank.(4) Inclined vertical pneumatic holddown clamps; function selector control for boring only or doweling; anti-slip table surface; rack & pinion drive; centralized dust collection manifold.

WEEKE - ABD 100: CNC Bore, Glue & Dowel Inserter -- Specifications(1) Horizontal drilling aggregate with: (1) Individual spindle; (1) glue & dowel injector with glue flow control; (1) 23" dia. x 4" D vibrating hopper dowel feeder. -- Working Capacity: Material size: 20 mm - 1,250 mm (3/4" - 49") Long; 50 mm - 800 mm (1.9" - 31-1/2") wide; 10 mm - 60 mm 0.4" - 2.4") thick.Machine is set up for: 8 mm Dia. x 30 or 35 mm long dowels (additional dowel sizes are optional). -- (2) Separate working fields with: (4) 2-3/4"; LR x 3"; FB Pneumatic top clamps; can process up to (4) parts independently on the: Left-hand, right-hand, or center stops; work can be loaded in (1) field while it is being machined in the other to allow fast production of varying parts. -- Operator InterfacePC Front-End with: Windows XP + WEEKE "WoodWOP 5.0" Operating System with graphic programming & error messaging; USB front side bus; 17" TFT flatscreen monitor; CD-RW drive; modem; standard keyboard; mouse.Software allows program design with automatic mirror image by use of an active center stop located: 600 mm (23.6") From zero. -- WEEKE "ABD 100": Designed for small or large capacity horizontal drilling, gluing, and dowel insertion; built on Heavy-Duty welded steel base; main horizontal beams hold the carriage for the boring head & glue/water injector. NOTE: Monitor needs to be replaced

WEEKE ABD 050 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications:(1) Horizontal drilling aggregate with (1) individual spindle; with servo control of the "X" Axis; (1) glue & dowel injector with glue flow control; (1) vibrating hopper dowel feeder. -- Working Capacity:Part size: Length 20 mm - 1,250 mm (.75" - 49") Width 20 mm - 800 mm (.75" - 31.5") Thickness 10 mm - 60 mm (.4" - 2.4") thick.Machine is set up for 8 mm Dia. x 30 or 35 mm long dowels -- Work Area(2) Separate working fields with (4) pneumatic top clamps can process up to (2) parts independently on the left-hand, right-hand or center stops; work pieces can be loaded in (1) field while being machined in the other to allow fast production of varying parts. -- Operator Interface:PC Front-end with Homag Power Control PC 85T, WoodWOP 5.0 operating system with graphic programming & error messaging.17" TFT flat screen monitor, CD-RW drive, 1.44 MB floppy drive, standard keyboard & mouse; Software allows program design with automatic mirror-image by use of an active center stop located 600 mm (23.6") from zero. -- Complete with:Bar code control reader. All manuals, documentation & program disk provided with machine. -- Actual Model is WEEKE ABD 050.

Used YAMAMOTO 30-opening, premium quality, Plywood Hot Press. -- 500 Tons pressing capacity. -- Daylight is 4.7"(120mm). -- Press plates are 54" x 108" x 1.5" (1,370 x 2,700 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- Professional removal and loading available at Buyer's cost.

Used YAMAMOTO 45-opening, premium quality, Plywood Hot Press. -- 500 Tons Pressure Capacity. -- Daylight is 2.75" (70 mm). -- Press Platens are 106" x 53" x 1.57" (2,700 x 1,350 x 40 mm). -- Auto loader feeds charger using pusher arm to load press. -- Pie rack with automatic unloader. -- Hydraulic system with accumulation tank. -- Heated by steam. -- This particular press was only operated for about 1-1/2 years. -- Professional removal and loading available at Buyer's cost.