Sawmill Equipment For Sale

TREMZAC 248-TR-CO Portable Shaving Mill [email protected] supply; 65 HP from P.T.O. of tractor at 540 RPM (not included ). -- Emergency shutdown included. -- Log; 5" to 22" in diameter x 96" long. -- Capacity ( shaving ) 5 to 19 cubic yards/hour. -- Hopper Magazine; 24" wide x 96" long. -- Double Axle Trailer with hydraulic brake included. -- Cutter head 24" with (8) knives -- Dimensions; 7' 3"' wide x 31' 3" long.

Troyer Machine Dust Blower Size 26, Inlet Size 12", Outlet Size 11" w/Electric Drive and 12"x10' Incoming Pipe and 11"x4' Outgoing Pipe w/Square Adapter

TSM 18' LH Drop Saw Trimmer w/Pneumatic Operated Saw Ladders, 22" Dia Saw Blades, 14' L Infeed w/Even Ender Rolls, Dual Hyd Operated Even Ender Stops, 6 Strand 20' L Lugged Incline Slanted Deck w/Even Ender Rolls, On Board AB 300 Amp MCC, Hyd Power Pack & Dust Extraction Manifold. TSM 24" x 24' x 9.5" Deep Vibratory Conveyor w/Drive. TSM Drop Down Lumber Inspection Station w/7 Strand 36' Staging Deck w/Board Dealers, Board Turners, Operator Platform, Drives, Control & Tally Console. TSM Dual Transfer Decks 10' x 45' 5 Strand w/78 Rooftop Chain & Drive, 12' x 12' 5 Strand w/3' Pop Up Bypass Transfer Gate, Has Common Drive Shaft with 1st Deck. TSM Lower Drop Down Lumber Inspection Station w/7 Strand x 25' Staging Deck w/Board Dealers, Board Turner, Operator Platform, Drives, Control, Tally Console, 17' 4 Bar Unscrambler & Even Ender Rolls. 11' 2" x 16' 5 Strand Transfer Deck w/130 Rooftop Chain, Stops & Drive. TSM 10' 4" x 25' Transfer Deck w/78 Rooftop Chain & Drive. Scan Meg Scanner w/Office Hard Drive, Software, Tally Recording System & Printers. TSM LH 16' Drop Saw Trimmer Outfeed Transfer Deck w/Even End Rolls, Decline Deck, Pop Up Bypass Transfer Sweeps on 2' Segments. Markem 5000 Series Case Coding Ink Jet Printer w/2 Applicator Heads. Mattews Jet-A-Mark Mdl D0D-8400E Board Grade Marking System.

Turner Machinery Company Resaw Good Condition

3000 CFM 5 HP 5-1/2” static pressure

Twin Cities Fan, Size: 330, 37” wheel, 28” let, 50HP, Backward curve Motor: 50HP U.S., OTHER SIZES AVAILABLE, Wheel Diameter: 37 inch Inlet diameter: 28”+ Outlet: width 19 ½” X 26 ½” Size: 330 TYPE: RTF-SW CLASS: 18 ARR: 1 Serial #: 96-11677-1-1 We repainted the fan We can test run fan and provide a video Fan includes at not charge a custom pallet for shipping Contact us for pricing and a freight rate

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

TYLER - 2400: Slat-Wall Machine -- SpecificationsProduces T-slots "Slat-Wall" for architectural/store fixture panels.48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 1/2" to 1-1/2". Machine capable of processing up to (40) panels/Hr; depending on material density, thickness, and the slot profile. -- Equipped with:Machine is currently setup with: (18) Router spindles on 3" centers.Spindles are driven in groups of (3) with: (6) 7-1/2 HP - 3,450 RPM Motors that drive the (18) router spindles; all router spindles rotate @ 15,400 RPM.Machine can accept up to (21) router spindles & the additional spindles can be activated by adding (1) additional 7-1/2 HP - 3,450 RPM motor. -- Machine Operating SequencePanels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high-speed return,Variable feed speed control, router assembly traverses on ground & polished rails with chain drive.Panels are positioned along the 8' rear edge fence line; distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch). -- Operator & Machine ControlALLEN-BRADLEY Electrical controls for the machine cycle; "setup" mode of operation.Machine cutting cycle is initiated by: 2-Hand Operator safety buttons located on the right front of machine. -- Complete with:Overhead holddown assembly with: (2) Large air cylinders; (6) arms with spring loaded clamping pads hold the panel in place.Panels are loaded from the 8' front and exit to the side for easy unloading. -- Options Include: Assortment of used "Diamond Tooling" (diamond router bits) Assortment of extra motors Spare parts Service manual & docs. -- Actual Model: TYLER 2400

Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, good working condition

Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition

Tyrone Berry carriage drive, cooling radiator, no power

Tyrone Berry carriage drive, cooling radiator, working condition

Tyron-Berry SMA 215 Carriage Drive with Drum & Cable S/N 27440

TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.

Tyrone Berry 280C Shotgun Feedworks

Berry Feed Pump

Tyrone-Berry Drum Package

Tyrone-Berry Drum Package

Tyrone Berry SMA 215 Carriage drive

Tyron Berry SMA 213