Friulmac End Matcher For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
4 Results Found
Sort By 
STANDARD LISTINGS
2004 Friulmac RANDOMAT-E  End Matcher
$32,700

FRUILMAC "RANDOMAT- E" End Matcher; -- For End Matching flooring or cabinet & entry door rails; feed thru system allows continuous feeding of random length parts with any kind of profile.Capacity & Description: -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width; feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high speed shaper motors which pneumatically traverse in tandom for each cutting cycle. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Controller & Operator Interface: -- Touch-Screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with led readout on the controls.

Jeff Terrill
800-374-5009 ext:349
Call

2004 Friulmac RANDOMAT-E  End Matcher
$23,700

FRIULMAC Randomat E End Matcher/Tenoner. -- For end matching flooring or tenoning cabinet & entry door rails; feed through system allows continuous feeding of random length parts with any kind of profile.Specifications & Capacity: -- 1-3/16" Min. - 9-7/8" max. width cap., 6-5/16" min. - 120" max. length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10 - 14) cycles/Min depending on part length. -- Shaper Heads: Twin 7.5 HP - 5,700 RPM high speed shaper motors, 40 mm spindle dia., spindles pneumatically traverse in tandom for each cutting cycle. -- Feed system with: (2) 98" Long x 10" wide powered in- & outfeed belt conveyors, (2) 1.5 HP feed motors with inverter control. -- Parts are automatically fed & positioned with sensors and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed & positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Operator & Machine Controls: -- PLC Controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with LED readout on the controls. -- Cutting Station with: Overhead holddown wheels & 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. -- NOTE: Will include dust collection up to the blast/closing gate.High speed, CNC controlled, Endmatcher for flooring, doors, waiscoat, T&G ceilings; will produce 13,000 ft of end-flooring in an 8-hour shift.Includes: (2) sets of heads for 1/2" and 3/4" materialNOTE: Electrical Cabinet turned 90-degrees and Hood eliminated to allow the machine to sit against a wall.

Jeff Terrill
800-374-5009 ext:349
Call

2007 Friulmac RANDOMAT-E  End Matcher
$54,700

FRUILMAC RANDOMAT-E End Matcher;For end matching flooring or cabinet & entry door rails; feed thru system allows continuous feeding of random length parts with any kind of profile. -- Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity. -- Approx. (10) cycles/Min depending on part length & width; feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part. -- Equipped with: Twin 7.5 HP - 7,500 RPM high speed shaper motors, which pneumatically traverse in tandem for each cutting cycle. -- Touch-Screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation. -- Variable feed speed conveyor line; shaper head advance with led readout on the controls. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps. -- NOTE: Includes end match tooling

Jeff Terrill
800-374-5009 ext:349
Call

2004 Friulmac RANDOMAT-E  End Matcher
$29,700

FRUILMAC "RANDOMAT- E" End Matcher; -- For End Matching flooring or cabinet & entry door rails; feed thru system allows continuous feeding of random length parts with any kind of profile.Capacity & Description: -- Width cap. 1-3/16" x 9-7/8'; length cap. 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness cap. -- Approx. (10) cycles/Min depending on part length & width; feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic. -- Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.Equipped with: -- Twin 7.5 HP - 7,500 RPM high speed shaper motors which pneumatically traverse in tandom for each cutting cycle. -- Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.Controller & Operator Interface: -- Touch-Screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation, variable feed speed conveyor line, and shaper head advance with led readout on the controls.

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved