Woodworking Equipment For Sale

Ripsaw XL Ripper-Smithway Machine Company s/n-710. Call 800-459-2148 for more info.

Arrow Pneumatics model; B-225-2, 230 volts, 225 scfm's, working condition

Smithway Machine Company 1940s era Gang ripsaw. XL Ripper model 208. 20 HP 3 phase with separate 1/2 feed motor. Max board with with 2 blades is 10". Currently has 2 16" carbide tipped blades installed. 1.75 arbor. Includes extra blades. Call 800-459-2148 for more info.

Engineered Flooring Line For Sale Producing specialty flooring for Japanese market. They produced about 1500 to 2000 sq ft per day with 5 employees, including the manager. Full production would be about 8-10,000 sq ft per shift, with 15 employees. The market collapsed in 2001, and the flooring line was put into storage. Call 800-459-2148 for more info.

1945 American Sawmill Machinery Co Monarch 24" Planer. Power - direct drive 5 HP. Restored and refurbished. Very little original use at Old Pioneer Sawmill. Call 800-459-2148 for more info.

---In Auction---NO RESERVE--- 2-Spindle Vertical Boring Machine Equipped with: - 1 HP - 3,400 RPM Motor. Complete with: - "30C-W20” 2-Spindle Boring Head, with Maximum bit cap. 15 mm (0.59”), Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/BV-230384/event/A051324$1

---In Auction---NO RESERVE---Fair Condition--- 7' Stroke Sander Specifications: - Table size 19” x 73-1/4” x 24” H, with 19-3/4” x 73-1/4” x 3/4” Thick Wood top. - Manual table stroke 26-3/4". Equipped with: - 7” W x 84” Face Sanding belt, with 3 HP - 1,140 RPM Motor. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SS-230670/event/A051324$1

---In Auction---Good Condition--- 24" 2-Head Wide Belt Sander Specifications: - Thickness cap. 0" - 5". Equipped with: - 1st Head: 5” Dia. Grooved rubber-covered contact roll, with 15 HP - 1,740 RPM Motor. - 2nd Head: 3” Dia. Grooved rubber-covered & 3” Dia. Smooth steel contact rolls, with Finishing platen, & 15 HP - 1,740 RPM Motor. - 1-1/2” Dia. Spring-loaded rubber-covered infeed & outfeed pinch rolls, (1) In front of 1st head, (1) In between heads, & (2) Pair after 2nd head. - 23-1/4” W x 3-1/2’ L Feed belt, with 2 HP - 1,720 RPM Motor. Control, with Motor load meters. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SX-230385/event/A051324$1

Planer helical knives, for Northfield 240 double surfacer planer. Complete set. Make an offer! Call 800-459-2148 for more info.

30" Planer. Older model, Good for rough jobs. Call 800-459-2148 for more info.

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze. -- The Floating feed system is user friendly and easy to set up. -- The Spindle can be adjusted from Horizontal to 52° to insure the proper cut on the parts you need!

US CONCEPTS FAS-HD "Arch Type" Shaper;Specifications: -- Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

US - CONCEPTS - FAS 100, ... Arch Moulding ShaperSpecifications: -- Table size: 28" x 46" x 34" H . -- Spindle dia.: 1-1/4". -- Spindle speed: 6,500 RPM. -- Max. cutting width: 4"; max. cutter dia.: 6-1/2".Equipped with & Features: -- 7.5 HP Spindle motor, 0.5 HP variable speed DC feed motor. -- Mobile base with (4) Swivel casters.Dimensions: 50" x 32" x 60" H.

75 HP 550 Volt 3 phase

Vac-U-Clamp FT900 Thermafoil mPress Brand new - Seller never used it!

Vac-U-Clamp FT800+ Thermofoil Press 52" x 105" Work area Dispenser Rack (3) Vac bags new in boxes still

ADVANCE MANUFACTURING VACUMIZER M-100 Vacuum CoaterModel M-100 Vacuumizer Continuous Feed Thru Vacuum Finisher, -- 71/2 Hp Vacuum Pump, Capacity : 2" X 6" openingNote: Transformer for 600 volts included

Convert your Edgebander from its standard Glue Pot system to PUR Slot Die Extrusion system usingVALCO MELTON'S HOT MELT/PUR EXTRUSION SYSTEM With up to 60 mm wide Glue Line Coverage The "IsoMelt Mini" melting tank is used for this proposal, it will be able to melt and pump around 10 Lbs of adhesive per hour. The IsoMelt Mini has a completely enclosed reservoir, which seals off the PUR from moisture in the atmosphere. To ensure that no moisture enters the reservoir, there is a small PLC program that injects dry air on a timed basis into the reservoir. The external MCP-6 pattern controller will process the photo-eye input and encoder signal measuring the machine speed. The pump will deliver adhesive to the head. A sensor mounted upstream from the applicator head will "see" the edge of the board coming through the system and triggers the valve to fire at the appropriate time and shut off at the appropriate time, ensuring that glue is accurately placed. An encoder is included for the speed feedback necessary for precise pattern placement. The head itself will need to be mounted in place of your current glue pot.Should you decide to go with this solution, we will provide you with drawings of the mount to make sure there are no issues with the fit before we take your machine down for the install.Also to expedite frequent changeover of part thickness and the importance of machine up-time, this proposal includes the motorized part thickness adjustment. It eliminates the need for operators to adjust the coating width on each setup.Components Required:1 946XX052 IsoMelt Mini, 4 cc/rev pump, 53 Lbs (24kG)/Hr, 2 exit NI1201 968XX167 Clearcut 60 edgebanding head (adjustable up to 60 mm wide)1 N/A Motorized option for edgebanding head including. . . 988xx894 controller, 912xx860 cable kit, 912xx027 unit communication cable1 988XM859 Uni-Flow Pneumatic Control for IsoMelt Mini1 913XX876 NV-10A level sensor board1 913XX513 Level sensor M30X1,51 780XX149 Heated hose, 2300/3000 Series,1/2-inch X 16-ft, 240 V1 074XX056 MCP-6 pattern control1 155XX341 1000 Pulse Encoder Kit (rigid encoder bracket)1 029XX511 Encoder splitter, Y-adapter to D series hot melt unit1 030XX632 Encoder cable, 8 m, 8-pin DIN1 280XX256 Fixed-field sensor, 4-inch (100-mm) range, with 581XX484 mounting bracket1 030XX596 Scanner cable, 10 m, flying leads 1 030XX882 Valve cable, 10 m, female reverse key to flying leads1 799XX716 Tank fittings kit, qty 2, straight #8 hose core1 799XX713 Tank fittings kit, qty 2, 45-degree #8 hose core 10 795XX550 InsulationPrice is for all of the items required to convert your Edgebander to an efficient PUR machine. Labor prices not included.

The Vantec 2800mm Spindleless Veneer Lathe is designed to process veneer for plywood production from both hard and soft logs. Its metal tempered grooved rollers and lathe knife inclination system work perfectly to make sure there will always be a precise contact area between the lathe knife and the log during the peeling process by eliminating vibration that could cause damage to the Veneer sheets. Vantec Spindleless lathe proves its efficiency by delivering consistent thickness variation and a impressive top linear speed of 180 m/ min throughout the peeling process for face or core veneers with smooth surfaces. - Log diameter up to 600 mm; - Max log length: 2750 mm; - Min log Length: 2300mm; (with stacker) - Min log length:1800mm (no stacker); - Veneer thickness: 1.0 to 4.0 mm; (Pine and eucalyptus); - Log core after peeling: 40 to 45mm; - Maximum linear speed 180 m/min; - Drive panel included; - Each motor is individually connected by a Variable Speed Drive for torque control in two points of traction on the rollers to pre- vent excessive load on tip ends; - Log Central aligner with maximum of 2200 mm of movement; - Pneumatic scriber Knives (02 fitted on the sides to cut in width and 01 in the Center to cut the length); - Width: 7640 mm; - Length: 3400 mm; - Height: 2550 mm; - Approximate weight: 14000 kg.