Woodworking Equipment For Sale

Table: 14’x5' X-axis: 120? Y-axis: 51? Z-axis: 12? RPM: 6,000 Dimensions: 255?x118?x106? Weight: 14770 Equipped with: Dust Collector Tool changer: 12

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

Working Areas: X-Y Axes Dimensions (Depending on Machine Configuration) (Mm): 5510×1320 Axes: Vectorial Speed X-y Axes M/min: 56 (Prospace), 78 (Prospeed) Z Axis Panel Passage mm: 180 Routing Unit: Motor Power (Max.) Kw (Hp): 15 (20,5) Rotation Speed (Max.) Rpm: 24000 Available Tools on Tool Changer (Max.) Places: 24 Spindle: HSK63 Machine has a drill block that was never used. Still under power but ready to move.

SCMI S630 Planer Capacity 24” x approx. 10” Straight 4-knife cutterhead Sectional chipbreaker and sectional infeed roller Cutterhead motor: 12HP, 230v (currently wired)/460v, 3PH 39” long bed with (2) idler rollers 2 rubber coated outfeed rollers with air assist Motorized raise/lower Includes manuals Solid machine. Currently replacing all bearing and thoroughly cleaning down to the bolts. Operating Instructions, Parts manual, wiring diagram included. Extra set of knives included. Weighs 2000lbs+

SCMI S630K Planer 10 HP Motor Straight Knives

Belt size 43” x 85” (2) six inch dust ports 1st head 24 HP 230 2nd head 18 HP 230 Fiest head contact drum Second head combination with finish platen Feed rate 3 to 68 feet per minute Weight 4550 lbs 230 volt 3-phase

SCMI Sandya Uno 37" Wide Belt Sander

35 spindles (vertical/horizontal) 32mn spacing left/right fences quick release chucks 2800 rpm spindle speed 5 HP 3 Phase

Working height 120 mm working width 240 mm feed speed 6-36 fpm 6’6” straightening infeed

Mini Max Sander 24” width Single head 240 volt 3-phase

SCMI Concept NT Double End Tenoner manufacturer specifications (to be confirmed) 120 Opening 24 Laydown Space Narrow Track 2 Digital Infeed Scale Digital Opening & Closing Top Scoring 3 H.P. Bottom Jump Scoring 3 H.P. 10 H.P. Hogging Unit 15 H.P. Shaping Head 15 H.P. shaping Head Variable Feed Speed Digital Readouts

Combination Head Motor HP 18 HP Motor Type Single Speed Abrasive Belt Speed 18 mps Drum Size 120 mm Drum Type 85 Sh Rubber Platen Size 50 mm Abrasive Belt Length 60" 1st Working Unit Working Width 950 mm Number of Heads Available 1 Feed Motor .7 HP Feed Speed 15 or 30 fpm Maximum Work Piece Thickness 160 mm Minimum Work Piece Length 12.5" Abrasive Belt Size 37" X 60" Compressed Air Requirements 6 Bar (88 PSI) Dust Outlets 1 outlet @ 140 mm Exhaust Requirements 900 CFM Power Requirements 54 amps @ 230V Three Phase

SCMI 1998 Drum Sander

SCMI K203 Edgebander Well maintained machine that is ready to ship!

This machine needs some cleaning up. It is still used periodically in the current shop.

gabbiani g 2 Single beam panel saw for industrial applications - Cutting dimensions: 4500 x 4300 mm - Max. blade protrusion: max 130 mm - Max. saw carriage speed: 170 m/min - Max. pusher speed: 135 m/min - max 22 kW-50Hz main blade engine - Saw carriage runs on rectified round guides (opt. prismatic) - HI-TRONIC device - FLEXCUT 1/S for simultaneous execution of differentiated cuts flexstore elr Loading flexible warehouse with 3-axes - Variable configuration of number station – available surface up to 12 x 60 mt - Storage widtht: 7 - 9 - 12 m - Panel length: mm 1.800 ÷ 3.200 mm (2200 ÷ 4250 mm. Opt.) - Panel width: 800 ÷ 2.200 mm - Panel thickness: 10 ÷ 40 mm (3mm. Opz.) - Max. panel weight: 200 Kg - Loading arm with 3 degrees of freedom + rotation (opt.) - Vacuum loading arm with electronic adjustment depending of the dimension of the panels - Device for the automatic detachment of the panels - Check device for the detachment of the panels - Offcuts management - Mixed stacks management Price includes dismantling and install.

SCMI ROUTECH RECORD 125 N FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working field:"X" axis 125" (3,175 mm), “Y"; axis 60"; (1,524 mm) , "Z" axis stroke is 12" (305 mm). -- Positioning speed:"X" axis 260 FPM (80 MPM), "Y" axis 180 FPM (55 MPM), "Z" axis 82 FPM (25 MPM);Closed loop AC Servo drive system driving precision ground ball screws, all axes ride on extra large precision profile linear guideways. -- Boring Unit:(12) Independent vertical spindles, (7) in "X" axis & (5) in "Y" axis;(6) Horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis. -- Machining:(1) 15 HP (11.2 kW) Liquid Cooled "Power 2000" Electro spindle w/lifetime lubrication & HSK F63 adaptor, spindle speeds from 6,000 - 18,000 RPM;(1) 12-position ATC tool plate mounted on the head for "on the fly" ATC. -- Operator & Machine Control:PC Front end with "ESA-GV Kavara6" + WINDOWS operating system; "NUM 1000" PLC featuring (3) axes simultaneous control,15" high resolution CRT; 1.2 GB Hard drive, ergonomic industrial keyboard & mouse; 1.44MB floppy disk drive; serial ports for RS-232; all housed in a separate dust free cabinet -- Complete with:(1) 250 m³/Hr + (1) 100 m³/Hr vacuum pump; Pressure safety mats. -- Actual Model is SCMI Routech Record 125 N.

SCMI ROUTECH RECORD 125 N FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:5' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working field:"X" axis 125" (3,175 mm), “Y"; axis 60"; (1,524 mm) , "Z" axis stroke is 12" (305 mm). -- Positioning speed:"X" axis 260 FPM (80 MPM), "Y" axis 180 FPM (55 MPM), "Z" axis 82 FPM (25 MPM);Closed loop AC Servo drive system driving precision ground ball screws, all axes ride on extra large precision profile linear guideways. -- Boring Unit:(12) Independent vertical spindles, (7) in "X" axis & (5) in "Y" axis;(6) Horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis. -- Machining:(1) 15 HP (11.2 kW) Liquid Cooled "Power 2000" Electro spindle w/lifetime lubrication & HSK F63 adaptor, spindle speeds from 6,000 - 18,000 RPM;(1) 12-position ATC tool plate mounted on the head for "on the fly" ATC. -- Operator & Machine Control:PC Front end with "ESA-GV Kavara6" + WINDOWS operating system; "NUM 1000" PLC featuring (3) axes simultaneous control,15" high resolution CRT; 1.2 GB Hard drive, ergonomic industrial keyboard & mouse; 1.44MB floppy disk drive; serial ports for RS-232; all housed in a separate dust free cabinet -- Complete with:(1) 250 m³/Hr + (1) 100 m³/Hr vacuum pump; Pressure safety mats. -- Actual Model is SCMI Routech Record 125 N.

SCM ROUTECH RECORD 130 FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:4' x 10' Single Table machine: stationary extruded aluminum table is machined with a square grid pattern for fixturing parts,Grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested based machining". -- Working field:"X" axis 120" (3,048 mm), “Y"; axis 49.2"; (1,250 mm, "Z" axis stroke is 12" (305 mm). -- Positioning speed:"X" axis 260 FPM (80 MPM), "Y" axis 180 FPM (55 MPM), "Z" axis 82 FPM (25 MPM).Closed loop AC Servo drive system driving precision ground ball screws, all axes ride on extra large precision profile linear guideways. -- Boring Unit:(12) vertical spindles, (7) in "X" axis & (5) in "Y" axis;(6) Horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis. -- Machining:(1) 10 HP (7.5 kW) "Power 2000" Electro spindle w/lifetime lubrication & HSK F63 adaptor, spindle speeds from 6,000 - 18,000 RPM;(1) 12-position ATC tool plate mounted on the head for "on the fly" ATC. -- Operator & Machine Control:PC Front end with XILOG Plus + WINDOWS operating system; "NUM 1000" PLC featuring (3) axes simultaneous control,15" high resolution CRT; 1.2 GB Hard drive, ergonomic industrial keyboard & mouse; 1.44MB floppy disk drive; serial ports for RS-232; all housed in a separate dust free cabinet -- Complete with:(1) 12 HP "BECKER" vacuum pump; safety BUMP stop. -- Actual Model is SCMI ROUTECH RECORD 130-121.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6d SECO SK-20BS 20" Vertical Band Saw Specifications: Actual throat 18-1/4". Table size 22-3/4” LR x 20-1/4" FB, with 45° Tilt. Max. height under guard 12". Blade length 155", Blade width 1". Wheel speed 800 RPM. Equipped with: 3 HP - 3,450 RPM Motor. 20” Rubber-covered cast aluminum wheels. Complete with: Work light.