Cam-Wood End Matcher For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
2 Results Found
Sort By 
STANDARD LISTINGS
2019 Cam-Wood EX-300  End Matcher
$43,900

CAM-WOOD EX-300 End Matcher, 12" Performs tongue and groove, tenoning, mortising, and shaping at both ends of the boards -- Includes powered conveyors for infeed and outfeed -- Air operated hold downs keep material firmly in place during the machining process -- Cutter heads move in and out while cutting a tongue on the trailing end of one part and a groove on the leading end of the following piece.FEATURES: -- PLC controls combined with touch-sensing screen for maximum convenience of operation. -- Each cutter head is driven by a separate motor driving the spindle at 7,500 rpm spindle speed. -- Accepts unlimited wood lengths via an automated conveyor for infeed and outfeed processing. -- Cutterheads feed thru the wood is controlled by a frequency inverter that permits speed changes to suit various cutting conditions. -- Pressure plates are actuated by air cylinders. -- Hard chrome-plated table features maximum wear resistance. -- Table rollers increase feed smoothness. -- Powered in feed roller conveyor is driven by a 1 HP motor. -- 3,400 mm in feed roller conveyor and 2,200 mm out feed conveyor table are standard equipment. -- Fully enclosed chip guards. -- Air-operated clamp holds stock firmly in place. After work piece is clamped, cutter head moves in and performs shaping operation. -- The spindle is precision constructed to cut accurately -- The spindle height adjustment is displayed on a dial gauge. -- CAM-WOOD’S (2) spindle design accommodate cutterhead dia. up to 6"; -- When end matching, one spindle cuts the tongue and the second cutterhead machines the groove. SPECIFICATIONS: -- 1-1/2" To 12" width cap. -- 10-1/2” min. length cap. -- Unlimited length restriction. -- Material feed speeds up to 297 FPM; cutterhead travel speed of 79 FPM. -- (2) 5-1/2 HP Spindle motors and a 2 HP feed drive -- 1/2 HP motor for in/out cutterhead travel. -- 40 mm dia. spindle -- Requires 1300 CFM dust collection.

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cam-Wood CS-18AAT-16/EM-300  End Matcher
$82,800

CAM-WOOD CS-18AAT-16/EM-300 PUSHER TYPE CUTOFF SAW WITH 16' INFEED CAPACITY, CRAYON MARKING - Arranged to remove defects from Clear.Width & Thickness Capacity: Up to 1-1/2" x 12-1/2"Features: -- 18" Automatic Cut Off Saw equipped with automatic pusher for increased automation and efficiency -- 16' infeed table -- Works as an automatic pusher for defect removal -- PLC controlled automatic pusher device driven by servo motor at feed speeds up to 200 FPMAuto Pusher: -- Operator places crayon marks at the leading and trailing ends of a defect or waste zone -- Pusher moves the board to the first crayon marked defect, automatically completes the cutting cycle, and continues to position and chop the board at each crayon mark, thereby removing all waste zones. When the board is finished, the pusher returns to its starting position and starts on the next board -- Super Pusher travels up to 200 FPM -- Sealed, long-life ball bearings -- Precision ground cast iron table with heavy metal cabinet stands -- Easy to operate in all operations -- Saw blade comes up from beneath the table and returns after cutting for safe operation -- Totally enclosed blade guard prevents danger during cutting cycle -- Includes magnetic starters with overload protectionCutting Specifications: -- (45) Strokes/Min -- 18” Saw Blade Diameter with 1” Saw Arbor -- 10 HP Arbor Motor -- 3,200 RPM Blade Speed -- 90 PSI Compressed Air requirement with 1" Inlet -- (1) 4” Dust Hood -- Machine Size (W x L), 30" X 28-1/2" -- Automatic Transfer between Defect Saw and End MatcherCAM-WOOD EM-300 END MATCHER WITH THE FOLLOWING SPECIFICATIONS: -- Performs tongue and groove at both ends of random length boards -- Includes powered conveyors for infeed and outfeed -- Air operated hold downs keep material firmly in place during the machining process -- Cutter heads move in and out while cutting a tongue on the trailing end of one part and a groove on the leading end of the following pieceFeatures: -- PLC controls combined with touch-screen for maximum convenience of operation -- Each cutter head is powered by a separate motor driving each spindle at 7,500 RPM -- Accepts unlimited wood lengths via an automated conveyor for infeed and outfeed -- Cutterhead travel thru the wood is controlled by a frequency inverter that permits speed changes to suit various conditions. -- Pressure plates are actuated by air cylinders -- Hard chrome-plated table for maximum wear resistance -- Table rollers increase feeding smoothness -- Powered infeed roller conveyor is driven by a 1 HP motor -- 3,400 mm infeed roller conveyor and 2,200 mm outfeed conveyor tables are included -- Fully enclosed chip guards -- Air-operated clamp holds stock firmly in place. After work piece is clamped, cutter heads move in as they perform the shaping -- Spindles are precision constructed to cut accurately and smoothly -- Spindle height adjustment is displayed on a dial gauge -- CAM-WOOD’S 2-spindle design accommodates

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved