Belfab Dust Collection System For Sale

BELFAB NBM-2-10 OP Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required. -- Designed for interior use. -- Rated @ 4,600 CFM with 8.5" static pressure W.G.; (2) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 330 sq. ft. total cloth area -- Equipped with: 10HP - 1,800 RPM Hummer Blower drive centrifugal fan assembly, anti-spark cast impeller; 12" inlet dia. Wired Magnetic starter for 208/230/460/600 V. -- (2) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Additional options available.

BELFAB DW2-7.5 Modular Dust Collector. Patented Modular Technology that easily upgrades as required when you need more capacity. -- Interior use design. -- Direct drive, 7.5 HP, 3,500 CFM, centrifugal fan assembly with Anti-spark cast aluminum impeller. -- (2) Heavy Duty plastic Tilt-Trucks w/rollers for fast disposal of wood waste & chips with (2) DW filter modules. -- Tilt-Truck that easily slides out for disposal manually or by Lift Truck. -- Air-tight quick coupling plate. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.

BELFAB DW3-10 Modular Dust Collector. Patented Modular Technology that is easily upgraded as required when you need more capacity. -- Interior use design. -- (3) Heavy Duty plastic Tilt-Trucks w/rollers for fast disposal of wood waste & chips with (3) DW filter modules. -- Tilt-Trucks easily slides out for disposal manually or by Lift Truck. -- Air-tight quick coupling plate. -- Includes: 10 HP Hummer Blower with 4,600 CFM @ 1,800 RPM w/ centrifugal fan assembly with Anti-spark cast aluminum impeller. -- Wired Magnetic starter for 208/230/460 or 600 V. -- Additional options available...add other machine(s) later by adding modules and upgrading the Blower!

BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.

BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP, 3,600 RPM, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460 V. -- Additional options available

BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 20 HP, HUMMER Blower with 6,000 CFM at 1,800 RPM centrifugal fan assembly @ 7" static pressure. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags up and (5) plastic collection bags down, 175 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 460 V, 3-Ph. -- Additional options and voltages available.

BELFAB NBM4-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (4) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (4) Heavy Duty plastic tilt trucks on rollers for disposal of waste.

BELFAB DW3-15 Modular Dust Collector, Interior use design Patented Modular Technology that easily upgrades as required when you need more capacity.Specifications: -- (3) DW Filter Modules with (2) Filter bags / module measuring 24" dia. x 64" H with total filtration area / module of 70 sq. ft. -- (2) Plastic collection bags / module with 18 cu. ft. capacity. -- Unit has 14" inlet. -- Includes: 15 HP Hummer Blower with 5,000 CFM @ 1,800 RPM w/ centrifugal fan assembly with Anti-spark cast aluminum impeller. -- Wired Magnetic starter for 208/230/460/600 V. Additional options available: -- Drum Adaptor kit (includes 1 filter sleeve and 1 fixed clamp) - per filter module -- 55 gallon steel drum -- Tilt truck plastic bin (9 ft3) & adaptor (per filter module)Note: ...ideal for a Planer & Rip Saw or a Moulder!

BELFAB LW4-10 Modular Dust Collector. 10 HP, 3,600 RPM, 4,600 CFM centrifugal fan assembly @ 7" static pressure, standard blower. Specifications: -- Self-contained patented modular designed unit for interior use with direct drive -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.

BELFAB DW4-20 Modular Dust Collector. Patented Modular Technology that easily upgrades as required when you need more capacity. -- (4) DW Filter Modules w/ (2) Filter bags / module measuring 24" dia. x 64" H with total filtration area / module of 70 sq. ft. -- (2) Plastic collection bags / module with 18 cu. ft. capacity. -- Unit has 16" inlet -- Direct drive, 20 HP Hummer Blower, 6,000 CFM centrifugal fan assembly with Aluminum Anti-spark impeller. -- Includes: Wire Magnetic starter 208-230/460 V, 60 Cy, 3 Ph. Please specify at time of order Additional options available: -- Drum Adaptor kit (includes 1 filter sleeve and 1 fixed clamp) - per filter module -- 55 gallon steel drum -- Tilt truck plastic bin (9 ft3) & adaptor (per filter module)

BELFAB NBM3-15 HUMMER SERIES Dust Collector (Modular)Patented Modular Technology; 5,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Interior and exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA safety regulations, this unit has (3) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: 15 HP @ 1,800 RPM High Efficiency "Hummer" TEFC motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 14" Inlet dia. and 17" outlet dia., 495 sq/ft filter surface area. -- Control Panel & Shaker mechanism includes: (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism, all pre-wired. -- Unit comes with: (3) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.

BELFAB NBM6-30 TILT-TRUCK DUST COLLECTOR with Patented Modular Technology: Patented Modular Technology allows it to be purchased for current needs and easily upgraded as required; designed exterior use. Specification: -- Each "NBM" filter module is fitted with: (1) Service door & (2) explosion doors per NFPA safety regulations -- Rated Capacity: Rated @ 9,000 CFM with 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP Hummer blower motor, anti-spark cast aluminum impeller, 20" inlet diameter.Unit includes: -- (1) Electrical Control Panel w/Shaker Mechanism with:(1) Soft Start starter for the main blower. -- (6) NBM filter modules, each with (18) 7" x 60" poly-twill cloth filter tubes, 990 sq/ft total cloth area. w/ manual shakers. -- (54) Cu/ft waste storage cap. via (6) Heavy Duty plastic Tilt-Trucks w/rollers; each with air-tight quick coupling plate.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector.

BELFAB NBM6-30 CHIP & DUST TRANSFER DUST COLLECTOR Patented Modular Technology and heavy-duty construction for exterior use. Heavy Duty construction designed for interior or exterior use.Specifications: -- Each "NBM" filter module is fitted with; (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper. -- Rated Capacity: Rated @ 9,000 CFM @ 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP "Hummer" blower motor, anti-spark cast aluminum impeller, 20" inlet diameter. Unit Includes: -- (6) "NBM" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area w/ Continuous Dust Disposal Capacity. -- Pneumatic Chip / Dust Transfer System with (1) 7.5 HP and (1) 5 HP material handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- (1) Electrical Control Panel w/ Shaker Mechanism to include; (4) Interlock Starters; (1) Soft start for the main blower, (2) for the Pneumatic Dust Transfer System and (1) for the shaker mechanism.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector.

BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.

BELFAB DW5-15 Modular Dust Collector Patented Modular Technology that is easily upgraded as required when you need more capacity. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules. -- Interior use design -- (5) Heavy Duty plastic Tilt-Trucks w/rollers for fast disposal of wood waste & chips and (3) DW filter modules. -- Tilt-Truck that easily slides out for disposal manually or by Lift Truck. -- Air-tight quick coupling plate. -- Direct drive 15 HP, 5,000 CFM Hummer Blower centrifugal fan assembly with Anti-spark cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.

BELFAB DW5-20 Modular Dust Collector Patented Modular Technology that is easily upgraded as required when you need more capacity. This feature makes it possible to increase filtration surface cost effectively, with the introduction of additional filter modules. -- (5) DW filter modules with (2) plastic collections bags per module. -- Direct drive 20 HP HUMMER Blower, 6,000 CFM at 1,800 RPM centrifugal fan assembly with Anti-spark cast aluminum impeller. -- Includes: Wired Magnetic starter for 460 V, 3-Ph. -- Additional options available. -- PHOTO SHOWN IS WITH PLASTIC TILT TRUCK OPTION

BELFAB NBM-OP3 15 Tilt Truck Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required; designed for interior use. -- Rated @ 5,000 CFM with 10" static pressure W.G.; with Hummer 15 HP blower at 1,800 RPM, 14" inlet, anti-spark steel impeller. -- (3) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 495 sq. ft. total cloth area. -- Includes: (300) Gal. waste storage cap. via (3) Heavy Duty plastic Tilt-Trucks w/rollers, each with air-tight quick coupling plate and view portPrice includes pre-wired magnetic starter with 5' of cable

BELFAB JNBM-OP Dust Collector w/ Tilt-Truck Patented Modular Technology. Designed to collect dust particles ranging from coarse to fine.Specifications: -- Self-contained patented modular designed unit for interior use with 10 HP, 3,600 RPM and 4,500 CFM @ 7" static pressure, standard blower with 12" in-let. -- Includes: 10 HP blower, Direct drive centrifugal fan assembly and anti-spark cast aluminum impeller. -- (1) filter module with (18) twill cloth filter tubes. Filtration surface area 165 sq. ft. -- (1) Plastic Tilt-Truck Compact w/rollers for disposal by dumping manually or by Lift Truck. -- Magnetic starter with 5' of cable.

BELFAB NBM-OP4 15 Tilt Truck Modular Dust Collection SystemPatented Modular Technology, can be designed for current needs and easily upgraded as required; designed for interior use. -- Rated @ 5,000 CFM with 10" static pressure W.G.; with Hummer 15 HP blower at 1,800 RPM, 14" inlet, anti-spark steel impeller. -- (4) "NBM-OP" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes, 495 sq. ft. total cloth area. -- Includes: (300) Gal. waste storage cap. via (4) Heavy Duty plastic Tilt-Trucks w/rollers, each with air-tight quick coupling plate and view portPrice includes pre-wired magnetic starter with 5' of cable, PLEASE SPECIFY VOLTAGE

BELFAB MPJC-H8 Dust Collector - Cartridge TypeDown-flow modular; 16-Cartridges dust collector with Pulse Jet cleaning system.The H8 model use standard size cartridges, available in multiple filter media type. The filter media can be selected to meet the requirements of your process.Production processes include but are not limited to: Grinding, welding, buffing, sanding, smelting, etc…Pulse Jet Cleaning Technology:BELFAB’s MPJC- H8 collector system uses a patent pending “Tear Drop Even flow” (TDEF) pulse cleaning technology.This unique airflow distribution technology evenly forces the pulse of air through the entire length of the cartridge. The life expectancy of your cartridges will be increased by this new cleaning technology.Equipped with: -- (1) H MPJC filter section with 14" flanged inlet. Filter cartridges (16) made of 80/20 polyester, 26" L x 13-3/4" dia. Total filtration area of 3,680 sq. ft. -- System for holding the cartridges on the pivot ensuring a perfect sealing against the tray -- Explosion vent using Brixon latch conform to NFPA 68 – The vent also provides access to the hopper area (135 KST, PMax 7 Bar). -- Clean air adaptor plate for LW blower system -- Sprinkler head installed on ceiling mountIncludes: -- BELFAB'S Direct Drive Centrifugal Fan, side mounted, 20 HP TEFC premium efficiency blower with 5,000 CFM @11" wg. -- Electrical controls with NEMA 12 enclosure with 20 HP - 480V/3/60 magnetic motor starter, step-down transformer, ON / OFF buttons and built-in pulse sequence timer controller board. -- Flanged hopper to drum adaptor with drum clamps. -- One (1) 55-gal drum, trolley and support structurePHOTOHELIC SEQUENTIAL CONTROLLER OPTION ...add $ 1,200.00 -- Other Safety Options available...ask your Product Manager