Torit Dust Collection System For Sale
17 Results Found
DONALDSON TORIT ECB 1 Environmental Control Module Rated at 4,500 CFM @ 3.3:1 Air-To-Cloth ratio with a 5 HP blower / motor. -- Cloth area 1,356 Sq. Ft. from (6) cartridge filters (used) with louvered doors. -- Unit includes: Reverse pulse jet cleaning, motor starter, pulse control timer board and pressure gage. -- (6) New AirMax Premium Media Cartridge Filters - fire retardant. -- Motor starter and disconnect. -- Great for removing fine airborne dust from multiple sources. Recirculates clean air, eliminating the need for costly make-up air and requires no ductwork. -- Modular, compact design permits proper sizing for each application. -- Installation , Operation, Maintenance Manuals included -- Unit is reconditioned with a (6) month mechanical warranty.
Call for Price
TORIT TJ 1080-155 Rectangular baghouse with Rotary Airlock. Max. cap. of 11,000 CFM @ 10:1 air to cloth ratio, 1,100 sq. ft. of filter media from (117) filtration bags.General Specs/Data: -- Filter cleaning: Continuous cleaning of filtration media from a solenoid operating diaphram valve introducing jets of reverse high pressure air into each row of filter tubes in sequential order; this primary air, as well as secondary air, pulse cleans each row of filter bags while the remaining tubes continue filtering operations. -- Comes with: Cone bottom of baghouse connected to a TORIT 16 AN Rotary Air Lock. Structural steel platform elevated to 12' for waste bin access and service catwalk -- Includes: (1) 10 HP and (1) 15 HP blower. Electrical controls switches. Piping and shut off gates. Extra filter cages.Actual model is TJ 1080-155.
Call for Price
TORIT DONALDSON DFO-4-16 Cartridge Dust CollectorApprox. 9,100 CFM @ 11.5" S.P.; Filter Cartridge System complete with (16) cylindrical cartridges (226 sq. ft. cloth area per cartridge), 3:1 air-to-cloth ratio, Total filter area 3,040 sq. ft.. -- Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges. Heavy Duty steel legs position unit approximately 4' above the ground. -- Includes: 20 HP top-mounted fan motor, control panel with 3-Ph motor starter and pulse cleaning controls. Extra ducting included for easy hook-up to a plasma table.
TORIT CLASSIC 5 HP Dual 16" Cyclone Dust Collector;Approx. 36" L x 60" W x 120" H on legs. -- 6" Diameter inlet, 8" diameter outlet; -- 5 HP - 3,450 RPM fan motor. -- Includes after filter assembly consisting of at least one bag with 25 sq. ft. of filter area.
Call for Price
TORIT DDHV-45 Down Draft Sanding Table48" x 60" Aluminum table with 17-1/2 sq. ft. of grate opening, steel body construction, rated at 4,800 CFM, 10 HP - 3,600 RPM motor w/fan housed in sound absorbent compartment. -- Fully self-contained unit - no duct work, no loss of conditioned air; working height 36". -- Foot shaker pedals w/ cleaned, previously used envelope type filters with 255 sq. ft. of fabric filter media (removes up to 99.7% of particles as fine as 1 micron). -- (2) pullout drawers collect dust. -- Max. weight load limit of 1,000 Lbs.
DONALDSON-TORIT 96 HPT Baghouse Dust Collection System with Rotary Air Lock (RAL). Second Enclosure unit is a heavy dust primary separation unit with separate RAL. -- Currently both units installed wiht a gravity discharge from their RAL to a common waster collection container with a levelling auger running across, below the two RAL's.Filter Unit: -- Fan: Air handling blower powered by a belt-driven TEFC motor both mounted on platform. Blower with 30" Diameter Inlet & 23" x 26" Outlet. -- Specifications: Contains (96) oval 16 oz. filter bags that are 96" long, having 9.95 sq. ft each. for a total of 955 square ft of effective filter area. Allows 9,600 - 17,000 CFM depending on application and fan provided.Media Cleaning: POWER-FLO's 'Super Sonic Nozzles - converging-diverging' design with High Pressure Pulse Jet allows much higher Air-to-Cloth Ratio. High entry inlet adds to high efficiency. Oval bags. Heavy duty tubesheet is 1/4" thick. Top access filter maintenance on clean air side. -- Discharge: Thru a TORIT approx 16" Rotary Air LockSecondary unit: -- Fan: Material Handling Radial Bladed CINCINNATI FAN "RBE-19" 40 HP Belt-driven blower, S/N 7029H, with pproximately 16" Inlet & Approximately 14" x 26" Outlet. -- Discharge: Thru a TORIT approx 16" Rotary Air Lock
Call for Price
DONALDSON TORIT Model 'DF0 4-32' DOWNFLO OVAL CARTRIDGE Dust Collector. --Specifications:16,250 approx. CFM. Filter Cartridge System complete with capacity for (32) oval cylindrical cartridges (254 sq. ft. cloth area per cartridge) total 8,125 sq. ft. of filter area (Ultra-Web); when set up to operate at 2:1 air-to-cloth ratio. --Features:Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges. Heavy Duty steel legs position unit approximately 48" above the ground. Includes (2) manual slide gates dust discharging to barrels or waste bins (not included). -- Includes:40 HP Ground-mounted TEFC motor/fan package, Control Panel with 3-Ph motor starters and pulse cleaning controls..
DONALDSON-TORIT 3 DF-24 DOWNFLO 24-Cartridge Dust Collector. -- Specifications: 8,100 CFM approx. Filter Cartridge System complete with (24) cylindrical cartridges (226 sq. ft. cloth area per cartridge (cylindrical cartridges) for a total 5.424 sq.ft. of filter area; operating at 1.5:1 air-to-cloth ratio. -- Comes with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges; Sequencing Timer in an enclosure.; (2) Discharge Cones, Heavy Duty steel legs to position unit approximately 60"' above the ground, providing sufficient clearance for (2) Hopper Outlets with manual slide gate closures. -- Equipped with: (2) Clean Air Blowers each driven 20 HP TEFC motors. Top-mounted direct drive blowers. -- (2) AN12 TORIT Rotary Air Locks, 24 RPM. -- Dimensions: 144" x 106" x 156" H
Call for Price
TORIT 376RF12/CARTER DAY RJ Hybrid Dust Collection System with Rotary Air Lock & Transfer blower. -- General Data: Filter capacity 40,000 CFM @ 8:1 Air-to-cloth ratio, approx 140" dia. round baghouse with (324) filter bags of 12' length (oval bags provide for radial movement of bag during cleaning for longer life), total 5,054 sq. ft. filter area. -- Filter Cleaning: Filtration media cleaning via 7.5 HP medium pressure air pump (eliminates the need for compressed air which can be susceptible to condensation and freezing); 36" x 65" return air outlet and approx. 42" x 42" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 0.33 HP motor, (1) NEMA-9 solenoid and diaphragm valve which rotates over the bag openings, walk-in plenum for bag access/maintenance. Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed; walk-in acess door at top of ladder.. -- Complete with: Structural steel support, maintenance platform, caged ladder, bolt-on involute arm, explosion doors. -- Comes with: CSM 85HD Material Handling Blower with 150 HP TEFC motor with VFD drive currently setup for approx. 29,500 CFM @ 18" SP. Fan inlet is 37" dia.. Approx 24" Rotary Air Lock (RAL) at the bottom of the 60° hopper, ductwork from blower to baghouse. Transfer blower at discharge of RAL. -- Features: Fire Damper installed at outlet of baghouse for safety in case of fire., On roof level is a Summer/Winter diverter which is electrically operated. Inside building there is a perforated header pipe for sound/air dispersion. -- Includes: Explosion doors, exterior piping and YASKAWA Variable Frequency Drive (VFD) for 150 HP on main fan motor. -- Unit includes a new (never installed) set of filter bags. -- Originally built in 1997 but overhauled in 2007 and is in very good condition.NOTE 1: This hybrid unit is made up of a bottom section from a CARTER DAY RJ and top section of a DONALDSON/TORIT 376FR12. The RJ unit was slightly smaller in diameter hence the number of filters and area is slightly reduced fro (376) to (324). This composite unit is transparent and operates the same as a 376RF12 described above. The TORIT representative model number is 324RF12.NOTE 2: The unit for sale on this record is pictured along the wall on the right side.
TORIT DFT 3-12 Cartridge Dust CollectorCartridge style downward flow dust collector rated at 6,000 CFM. -- Equipped with: -- 15 HP, top mounted, direct drive blower rated at 6,000 CFM. -- Holds (12) AirMax Premium Media Cartridge Filters - fire retardant and with 3,048 sq. ft. of filter media. Air-to-Media ratio: 2:1. -- Differential pressure gauge and sequencing timer board in enclosure. -- Single hopper outlet with sealing drum cover kit. -- Motor starter & Controls.Features: -- Automatic pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. -- Heavy-duty steel support structure to position unit approx. 4' above the floor. -- Included: Installation, operation and maintenance manuals. Sold with a (6) month mechanical warranty
Call for Price
DONALDSON-DAY 64-HPW Pulse Jet Dust Collector with walk-in access to filter bags. -- General data: 10,250 to 6,750 CFM @ 16.1 to 10.6 ACR (air-to-cloth ratio), 637 sq. ft. filter media using (64) 3" x 6" oval x 8' bags, singed polyester filter bags (non-woven micron-rated felt). -- "PowerFlo Cleaning System" allows a higher ACR, "Dura-Life" bag technology allows higher surface loading & pulse cleaning resulting in a two-to-three fold filter life (when changing bags due to pressure drop), Super-sonic nozzles' converging-diverging design produces an intermittent jet of powerful high volume 'induced' air for efficient bag cleaning. -- Fan/Motor: New York Blower ACF/PLR Class IV size 22 ACF fan belt driven by a 40 HP US Electric TEFC 1775 RPM motor. Fan inlet is 26". Upward blast discharge. -- Includes: Explosion Vent,TORIT/DAY Rotary Air Lock with Baldor 3/4 HP motor., Walk-in access filter bags, caged access ladder and side hand rail, steel support structure. Connecting ductwork from blowers to collector. No return air is utilized on the current installation.
Call for Price
DONALDSON-DAY 48-HPT Pulse Jet Dust Collector with top access to filter bags. -- General data: 7,800 to 5,100 CFM @ 16.1 to 10.6 ACR (air-to-cloth ratio), 490 sq. ft. filter media using (48) 3" x 6" oval x 8' bags, singed polyester filter bags (non-woven micron-rated felt). -- "PowerFlo Cleaning System" allows a higher ACR, "Dura-Life" bag technology allows higher surface loading & pulse cleaning resulting in a two-to-three fold filter life (when changing bags due to pressure drop), Super-sonic nozzles' converging-diverging design produces an intermittent jet of powerful high volume 'induced' air for efficient bag cleaning. GOYER pulse valves. -- Fan/Motor: New York Blower Series 20 GI, Size 334 fan belt driven by a 30 HP US Electric TEFC 1775 RPM motor. Fan inlet is 19" dia.. Upward blast discharge. -- Includes: Explosion Vent, Rotary Air Lock with belt driven motor, top access filter bags, caged access ladder and top hand rail, steel support structure. Pipe adaptor for blower to collector line and square to round adaptor on filter inlet. Fan exhaust stack. No return air is utilized on the current installation. -- Approx ship dimensions: 52" depth by 21' ft high, about 5,000 lbs.
Call for Price
TORIT MIC 1390-155 Dust Collector. -- Overall Specs: Approx 7,500 CFM @ 6:1 Air-To-Cloth Ratio. Total filter area of 1,236 sq. ft. comprised of (128) filter bags. -- Main Fan: KOGER AIR belt-driven blower assembly powered by a TEFC 20 HP Air Handling Fan mounted on the clean air side. Ground mounted c/w safety guard Discharge contains a diverter valve for summer/winter operation and return air to building. -- Filter Cleaning: (1) HP Concentric Drive motor with output connected to mechanical linkage grid to all filter bags. Filter unit is configured under negative pressure. -- Comes with: Ladder/cage/platform/safety rail to access filter bags for maintenance and repair. Hopper is reinforced and has a 55° x 68° taper discharging to a manual slide gate. Filter has 14" - 28" inlet opening.
TORIT 20-3 CYCLONE W/ DFT-2-4 CARTRIDGE DUST COLLECTOR3,000 - 4,500 CFM at 9" to 5" WG static pressure, 10 HP Main motor, 20" dia. cyclone; 10" dia. inlet, 12" dia. outlet. Features: -- With the long, tapered design and high inlet velocity (5,100 - 7,140 FPM), the Cyclone acts as a High Efficiency particle separator, particulate matter is diverted by the helical baffle, imparting a spin to the air stream. -- Centrifugal force moves the dust to the sides of the Cyclone and down to the bottom; empties into 55-gal. drum. -- Includes: -- DFT-2-4 Cartridge Dust Collector w/ 7.5 HP blower. -- Approximately 2,700 CFM w/ (4) Cartridges and pulse jet cleaning. -- TORIT Checker Board controller for both units with starters. -- Support stand. -- Flexible connecting hose. -- Air silencer
Call for Price
DONALDSON-DAY 256HPW8 Pulse Jet Dust Collector with walk-in to filter bags. -- General data: 40,500 to 26,000 CFM @ 16.1 to 10.6 ACR (air-to-cloth ratio), 2,544 sq. ft. filter media using (256) 3" x 6" oval x 8' bags, singed polyester filter bags (non-woven micron-rated felt). -- "PowerFlo Cleaning System" allows a higher ACR, "Dura-Life" bag technology allows higher surface loading & pulse cleaning resulting in a two-to-three fold filter life (when changing bags due to pressure drop), Super-sonic nozzles' converging-diverging design produces an intermittent jet of powerful high volume 'induced' air for efficient bag cleaning. GOYER pulse valves. -- Fan/Motor: Two New York Blower PLR, Size 33, class IV fan belt driven by (2) 75 HP 365T, TEFC 1775 RPM motors. Fan inlets are approx 37" dia.. Upward blast discharge. -- Includes: Lower Hopper, Powered Horizontal Auger/Rotary Air Lock with belt driven motor. Explosion Vents, side access filter bags, caged access ladder and , steel support structure. Pipe adaptor for blower to collector line and square to round adaptor on filter inlet. Fan exhaust stack. No return air is utilized on the current installation. -- Shell dimensions approx 192" wide x 112" deep x 274" top to bottom of hopper (332" high (overall height) . Weight about 15,000 Lbs.