Dust Collection Systems For Sale

ATLANTIC - X-5: Modular Dust Collection SystemSpecifications -- Rated @ 3,500 CFM with: 5.5" Static pressure WG. -- (16) 8" x 60" Poly twill cloth; "Quick Release" filter tubes; approx. 440 sq/ft. total cloth area; discharge to (3) plastic bags. -- Equipped with: 5 HP - 3,500 RPM Blower drive centrifugal fan assembly; anti-spark cast impeller; 13.3/4" inlet dia. -- System includes: 230 Volt (factory installed) magnetic starter. -- X-Series Dust Collectors are compliant with: NFPA Regulations 664 & 654 for enclosureless Dust Collectors.Very strong draw; quiet. Includes: 60 Feet, ($ 2,000) quick clamp disconnect pipes.

Belfab Pyradia NBM-OP Dust Collector (3) Systems available

BELFAB - NBM5-20: Modular Dust CollectorPatented modular technology; 6,000 CFM with: Static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with: (1) Service door & (1) explosion door per NFPA 68 safety regulations; unit has (5) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" Poly twill filter tubes. -- Direct Drive centrifugal Fan Assembly with: HUMMER 20 HP @ 1,800 RPM High-Efficiency TEFC blower Motor; UL & CSA approved; AMCA Class-C anti-spark blower assembly with: Heavy-Duty steel impeller; 16" inlet dia.; 825 sq./ft. filter surface area. -- Control Panel & Shaker Mechanism includes: (2) Interlock magnetic starters; (1) for blower motor & (1) for automatic shaker mechanism; adjustable timer; pilot lights all prewired. -- Includes (10) Plastic drum.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP, 3,600 RPM, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection.Equipped with: -- (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) cloth collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Note: No motor starter included.

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: Capacity of 75 HP (motor not included) side-mounted blower. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: Main starter with control panel. -- System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. -- Note1: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight.

CAM-WOOD DC-10 STAX Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. Then the remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 10 HP blower with 5,000 CFM. -- Inlet Diameter 13" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

CAM-WOOD DC-07 STA Cyclone Dust Collector w/ After-filtersNew designed two-stage cyclones. As the “dirty"; air stream enters the collector, the heavy particles are separated by cyclonic action and fall to the bottom storage bag. The remaining air stream with fine dust goes through the impeller, it can increase dramatically the life of the impeller & motor preventing damage from large material.Features: -- 7.5 HP blower with 4,200 CFM. -- Inlet Diameter 12" x 4" x 5. -- Heavy sheet metal frame and base. -- Extra-large radial-fin type steel impeller for high-efficiency airflow. -- Heavy duty totally enclosed industrial motor for maximum air suction and extended service life. -- Quick-release clamps are used to tighten the bags; this helps to reduce downtime when doing maintenance. -- Low sound levels to keep the working area quiet. -- Includes: (2) Collection drums

CAM-WOOD DC-102-3X Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 460 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

CAM-WOOD DC-102 Dust CollectorSmall radial-finned Dust Collector mounted on wheels for portability.Features & Specifications: -- Large 13-1/2" fan that produces 2,100 CFM. -- Heavy Duty 3 HP motor pre-wired at 230 Volts. -- Large capacity dual station cloth top bags of 31.2 sq. ft. total cloth filter area. -- Low sound level of 75 - 90 dB.

CAM-WOOD DC-8100X Dust Collector Radial-finned type impeller for the best efficiency with large 15-3/4" dia. fan that produces 7400 CFM.Includes: -- Heavy Duty 10 HP motor pre-wired at 230 V. -- 10" Inlet -- (4) Large top filter bags and (4) lower collection bags with 48 cu. ft. capacity. -- Standard steel spring clamps to secure bags without leakage.Features: -- Low sound level of 75 - 90 Db keeps the work area quiet. -- Optional connection for using collection barrels.Note: 230 or 460 Volt, 60 Cy, 3-Ph please advise.

CAM-WOOD DC-535X DUST COLLECTOR 2900 CFM5 HP Motor and 14" Dia. Radial-fin type steel impeller to get the best efficiency usage.Specifications: -- Two top filters and two collection bags. -- Heavy-duty motor for powerful operation. -- Larger size impeller and extra long top air exhaust bags enabling to collect sawdust and wood chips more easily. -- Standard steel spring clamps to secure the bags with the body without leaking dust. -- Low sound levels keep the working area quiet. -- Replacement bags or 5 micron bags for fine dust are available. Optional connect bags for barrels are available.

CAM-WOOD DC-8075 Dust Collector Radial-finned type impeller for the best efficiency with large 15-3/4" dia. fan that produces 5,800 CFM.Includes: -- Heavy Duty 7.5 HP motor pre-wired at 220 V. -- (4) Large top filter bags and (4) lower collection bags with 48 cu. ft. capacity. -- Standard steel spring clamps to secure bags without leakage.Features: -- Low sound level of 75 - 90 db. keeps the work area quiet. -- Optional connection for using barrels.

CAROLINA BLOWER Size 80-6 Material Handling Fan with Motor. --Specification: -- Can handle approx 35,000 CFM @ 11" SP and 840 RPM. -- Comes with: Westinghouse Life-Line (high efficiency) 125 HP, 405T frame, ODP Motor complete with pulleys.. -- Motor is not mounted on base. -- Actual Model is 80-6SD.

CAROLINA BLOWER 45-6 Standard Duty Fan/Motor package assembled complete 30 HP motor. -- Rated at 8,860 CFM at 10" SP. Fan inlet diameter is 19". -- Fabricated with 3/8" thick wheel blades, 1/4" thick housing, primed and painted beige. 30 HP TEFC motor. Unitary base, V-belt drives, shaft, and belt safety guards. -- This is an Industrial Material Handling fan with paddle-wheel construction. Also available in Heavy Duty version at extra cost, with thicker scroll-housing to handle airborne smaller solid wood or similar material.

CAROTHERS & SON - CSL 81BR10 BEI: Pulse Jet Cleaning Baghouse with Rotary Air Lock (RAL). -- General Data: 10,200 CFM at 8:1 Air-to-Cloth ratio; use 1,272 sq./ft. of 16 oz. polyester filter media; (81) bags: 6" Dia. x 120" long; reverse jet filter bag cleaning. -- Main Fan: 25 HP - TEFC 3,353 RPM Primary fan motor designed for about: 19" SP at 10,000 CFM. -- RAL. 4.86 HP - 1,750 RPM FT12 Rotary Air Lock with: 12" Discharge opening; discharge is outfitted with a transition for pneumatic conveying for storage. -- Electrical Controls: 25 HP Fan starter; 2 HP RAL starter; 120 VAC on demand pulse timer; 120 VAC control power. -- Unit is standing. - Dismantle/Rigger Transportation quote available on request -- Outside dimensions approx.: 93" x 93" x 21' High.

Pneumafil – New Style 10’ ·· Pneumafil – Old Style 12’, 10’, 8’ ·· Torrit – 8’, 10’, 12’ ·· Carter Day – 10’ or can be cut to less ·· Airlanco – 10’ ·· Mac – 10’ MCF Style ·· Call for Availability

Siemens Cincinnati HDBI-160 Sawdust Blower Good Condition

Clean Air Industry Dust Collector 230 /460 volt 3 ph Soft start 30 hp motor Control panel 2- rotary airlocks 18,000 cfm With duct work and fittings. New system Never used

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V