Woodworking Equipment For Sale

SCM DMC TC 1350 RKP Wide Belt Sander ( 3 ) HeadsWidth cap. 53" , Drum, Combination Head, PlatenHead Configuration1st Head: 35 hp 9″ Spiral Drum2nd Head: 24 hp/30 hp dual RPM 7″ Spiral Drum/Combination Head W/Segmented Platen,3rd Head: 15 hp VFD driven multi speed Segmented Platen4th Station: Panel CleanerSpecifications -- 53″ working width, 656 hours of operation, --. Yes, it has (2) segmented platens. It’s from a custom shop and was utilized for very specific custom work and nothing else. -- 6.5″ thickness capacityEquipped with & Features -- Auto thickness calibration, -- Vacuum bed, -- 5 hp vfd controlled feed speed, and multiple modes. -- There is also a manual and (4) spare platens.Note: Only issue found , are lines on the LCD Screen (see pictures).

SCMI OLIMPIC K 560 R EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Edge Capacity: 0.4 to 6 mm (0.016 to 1/4") for strip feeding. -- Panel Capacity: Min. panel width: 60 mm (2.375"); min. panel length: 140 mm (5-1/2").Min./max. Panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 600 mm (24").Equipped with: -- Pre-milling Station: (2) 2.0 HP (1.5 kW) motors; rectifies/cleans panels already sized. -- Adjustable Infeed Fence: Manually preset with digital indicator; pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with: Quick change/disconnect Teflon glue pot for fast glue tanks change if needed; Heat up time approx. (10) Min. -- Pressure Section: Manual digital positioning; Teflon coated pneumatic driven roller & (2) spring loaded idle rollers.Workstations: -- End Trimming Station: (2) Front & rear 1/2 HP - 12,000 RPM motors mounted on THK guides; swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit: (2) 0.7 HP - 12.000 RPM Motors; capable of tilting & pneumatic positioning for (3) settings, flush/bevel/radius trimming for quick setup. -- Corner Rounding Unit - "Round 2M" with: (2) 0.80 HP Independent motors that slide on THK guides. -- Top & Bottom Profile Scraping Unit with: Digital indicators; large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue scraping Unit: Eliminates any excess glue. -- Buffing Unit: (2)Top/bottom 1/4 HP - 2,800 RPM motors; tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with: 12" Touchscreen display; capable of storing (100) programs. -- Machine automation by PLC function and encoder positioned in the panel feed track pinion. -- Diagnostics for a quick solution to errors: Process statistics data (i.e., number of pieces/edges) and track feeding.Features & Complete with: -- 2-Speed feed speed of 40 & 60 FPM (12 & 18 MPM); (1) 2-1/2 HP feed drive motor. -- 200 Hz frequency inverter for all trimming units. -- Manual adjustable top hold-down pressure beam. -- Full sound enclosure cover and outboard panel support. -- Actual Model is: SCM OLIMPIC K 560 R

SCMI OLIMPIC K 600 T-ERL EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:0.4 to 3 mm For roll feeding and up to 8 mm for strip feeding. -- Panel Capacity: Min. panel width: 60 mm (2.375"); Min. panel length: 140 mm (5-1/2").Min./max. panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 508 mm (20").Feed speed: 36 & 52 FPM (2.5 HP feed motor).Equipped with: -- Adjustable Infeed Fence:Manually preset with: Digital indicator, pneumatic in/out positioning; 1-coil feeder for banding up to 3mm thick with a 3 mm guillotine. -- Gluing Station:For EVA (Hot Melt) with quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. (8 - 10) Min. -- Pressure Section:Manual digital positioning: Teflon-coated pneumatic driven roller & (2) spring-loaded idle rollers. - Includes "Strip Feed Magazine".Workstations: -- End Trimming Station: "K-SEL 2": Front & rear 0.5 HP - 12,000 RPM motor mounted on THK guides;, swivels 0° - 15°, rapid setup between straight and angled cutting with the automatic swivel cylinder. -- Top & Bottom Trimming Unit: 2 x 1.0 HP - 12,000 RPM Motors capable of tilting 0° to 25° degrees with copy wheels; pneumatic positioning for (3) settings: Flush/bevel/radius trimming via precision digital indicators; goes from 3 mm PVC to thin tape through the Controller for quick setup. -- 2-Motor Corner Rounding:(2) 0.80 HP Independent motors that slide on THK guides; features of the "Round-K" (SCM patent) allow for the double function of both the simultaneous trimming and rounding operations. -- Top & Bottom Profile Scraping Unit: "RAS/K" Profile scrape station for: 3 mm PVC, pneumatic positioning with digital indicators; large dia. copy wheels for max. accuracy, and pneumatic in/out positioning. -- Buffing Unit: Top/bottom; 2 x 1/4 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with: 12" Touchscreen displays; capable of storing (100) programs.Machine automation by PLC function and encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors; process statistics data, i.e., No. of pieces/edges and track feeding.Features & Complete with: -- (1) 2.0 HP Feed drive motor. -- 200 Hz Frequency inverter for all trimming unit.; -- Manual adjustable hold-down pressure beam -- Full sound enclosure cover and outboard panel support. -- Adjustable side support. -- Replaceable track pads. -- Digital inverter for electronic motor braking. -- Acoustical safety enclosure. -- Dust Collection: Working units are individually ported on the top of the safety enclosure for max. efficiency. -- Actual model is: SCM OLIMPIC K 600 T-ERL

SCMI MINI-MAX ME 25 EDGEBANDER, SINGLE SIDED SINGLE PHASE0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.Workstations: -- "ME 25" 2-Head -- Single motor end trim (0.8 HP - 12,000 RPM motor) -- Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters. -- Top & bottom scraping station. -- Top & bottom buffing, 3,000 RPM motors.22 FPM Fixed feed speed with 0.8 HP drive.Complete with: Sound enclosure, out rigger panel support, frequency converter, and used tooling on the stations.Features: Control Panel on machine infeed side Machine frame made of high rigidity ribbed steel to guarantee excellent support Top thick steel pressure beam with rubber coated wheels Manual adjustment of top beam with Auto positioning of operating units Numeric indicator of selected panel thickness Glue smoke-specific exhaust outlet; centralized extraction of the dust Panel support roller which can be extended the entire length of the machine

SCMI T-130 ShaperSolid Heavy Duty Shaper with 1-1/4" Dia. fixed spindle. Specifications: -- 8 HP belt drive motor with (5) spindle speeds of 3,000 - 4,500 - 6,000 - 7,000 & 10,000 RPM. -- 6" Max. cap. under nut. -- 47" x 28-1/2" Cast Iron table

SCMI OLIMPIC K 560 T-ER2 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Edge Capacity: 0.4 to 6 mm (0.016 to 1/4") for strip feeding. -- Panel Capacity: Min. panel width: 60 mm (2.375"); min. panel length: 140 mm (5-1/2").Min./max. Panel thickness: 8 - 54 mm (0.375" - 2.125"); min. distance between panels: 600 mm (24").Equipped with: -- Pre-milling Station: (2) 2.0 HP (1.5 kW) motors; rectifies/cleans panels already sized. -- Adjustable Infeed Fence: Manually preset with digital indicator; pneumatic in/out positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with: Quick change/disconnect Teflon glue pot for fast glue tanks change if needed; Heat up time approx. (10) Min. -- Pressure Section: Manual digital positioning; Teflon coated pneumatic driven roller & (2) spring loaded idle rollers.Workstations: -- End Trimming Station: (2) Front & rear 1/2 HP - 12,000 RPM motors mounted on THK guides; swivels 0° - 15° for straight & angle cutting. -- Top & Bottom Trimming Unit: (2) 0.7 HP - 12.000 RPM Motors; capable of tilting & pneumatic positioning for (3) settings, flush/bevel/radius trimming for quick setup. -- Corner Rounding Unit - "Round 2M" with: (2) 0.80 HP Independent motors that slide on THK guides. -- Top & Bottom Profile Scraping Unit with: Digital indicators; large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue scraping Unit: Eliminates any excess glue. -- Buffing Unit: (2)Top/bottom 1/4 HP - 2,800 RPM motors; tilting up to 12°.Operator & Machine Control: -- "STARTOUCH" Controller with: 12" Touchscreen display; capable of storing (100) programs. -- Machine automation by PLC function and encoder positioned in the panel feed track pinion. -- Diagnostics for a quick solution to errors: Process statistics data (i.e., number of pieces/edges) and track feeding.Features & Complete with: -- 2-Speed feed speed of 40 & 60 FPM (12 & 18 MPM); (1) 2-1/2 HP feed drive motor. -- 200 Hz frequency inverter for all trimming units. -- Manual adjustable top hold-down pressure beam. -- Full sound enclosure cover and outboard panel support. -- Actual Model is: SCM OLIMPIC K 560 T-ER2

SCMI K 208E SINGLE SIDED EDGEBANDER5/16" (8 mm) Max. edge cap., 1-3/4" max. banding height, 2-3/8" min. panel width and 6-/14" min. length. Equipped with: Automatic strip & coil feed magazine, Teflon coated glue pot (heat up time 10 Min), upgraded to Heavy Duty 3 mm PVC cap. guillotine, 3-roll pressure unit w/pneumatic controls. 42 FPM Fixed feed speed via 1 HP drive.Workstations: -- Double motor front & rear end trim (0.3 HP - 12,000 RPM motor ea.), tilts 0° - 15°, End trimmer mounted on 45° THK guides. -- Top & bottom trim station (0.8 HP - 12.000 RPM motor ea.), bevels 0° - 15°. -- Top & bottom PVC scraper for up to 5 mm radius; -- Top & bottom buffing unit (0.33 HP - 2,800 RPM motors). Complete with: Swivel control panel, pneumatic positioning of super finish, full cover sound enclosure, 200 Cy - 5 kW frequency converter & tooling.

SCMI - SIGMA 90 Plus, ...Front-Load Auto. Panel SawSpecifications: -- 126" Max. rip cut cap.; 126" max. front/back; 2-9/16" cutting height; 15 HP main saw motor; 4,600 RPM main blade speed; 2 HP scoring motor, 6,200 RPM score blade speed. -- Hydraulic feed speed variator for saw carriage, 50 - 100 FPM, return speed 100 FPM, automatic saw carriage lubrication, balanced on hardened cylindrical guides, external score saw adjustment. -- THK guides for vertical saw movement; programmable rear fence with (5) material grippers, rack & pinion movement, 26 FPM forward and reverse; grippers fit into a slotted pressure beam for positive material control during the final cut. -- Rear support rails with rollers; (1) front fixed Bakelite-coated air table 59" x 20" and (2) movable 59" x 20" air tables. -- Complete with: -- Automatic crosscut side aligner to 72-3/4"; plastic safety sectors & emergency bar surround cutting area. -- Specifications subject to verification.

SCM SIGMA SZ 110 PLAST Automatic Panel Saw;This machine is Ideal for Plastic Materials. -- Specifications: Working cap. 149.6" (3,800 mm) Max. rip cut cap. 149.6" (3,800 mm) pusher stroke; 4.5" (115 mm) max. saw blade projection.24 HP (17.8 KW) main saw motor Inverter controlled for various plastics, variable speed from 0 - 3,900 RPM; 2 HP (1.5 kW) scoring saw motor (4,200 RPM).Main blade diameter: 15.75" (400 mm), Main blade arbor diameter: 80 mm; Scoring blade diameter: 7.87" (200 mm), Scoring blade arbor diameter: 80 mm.Manual scoring blade adjustment with digital indicator. Automatic exclusion of scoring unit when motor is in off position. -- Saw carriage: Feed speed 0 - 442 FPM (0 - 134 MPM), return speed 442 FPM (134 MPM),Automatic saw carriage lubrication, balanced on hardened cylindrical guides; external score saw adjustment, THK guides for vertical saw movement. -- Pusher Fence Feed Speed 0 - 230 FPM (0 - 70 MPM) forward speed, 230 FPM (70 MPM) reverse speed.Programmable rear fence with (9) material gripper clamps with twin fingers for thin materials, rack & pinion movement,Grippers fit into a slotted pressure beam for positive material control during the final cut. -- Operator & Machine Control:PC front-end with SCM Real-time "WinCut" + Windows "7" operating system; Pentium 300 MHz, 6.4 GB hard drive, 64 MB RAM,17" Color VGA flat panel Touchscreen monitor, on-screen diagnostics & production reports; (2) serial ports & (1) parallel port, spacing available for networking cards. "Cutty" optimization software is included which allows for (2) different sheet sizes and (22) different parts, each part is allowed a max. quantity of 300. -- Complete with: Side alignment device: Min. part width 2.8"; Max. part width 47.24". Rear support rails with rollers.(1) Front fixed air table 98" x 23" (2,500 x 584 mm), (2) Adjustable air tables 98" x 23" (2,500 x 584 mm).Plastic safety guards, emergency stop bar; enclosed cutting area; triple dust collector outlet.Actual model is SCM SIGMA SZ 110 PLAST.

SCM - SIGMA IMPACT 85K, ...CNC Front-Load Panel SawSpecifications: -- 126" (3,200 mm) Max. rip cut cap., 126" (3,200 mm) max. front/back (85 mm), max. saw blade projection 3.35"; 18 HP main saw motor, 13.78" (350 mm) dia. - 3,900 RPM main blade; 2 HP scoring motor, 6.3" (160 mm) dia. - 6,300 RPM score blade; external score saw adjustment.Feed speed variator for saw carriage, 0 - 443 FPM; return speed 443 FPM; automatic saw carriage lubrication, travels on precision round and hardened guides; THK guides for vertical saw movement. -- Equipped with: -- Programmable rear fence with: (6) Material grippers, rack & pinion movement, 230 FPM forward and 230 FPM reverse; grippers fit into a slotted pressure beam for positive material control during the final cut. -- "PC" Front-End with 15" Color monitor display with: (32) Key standard PC type keypad, (2) axes positioning readout (saw carriage and pusher). -- Automatic/semi-automatic modes interruptible for blade changes; dynamic (1,000) line memory, RS-232 serial port for PC connection; diagnostic readout of malfunctions, positioning errors, and command errors. -- Includes: -- Rear support rails with rollers; (1) front fixed air table 98" x 24", and (2) movable 59" x 15-3/4" air tables; automatic crosscut side aligner from 2.36" out to 47.24", plastic safety segmented curtain & emergency bar surround cutting area. Dust requirements 2700 CFM with (2) outlets 120 mm, (1) 150 mm in diameter.

SCMI STARTECH/23 23-Spindle Construction Boring Machine.Specifications: -- Distance between spindles 32 mm (1.26"), Maximum drilling head distance 704 mm (27.72"), Maximum drilling depth 45 mm (1.77"). -- Panel thickness 10 - 75 mm (0.39" - 2.95"), Maximum panel width under bridge 1,000 mm (39.37"). -- Maximum panel size:270 mm(10.63") (with vertical head), 130 mm (5.12") (with horizontal head). -- Drilling head stroke 63 mm (2.48"), Tool diameter 5 - 10 mm (0.20" - 0.39"), Tool length 55 - 75 mm (2.17" - 2.95"). -- 26-1/4" x 40" x 33-1/2" H Table, 2.64 kW (3-1/2 HP) 3,390 RPM Motor.Equipped with: -- 23-Spindle Boring head (Aluminum alloy single block), Drills vertically from top & horizontally from rear. -- Manual tilt with Gas shock cylinder assist, Positive stop at 45° for boring at angle. -- 6-Position Turret depth stop. -- (2) 3" Diameter Air hold-down clamps, Foot pedal operated. -- Index pins for line boring, 15-1/4" L x 1-1/2" H Side fences.Complete with: Operation & Maintenance Manual & SHOP FOX Mobile Base with Swivel Casters. -- Dimensions: 58" x 48" x 46" H. Weight: 1,100 Lbs.

SCM OLIMPIC K 360TE COMPACT EDGEBANDER WITH PRE-MILLING .Specifications: -- Edge Capacity, 0.4 to 6 mm (0.016to 1/4") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-1/2").Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator, pneumatic in/out positioning. -- Pre-Milling Station, RT-VP: Spindles 2 x 2.0 HP, 19,000 RPM, (1) with PLC controlled jump action and diamond cutter heads. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Manual digital positioning, (3) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station: Front & rear 2 x 0.25 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Trimming Unit Flush/Bevel/Radius: Top/Bottom remote (via control panel) pneumatic positioning for (3) settings, flush/bevel/radius trimming, 2 x 0.7 HP - 12.000 RPM motors with precision digital indicators for quick setup. -- Profile Scraping Unit "RAS/V": Top/Bottom, manual pre-set up with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°. Controls: -- Orion 1 Plus Controller, fixed at in-feed of machine. with soft keys, graphics and 4" LCD display panel. It handles most machine set-up functions and workstations. Complete With & Features: -- Feed-speed, 36 FPM fixed, 1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units. -- Manual adjustable hold-down pressure beam, full sound enclosure cover and outboard panel support.Condition: ATFS

SCM SANDYA 3-RCS-95 Wide Belt Sander 9 ( 2 ) Heads36" width cap. Drum, PlatenHead Configuration1st Head : Contact Drum2nd Head : Combination HeadSpecifications: -- 1st Head: Contact roll, 4-3/4" dia.; -- 2nd Head: Combination head, with rubber covered contact roll, 4-3/4" and 2" wide finishing platen -- Both contact rolls & platen with cam height adjustments. -- 30 HP Motor driving both heads;Equipped with & Features -- 37" x 75" abrasive belts -- Electronic tracking and pneumatic belt tensioning. -- Infeed & outfeed rolls, -- Dual feed speed of 15 & 30 FPM, -- 0.5 HP feed drive -- Automatic part thickness adjustment -- Motorized thickness opening via (4) precision conveyor bed jacks with LED readout, -- 0" - 6-1/4" opening. -- Motor load meters, -- Infeed & outfeed conveyor roller extensions, (2) 5" dust ports.

SCMI OLIMPIC K 600 T-ERL EDGEBANDER (W/PRE-MILL/CORNER ROUNDING): -- Specifications:0.4 to 3 mm For roll feeding and up to 8 mm for strip feeding.Panel Capacity: Min. Panel width 60 mm (2.375"); Min Panel length 140 mm (5.5").Min./max. Panel thickness 8 - 54 mm (0.375" - 2.125"); Minimum distance between panels 508 mm (20").Feed speed 36 and 52 FPM (2.5 HP feed motor) -- Equipped With:Adjustable In-feed Fence:Manually pre-set with digital indicator, pneumatic in/out positioning. 1-Coil feeder: For banding up to 3mm thick with a 3 mm guillotine.Gluing Station:For EVA (Hot Melt) with Quick change/disconnect Teflon glue pot for fast glue tanks change if needed. Heat-up time approx. 8-10 Min.Pressure Section:Manual digital positioning: Teflon-coated pneumatic driven roller & (2) spring-loaded idle rollers. Includes "Strip Feed Magazine" -- Workstations:End Trimming Station: "K-SEL 2" Front & rear 0.5 HP, 12,000 RPM motor mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder. Top & Bottom Trimming Unit: 2 x 1.0 HP - 12.000 RPM Motors capable of tilting 0 to 25 degrees with copy wheels. Pneumatic positioning for (3) settings, flush/bevel/radius trimming via precision digital indicators to go from 3 mm PVC to thin tape through the controller for quick setup.Two Motor Corner Rounding:(2) 0.80 HP independent motors that slide on THK guides. The features of the "Round-K" (SCM patent) allow for the double function of both the simultaneous trimming and rounding operations Top & Bottom Profile Scraping Unit: "RAS/K" profile scrape station for 3 mm PVC with pneumatic positioning, with digital indicators. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. Buffing Unit: Top/bottom, 2 x 0.25 HP - 2,800 RPM motors, tilting up to 12°.Operator & Machine Control: "STARTOUCH" Controller with 12" touchscreen display, capable of storing 100 programs.Machine automation by PLC function and encoder positioned in the panel feed track pinion.Diagnostics for a quick solution to errors. Process statistics data, ie. No. of pieces/edges, and track feeding. -- Features & Complete With:1 x 2.0 HP feed drive motor; 200 Hz frequency inverter for all trimming units;Manual adjustable hold-down pressure beam;Full sound enclosure cover and outboard panel support.Adjustable side support. Replaceable track pads. Digital inverter for electronic motor braking Acoustical safety enclosure.Dust Collection: Working units are individually ported on the top of the safety enclosure for maximum efficiency.Suitable Transformer for 230V to 600V, 3 Ph. Actual model is SCM OLIMPIC K 600 T-ERL.

SCM MINIMAX T-3 SHAPER3/4" Dia. solid spindle, 3 HP motor,(3) spindle speeds of 4,000 - 7,000 & 9,500 RPM; table size 22" x 37" with table insert openings. -- Complete with: Adjustable fence, magnetic starter w/overload protection, reversing switch and 5" dia. dust outlet.

SCMI OLIMPIC K 800 T-FR2 EDGEBANDER EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): Specifications: -- Edge Capacity, 0.4 to 8 mm (0.016 to 5/16") for strip feeding. -- Panel Capacity, min. width 65 mm and 140 mm min. length, (2-3/8" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8"). Equipped With: -- Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device. -- Pre-Milling Station, RT-E: Spindles 2 x 3.0 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning. -- Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. -- Gluing Station: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Min. -- Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. Workstations: -- End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0ø - 15ø, rapid set up between straight and angled cutting with the automatic swivel cylinder. -- Flush Trimming Unit: Top/Bottom, 2 x 1.0 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. -- Bevel/Radius Trimming Unit: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly. -- Corner Rounding / Trimming Unit: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. -- Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. -- Glue Scraping Unit, "RC-V": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. -- Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°. -- Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.Controls: -- Startouch Controller, 12" color touch screen, swivels 270° at in-feed of machine. Capable to store (100) programs, (6) at the touch of a single key. Graphical display of all working units. Tracks production data, diagnostic information and monitors maintenance schedules. Complete With & Features: -- Feed-speed, 36/52 FPM, 1 x 2.5 HP feed drive motor, 200 Hz frequency inverter for all trimming units. -- Electronic, programmable hold-down pressure beam positioning, lighted safety/sound enclosure cover and outboard panel support. -- Options Include: Dust Manifold as pictured. -- Actual Model: OLIMPIC K 800 T-FR2

SCM - S520 E, ...Planer Specifications: -- 20" Width cap., 9 HP main motor - 4-3/4" dia. 4-knife TERSA cutterhead at 4,500 RPM. -- 1/8" - 9-1/4" Powered opening with digital readout for fine adjustment; max. depth of cut 5/16"; 10" min. length of workpiece. -- (4) Feed speeds: 20 - 33 - 43 & 56 FPM; table size 20-3/4" x 39".Equipped with: -- Chipbreaker, sectional grooved infeed & solid outfeed rollers, (2) adjustable bed rollers. -- Complete with: Magnetic starter & shaving hood.

SCM TECH Z 30 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications:Working Field "X" axis 120" (3,050 mm); "Y" axis 52.7" (1,340 mm) for routing & 44" (1,118 mm) for boring; "Z" axis stroke 7.8" (200 mm); max. material thickness 3.9" (100 mm). -- Positioning Speed:"X" & "Y" Axes are 197 FPM (60 MPM); "Z" axis is 72 FPM (22 MPM).Axes positioning by: AC Brushless motors and YASKAWA drives; high precision ball screw drive system in "X", "Y". "Z" Axes;All axes ride on prismatic guideways & sliding blocks. -- Worktable:(6) "TV" Tubeless mobile support rails, (2) vacuum pods per rail; (4) pneumatic lifter rails for heavy panels.(6) Pneumatic pop-up backstops, (6) pneumatic pop-up front stops; (2) pneumatic pop-up side stops.LED Display positioning assistance for the support rails & vacuum pods; (2) independent working fields. -- Boring Head:3 HP (2.2 kW) motor - 4,000 RPM; (15) independent vertical spindles: (8) Spindles in "X" & (7) spindles in "Y".(6) Horizontal spindles (2 + 2) in "X" & (1 + 1) in "Y-axis".(1) X-axis grooving saw with 100 mm dia. blade - 6,000 RPM. -- Machining:(1) 10 HP (7.5 kW) Electro-spindle router with: HSK F63 Adaptor; variable speed from 1,000 - 24,000 RPM, max. torque achieved at 12,000 RPM.Static inverter for stepless speed & rapid shutdown rotation.(1) 6-Position ATC tool plate mounted on the on the machine for "on the fly" ATC; max. tool weight is 8 kG (17.6 Lbs). -- Operator & Machine Control:PC Front-End with: SCM "UNIVERSAL K2" + "Xilog Plus" + Windows "XP" Pro Operating System; 15" CRT color display, CELERON 2 GHz processor, enclosed in air-conditioned cabinet. -- Complete with:(1) 100 m³/Hr Vacuum Pump; automatic lubrication system; "BUMP STOP" safety system. -- Actual Model is SCM TECH Z30 R6

SCM Sandya 7 S Wide Belt Sander (2) Heads43" Width cap, Drum, Combination HeadHead Configuration1st Head: Contact roll, 6-1/4" dia., 25 HP motor; 2nd Head: Combination head, rubber-covered contact roll, 6-1/4" dia., and 2" wide finishing platen, 18 HP motor.Specifications: -- Great solid wood finish Sander. ÷ 43" x 75" or 85" Abrasive belts with electronic tracking & pneumatic belt tensioning. -- Conveyor belt feed with variable feed speed, 10 - 60 FPM, 3 HP motor, -- Automatic part thickness adjustment, motorized thickness opening with LED readout, -- 0" - 6-1/4" via (4) precision conveyor bed jacks.Equipped with & Feature: -- Infeed & outfeed spring loaded rubber covered holddown rolls on all heads, -- Motor load meters -- Infeed and outfeed conveyor extensions.

SCMI SANDYA 3 Wide Belt Sander, (2) Heads37" Width cap. Drum, and Combination HeadHead Configuration:1st Head: 4" Dia. Steel Contact Drum 2nd Head: Combination head, rubber-covered contact roll, 4" dia. and 2" wide finishing platenSpecifications: -- Air jump platen with timers to control raise & lower of platen on leading and trailing panel edge. -- 30 HP motor driving both heads. -- 37" x 75" Abrasive belts with electronic tracking and pneumatic belt tensioning.Feed System; -- Infeed & outfeed spring loaded holddown rolls. -- Dual feed speed 15 & 30 FPM, 0.5 HP feed drive. -- 0 - 6" Motorized thickness opening via (4) precision conveyor bed jacks with LED readout.Equipped with & Features: -- Automatic part thickness adjustment. -- Motor load meters -- 21" infeed & outfeed conveyors each with (2) rubber-covered rolls -- (2) 5" Dust ports.Note from the seller: Lightly used machine in a two-man shop, primarily sanded our face frames for kitchen jobs, which amounted to a couple sets a month. works well, had an opportunity to purchase a bigger sander so this one is redundant.