• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
31 Results Found for Gang Saw Viewing 1 - 20 of 31 results
RECENTLY ADDED
STANDARD LISTINGS
A & S MACHINERY 5X5-V AUTOMATIC V-GROOVER: -- Specifications: (1) Spindle with 10 HP - 3,450 RPM motor, 12" dia blade, 110" (9') long cut cap., material thickness .25" - 1.25",;Motorized travel via 3 HP hydraulic motor with variable feed rate; pneumatic material hold-down clamp. -- Complete with:Cutter guard, swing arm control panel, back fence; 6" dia. dust chute,Requires 1,200 CFM dust collection, and 100 PSI compressed air (3 CFM). -- Options Include:An assortment of Diamond V-Groove Cutter Heads. -- Actual Model is A & S 5X5-V
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AUTO-V-GROOVE AVG-48 MFT UNIVERSAL V-GROOVER: -- Specifications:(1) Head Automatic Cross & Linear V-Groover, 48" max. material width on cross-groove, unlimited length for linear grooving, 1-1/4" max. material thickness.10 HP - 3,600 RPM Motor, 30 mm dia. belt driven precision cutter arbor, 3-1/4" max. cutter width. 2 HP Hydraulic feed motor for infinitely variable crosscut feed speed from 0 - 50 FPM & 0 - 60 FPM for linear feeding. -- Complete with:Heavy Duty double belt feeder assembly for linear grooving & adjustable pneumatic material hold-down bar;(1) 84" x 24" main table, (1) 20" x 58" auxiliary table, (1) large 96" long floating table on rails.Automatic Tape Applicator with 12" max. dia roll & manual quick crank tape applicator positioning system -- Actual Model is AUTO-V-GROOVE AVG-48-M/FT. -- NOTE: The JET dust collector pictured is NOT included with the machine.
Equipment Location:MIDWEST
Bob Bullin
800-374-5009 ext:346

2018 Jocar 160F Gang Saw

Call for Price
Slab gangs are designed to process 3 sided slabs into pallet boards. Ten (10) vertical, interior feed rolls are standard. Variable speed feed system up to 175 FPM. 2" automatic cant variance allows both 3 1/2" and 5 1/2" wide cants to be run back to back with no operator involvement or machine adjustments. Machine utilizes one bottom "clean-up" saw to eliminate irregular shaped pieces assuring flat, square pallet boards. 30" to 60" lengths. Can be partnered with a slab edger and trimmer to recover boards with NO operators.
Equipment Location:Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
LAUDERDALE-HAMILTON DOUBLE TRIM SAW: -- Specifications:Minimum distance between the saws 60" (1,524 mm), maximum distance between the saws 109" (2,768 mm);Panels are fed into (2) 5 HP (3.7 kW) Saw motors with 10" (254 mm) dia. saw blades.The output of the saw is approx 600 parts per hour. -- Feed Speed;The standard link feed chain speed is approx 120 FPM (37 MPM) per cycle;The chain stops at the end of each cycle which requires the operator to push the "go" button to start a new cycle each time. -- Saw Adjustments:LH Saw is fix & the RH saw is motorized & moves along precision round guideways to assure for accurate placement.The system allows you to cut approx 6" (152 mm) off the adjustable RH side if the machine;The fixed LH side of the machine is designed for just a squaring dust cut but you can also take off up to 6" (152 mm) if needed. -- Complete with:Powered scrap conveyor on RH (operator) side; machine risers; (2) operating platform; powered in-feed & out-feed conveyors; (2) scissor lifts. remote pendent & emergency stops at the in-feed & out-feed side of the machine.
Equipment Location:MIDWEST
Bob Bullin
800-374-5009 ext:346
LAUDERDALE-HAMILTON RFPR 72/12 "HEAVY DUTY" MULTI-BLADE PANEL SAWSpecifications -- (1) 50 HP main arbor motor for 1/8" min. - 2" max. material thickness; 12" Dia max. blade capacity with 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers with (8) Polyurethane drive rollers; variable feed speed to max 80 FPM. -- (1) "Quick Change" arbor cart trolley and blade box for 9 1/2" cutsOn average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.Available Options: -- Blade Box Arbor Cart and Trolley $ 12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $ 700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $ 3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $ 14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $ 16,390.00 eachTooling Cost: -- Carbide Tip Blades 12" x 40T x 4 3/16 bore with TCG and 3 pin holes $ 125.00 each -- Saw Blade Tooling Collars $ 125.00 each -- Actual Model is LAUDERDALE-HAMILTON RFPR "HEAVY DUTY" 12 Panel Rip Saw
Equipment Location:SOUTH
Bob Bullin
800-374-5009 ext:346

Pendu Mfg M-4000 Gang Saw

Call for Price
Pendu Double Arbor Gang Model M4000, 1999, Rebuilt, S/N 77026R99
Equipment Location:Hopkinsville, KY
Kittrell Sawmill Brokers and Appraisers
931-797-6284

Pendu Mfg Gang Saw

Call for Price
Extra blades, spacers and log home tooling
Equipment Location:Central City, KY
West Kentucky Sawmill Equipment
270-820-8449
LAUDERDALE-HAMILTON 96" x 60" ANGULAR TYPE RIP & CROSS-CUT SYSTEM: -- Specifications:Automatic Angular Rip & Crosscut 5-Position System; max. panel size of 8' (96") long x 5' (60") wide x 1" - 4" thick; 1.25" minimum spacing between the blades; variable feed speed from 0 - 150 FPM. This system will process a unit of material in approx. (7) Min. -- Pos. # 1: LHI Automatic Staging/Infeed/Transfer & Panel Rake Feeding System: 10' (120") Long, powered 3-chain staging conveyor; (2) units can be preloaded while (1) unit is in process. Automatic up-indexing 4,500 Lbs capacity Scissors Lift with auto. rake infeed system; infeed rake system designed with a thin material device that can automatically load material as thin a 1/8". -- Pos. # 2: LHI "72": 72" Arbor length designed for panels up to max. of 5' (60") wide, min. panel length 30"; 40 HP main arbor motor; 1/8" min. - 1" max. material thickness with no adjustment needed over a 3/8" thickness variation. 2-3/4" Dia. arbor with 1-15/16" "Fafnir" arbor bearings; positive non-marking steel contact feed rollers with (optional) poly-covering, driven from top & bottom. Includes: (6) blade collars; (2) 6" dia. vertical dust outlets with an easy access strip separator box. -- Pos. # 3: LHI Cross-Transfer System: Transfer conveyor with panel holddown & chain drive system to change direction 90° & automatically feed LHI 102". -- Pos. # 4: LHI "102": 102" Arbor length designed for panels up to max. 8' (96") long; 30 HP main arbor motor; 1/8" min. - 1" max. material thickness with no adjustment needed over a 3/8" thickness variation; 2-3/4" dia. arbor with 1-15/16" "Fafnir" arbor bearings. Positive non-marking steel contact feed rollers with (optional) poly-covering, driven from top & bottom. Includes: (6) blade collars; (2) 6" dia vertical dust outlets with an easy access strip separator box. -- Pos. # 5: LHI Stacking & Outfeed Transfer System: Auto. down-indexing 4,500 Lbs cap. Scissor Lift; (4) adjustable alignment posts & (4) bin separators to keep processed stacks square. 98' (96") Long outfeed gravity conveyor.Operating System: -- (1) LHI ALLEN-BRADLEY "Inter-Link" PLC for simple single-operator management of the entire system from (1) central control.
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
LAUDERDALE-HAMILTON RFPR-72/10 MULTI-BLADE PANEL SAW: -- Specifications:40 HP main arbor motor; 1/8" min. - 1-1/4" max. material thickness; 10" dia blade with 1.25" minimum spacing between the blades; 3-15/16" dia. arbor with 72" of usable width cutting capacity, min. panel length 30"; 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers; fixed feed speed of 80 FPM. -- Blades & collars:Thin kerf 10" dia x 40-tooth x 4.18" bore non-split blades with quick & easy setup for fast blade positioning/removal (blades not included). -- Blades & collars are sold separately & not included in the machine price; 10" dia. x 40-tooth thin kerf blades, please add ...$ 100 ea.;1.25" wide x 4.18" bore blade collars, add ...$ 125 each. -- Complete with:(2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM -- Actual Model is LHI RFPR-72/10 Roll Feed Panel Saw. -- Available Options at additional cost:110 V Infeed Scissor Lift with foot pedal controls or automatic up-indexing; 110 V Outfeed Scissor Lift with automatic down-indexing;Assortment of blade thicknesses & diameters; Split blade & collar system; -- Additional Options Depending on application:Main motor power from 30 - 75 HP; 4" Max. cutting height (requires 75 HP motor);Variable feed speed; Non-marking Polyurethane contact feed rollers;Additional arbors; "QUICK CHANGE" arbor system (see video);"Pigtail" quick change Crosscut Saw System.Many more tooling & configuration options available upon requestThis machine will cut a bundle (42 sheets) of 3/4" Plywood. PB, MDF or OSB into narrow strips in 4 minutes or less.
Equipment Location:SOUTH
Bob Bullin
800-374-5009 ext:346
LAUDERDALE-HAMILTON RFPR 72/10 MULTI-BLADE PANEL SAW: -- Specifications:Simple Design, Low Cost, High Performance Just like our other equipment High Production… One person can rip a bundle in 3-1/2 minutes, Off-The-Shelf Parts So you can keep it running years from now For custom order with the following available options & features. ( and ). -- Available Options:30HP to 75HP 230V/460V/3PH Saw motor -- Standard arbor size is 3-15/16" diameter x 72" long with 1-15/16" precision bearings. Special arbor lengths available up to 108". -- 8 Steel feed rollers are driven top and bottom, giving positive, non-marking feed and long roller life (optional polyurethane rollers are available) -- Fixed feed speeds from 20-150fpm. 79fpm standard. Variable speed feed is available. -- Uses 10" diameter 4-3/16" bore blades. -- Rip 1/8" to 1-1/4" thick with 10" diameter blades. (Custom builds available with 12" and 14" diameter blades allow ripping of material up to 3-3/4" thick. -- Foot print: 40" x 96"; Working height: 47-1/4"; Dust ports: 4"(2x), 8"(1x) -- Blades mount to arbor using precision collars which allow setup changes of 10-15minutes. -- Optional: Arbor change out carts allow setup changes in 4 minutes -- In-feed & Out-feed Stations -- Pig Tail Cross-Cut Saw -- Available Tooling:Blades & collars are sold separately & not included in the machine price; -- 10" dia x 4-3/16" bore 40 Tooth thin kerf blades = $100 ea., -- 1-1/4" wide x 4-3/16" bore blade collars = $120 ea. -- This machine will cut a bundle (42 sheets) of 3/4" plywood. PB, MDF or OSB into narrow strips in 4 minutes or less. -- Actual Model is LAUDERDALE-HAMILTON RFPR 72/10 Roll Feed Panel Saw.
Equipment Location:SOUTH
Bob Bullin
800-374-5009 ext:346
LAUDERDALE-HAMILTON RFPR 102/10 MULTI-BLADE PANEL SAW: -- Specifications:(1) 40 HP main arbor motor for 1/8" min. - 4-1/4" max. material thickness; 12" Dia max. blade capacity; 1.25" minimum spacing between the blades; Minimum panel length 30" & 72" of usable width cutting capacity. -- 3-15/16" Dia. arbor with 1-15/16" FAFNIR arbor bearings; positive powered steel contact feed rollers with (8) Polyurethane drive rollers; fixed feed speed of 80 FPM. -- Includes (6) arbor collars - blades not included. -- Complete with: (2) 4" dia dust collection ports on top and (1) 8" dust collection port on bottom. Total recommended 2,200 CFM.On average this machine will cut a bundle (42 sheets) of 3/4" Plywood. LVL, PB, MDF or OSB into narrow strips in 4 minutes or less.Available Options: -- Blade Box Arbor Cart and Trolley $ 12,590.00 each -- Arbor Carts modifications to accept 12" dia. blades $ 700.00 each -- Single Point Height Adjustment $ 6,000.00 each -- "Quick Change" set up kit (includes belt guide, belt tensioner, and hydraulic arbor lock) $ 3,695.00 each -- Tandem 8000# capacity infeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt, 31" x 192" platform and cross bars for fork truck entry $ 14,495.00 each -- Tandem 8000# capacity outfeed Scissors Lift, 2 HP, 3 Phase, 230/460 Volt with 48" x 192" platform and beveled crossbars for fork truck entry and auto down indexing $ 16,390.00 each -- Drag Chain Feeder Conveyor - Roller conveyor transfers sheets to in-feed of saw and dog chains align and start the sheets into the saw feed rolls. Recommended with 102" wide machines, $ 18,800 Tooling Cost: -- Carbide Tip Blades 10" dia. x 40-tooth thin kerf blades $ 125.00 each -- Saw Blade Tooling Collars $ 125.00 eachThis machine will cut a bundle (42 sheets) of 3/4" Plywood. PB, MDF or OSB into narrow strips in 4 minutes or less.Actual Model is LAUDERDALE-HAMILTON RFPR 102/10
Equipment Location:SOUTH, AL
EX-FACTORY INC.
704-841-2001
Ligna 8" Gang Saw, Extra saws and spacers, $18,000
Equipment Location:Chelsea, AL
Abneyco Equipment LLC
706-590-3624
Product No. 4401 Arbor space 24" Thickness to 3.5" using 14" dia. tooling 75-HP 3600 RPM TEFC direct arbor drive 3-HP TEFC HD variable speed feed drive assembly with 30-150 FPM rate (4) 3" dia. air loaded overhead idle press rolls (1) 24" capacity sleeve arranged for 3-1/8" bore, 14" max. dia. tooling (1) set of saw spacers (2) upper dust hoods - (1) 10" and (1) 5" (requires total 3,380 CFM at 5,000 FPM velocity with 4" water gauge at hood opening Lower dust chute Anti-kickback assemblies single bottom and double upper infeed, and single upper outfeed Arranged for 3/60/460v power supply PRICE: $37500 Machine Type: Rip Saw / Gangrip Manufacturer: Mereen Johnson Model: 424 DC Year: 1993 Machine Location: Great Lakes
Equipment Location:Great Lakes
Keith Comeau
704-929-9122
MULTISCORE CD-4-30 Cabinet Groover/Bead/Multi-Blade Saw. Overall Specs: 30" Wide x 50" long max. cap., 1" max. material thickness; 30 HP main motor, 3-15/16" dia. arbor @ 3,500 RPM, aluminum bed plate slotted at 1.5" spacing for about (20) tool positions, quick release tensioner on the arbor drive belts. -- Equipped with: Feed system consists of a reciprocating push fence with wood extension fingers to assure consistently square cuts; push fence carries the part thru the entire cutting area completely past the arbor. Extension fingers are laterally adjustable for different cut widths. Pneumatic infeed plastic holdover fence laterally adj. to hold parts up against the fence. (8) Hold down arms with lat. & vert. adj. mount to 'T' slot rack to press parts against the feed table during machining. -- Feed Drive/Speed: 2 HP - 1,750 RPM AC Inverter Variable feed motor via gearmotor, with dynamic brake, 0 - 60 FPM. -- Features: Material is pushed off the exit side while machine operator can load new parts at the infeed table. Cutterhead assembly is end supported, adjustable up & down via handwheel, and jam-nut tooling locking system. -- Includes: Mounted (16) Split Multi Bead Cutters, 8" x 12T with mounting hubs included. 10" Dia. pipe requires approx. 3,000 CFM dust collection, 80 PSI compressed air supply.
Equipment Location:MID ATLANTIC
Bob Bullin
800-374-5009 ext:346
MULTISCORE MR-23 "HEAVY DUTY" MULTI-BLADE PANEL SAW: -- Specifications:62" Cap., 75 HP - 3,500 RPM, 3.97" dia. arbor; Blade collars are fully adjustable with 2.25" min. spacing & 1.5" max. depth of cut.Includes air lifting of arbor motor and quick release arbor bearings for speedy arbor/blade change-overs. -- Feed system:((1) 1.5 HP - 1,750 RPM feed motor with variable feed speed 50 to 150 FPM.(1) set of continuous powered rubber coated in-feed & out-feed roller shafts; (1) Continuous overhead hold-down pressure roller assembly in saw blade area,All feed roller shafts are chain driven with air tensioning in lieu of troublesome springs. -- Complete with: 10" Dia. dust collection outlet plenum (3,000 CFM required). -- Options Include:(19) blades, (19) collars & (14) aluminum throat plates as pictured. -- Actual Model is Multiscore MR 23 62
Equipment Location:SOUTHEAST
Bob Bullin
800-374-5009 ext:346
MULTISCORE MR-21-62 MULTI-BLADE PANEL SAW: -- Specifications:62" Width Cap., 60 HP - 3,500 RPM belt driven bottom mounted arbor, 3-15/16" dia. arbor.Manual vertical adjustment for up to 1-1/2" max. depth of cut, blade collars are fully adjustable with 2.25" min. spacing. -- Feed system:Adjustable powered in-feed top & bottom urethane covered hold-down feed rollers,Adjustable powered out-feed top & bottom urethane covered hold-down feed rollers,Adjustable powered overhead hold-down pressure wheel assembly in saw blade area.All feed wheels are chain driven with air tensioning. -- Feed Speed: 2 HP - 1,750 RPM feed motor, variable feed speed 20 to 100 FPM; -- Complete with:(2) 10" Dia. dust collection outlet (3,000 CFM required). -- Options Include:Some used blades, (17) blade collars & (17) aluminum throat plates. -- Actual Model is MULTISCORE MR-21-62
Equipment Location:MIDWEST
Bob Bullin
800-374-5009 ext:346
PROFILEMATIC V-1003 MULTI-HEAD LINEAR V-GROOVER: -- Specifications:Automatic Feed Through Machine for V-grooving solid surface and wood materials. -- (1) 10 HP Shaper head w/TEFC (Totally Enclosed Fan Cooled) AC motor driving a Precision spindle with a 1.5" dia. shaft, rated at 7,000 RPM spindle speed. -- Rides on a Precision linear bearing profile guideway for Y-Axis movement. Shaper tooling can be stacked up to (5) tools high (differing profiles) then adjusted for height to utilize the individual tool needed for the product being run. Equipped with a Heavy Duty cutter guard with a 4" dia. dust outlet. -- (1) Top & (1) Bottom V-grooving head, each with 7.5 HP TEFC motor, with 1.5" dia. shaft and 4" dust collection outlets. -- Each head mounted on dovetail slide column for up-and-down depth adjustment (Z-axis) & THK linear bearing slides for in-and-out adjustment (Y-axis); travels with air cylinder & adjustable stop. - Depth control of V-groove with PROSCALE LED readout, approx. 6" in-and-out (Y-axis). -- 3" Wide air activated Top & Bottom automatic tape applicator with automatic cutoff. -- 1/4" to 1-1/8" Material thickness, board width from 4" min. and no max. width restrictions, min. board length 12", and approx. 6" max. cut depth from edge panel. -- 6" Wide top & bottom driven feed chains with Non-marking rubber pad inserts traveling on hardened and precision ground .625" dia. rods.; 1.5 HP AC Variable speed drive, feed rate from 5 - 40 FPM. -- Complete with: ALLEN BRADLE "Panel View 300" YPLC Control, adjustable infeed fence system, infeed & outfeed front table supports and side table with roller-ball surface, controls, safety guards & cutterguards, (3) dust hoods 4" dia. - Made in USA. -- Machine includes tooling.
Equipment Location:NORTHEAST
Bob Bullin
800-374-5009 ext:346
PROFILEMATIC V-1003 MULTI-HEAD LINEAR V-GROOVER: -- Specifications:Automatic feed through machine for V-grooving solid surface and wood materials.;1/4" - 1-1/8" Material thickness, board width from 4" min., and no max. width restrictions, min. board length 12", approx. 6" max. cut depth from edge panel. -- Feed System(2) 1.5 HP Top & Bottom variable speed drive motors, 6" wide non-marking rubber pad inserts traveling on hardened ground 0.625" dia. rods; feed rate from 5 - 40 FPMMachine Configuration: -- 1st Head:(1) 10 HP Shaper head w/TEFC (Totally Enclosed, Fan Cooled) AC motor driving a Precision spindle with a 3.625" long x 1.50" dia. shaft, rated at 3,450 RPM spindle speed.Shaper Head rides on adjustable profile guideways for "Y" & "Z" axis movement;Shaper tooling can be stacked up to (5) tools high (all differing profiles) then adjusted for height to utilize the individual tool needed for the product being run;Shaper head equipped with a Heavy Duty cutter guard with a 4" dia. dust outlet. -- 2nd Head:1) Adjustable V-grooving head with 7.5 HP, 3,450 RPM TEFC motor;1.50" Dia. shaft and 4" dust collection outlet; head is mounted on dovetail slide column for up-and-down depth adjustment ("Z" axis) & adjustable profile guideways for in-and-out adjustment ("Y" axis). -- 3rd Head:(1) Adjustable Bottom mounted rip saw with 7.5 HP, 3,450 RPM TEFC motor;1.50" Dia. shaft and 4" dust collection outlet, used for counter top back splash or can be used for additional v-grooving -- Complete with:Adjustable infeed fence system; 3" Wide air activated automatic tape applicator with automatic cutoff; Elevated control panel with Allen Bradley "PanelView 300" PLC; safety & cutter guards. -- Options Include:(1) In-feed roller table; (1) Side support table which includes operating unit "3rd Head"; Tooling as pictured. -- Actual Model is PROFILEMATIC V-1003
Equipment Location:WEST COAST
Bob Bullin
800-374-5009 ext:346

Schurman 8x60 Gang Saw

Call for Price
SCHURMAN SINGLE ARBOR GANG SAW 8" x 60"
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351

Schurman 65BA42 Gang Saw

Call for Price
Schurman Mdl# 65B42 6" x 42" Splinned Btm Arbor Gang Edger; W/2 300HP, Hands off Infeed, Outfeed Rollcase W/ Controls S/N 2633 & Cab
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351