Meadows For Sale

TORIT - CHECKER BOARD: Control PanelTORIT Checkerboard Control Panel for a DFT3-18 Dust Collector up to a 25 HP Blower.Includes -- Start/Stop push control buttons for Dust Collection System. -- Electric disconnect to shut down power if needed. -- HEPA Filter pressure gauge. -- Alarm with light when dust filters need to be cleaned. -- Pressure gauge showing the air flow in the system. -- Air pressure pulse cleaning controls to clean dust from filters. -- Control box mounted on legs.

TORIT/DAY 156RFW10 Dust Collector with Rotary Air Lock and Non-Return Valve & Fire Prevention.20,300 CFM at 10:1 Air-to-cloth ratio, (156) filter bags 10' long providing a total 2030 sq. ft. of filter area; filtration media cleaning via 3 HP medium pressure air pump eliminating the need for compressed air which can be susceptible to condensation and freezing. -- Rotating cleaning air manifold driven by 0.33 HP motor, uses only (1) Nema-9 solenoid and diaphragm valve which rotates over the bag openings; galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride up of bags once installed. -- Clean air side fan assembly with 24ACF CLASS I-III fan driven by a 40 HP TEFC motor. Depending on Air-to-Cloth ratio needed this fan is undersized,ie. about 12,000 CFM and can be upgraded or 2nd fan used. TORIT "16 AN" 16" rotary air lock at the bottom of 60° hopper. -- Features: (2022) AIRCOM/BOSS PRODUCTS. NRVC Non Return Valve Combo. Extinguishing Box. GM SYSTEMS GMCU161SD-FM Fire Prevention Control Unit which manages 5 independent lines (16 program inputs & 5+10 outputs) - FM Certified. RAPTOR SERIES with related RAPTOR SPARK RS-BOX02.(IR) -- Complete with: Walk-in plenum, maintenance platform, caged ladder & support structure, electrical control panel. -- Includes: Outdoor piping. Barely used since bags were replaced. -- Please inquire for dismantling & rigging quotations

DONALDSON-TORIT - 376RFW-10 or 12 , ...Dust Collector: 45,000 CFM @ 9.7:1 Air-to-cloth ratio; 140" dia. round baghouse with: (376) filter bags of 10' length (oval bags provide for radial movement of bag during cleaning for longer life), total 4,632 sq. ft. filter area. -- Filtration media cleaning via a floor-mounted 7.5 HP medium pressure air pump (eliminates the need for compressed air which can be susceptible to condensation and freezing); 36" x 65" return air outlet and 48" x 48" inlet for dust laden air. -- Includes: Rotating cleaning air manifold driven by 0.33 HP motor; (1) NEMA-9 solenoid and diaphragm valve which rotates over the bag openings; walk-in plenum for bag access/maintenance. -- Galvanized steel bag frames with positive bag bolt down to eliminate leakage and ride-up of bags once installed; walk-in access door at top of ladder. -- Equipped with: Structural steel support; maintenance platform; caged ladder; bolt-on involute arm; explosion doors (need to be replaced). -- Includes Backward inclined FAN EQUIPMENT: Size 7 BCS floor-mounted Fan set at 45,000 CFM @ 15" SP belt driven at 1,485 RPM; powered by a 200 HP TEFC Motor via OMRON/IDM E7 Series Inverter. -- 24" Rotary Air Lock at the bottom of the 60° hopper. -- Complete with: Pictured electrical controls are included. -- Note new 200 HP electrical motor was replaced recently. --. Unit had an accidental fire at bottom section near hopper causing the explosion doors to burst. Unit still working as they are not returning the air. Can be sold with of without replacement of doors. Cost of which is negotiable. -- Professional dismantling and rigging available at extra cost. Please call!

TORIT 360-IRD-15 Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Down flow air pattern allows airflow and gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure dropSpecifications: -- 15 HP direct drive, floor mounted blower. -- 4,800 CFM @ 8" wg, 4,050 CFM @ 9" wg, 2,400 CFM @ 10" wg -- (21) Dura-life filter bags with a cloth area of 192 sq. ft. -- (3) Collection points for plastic collection bags.

TORIT - 460-IRD-20: Dust CollectorAn easy and economical solution for a wide range of wood dust collection applications. Downflow air pattern allows airflow & gravity to move filtered dust to collection receptacles for longer bag filter life and reduced pressure drop.Specifications -- 20 HP Direct drive; floor mounted blower. -- Fan inlet: 17". -- CFM: 7,000. -- Set of filter bags. -- Steel elbow from fan to collector. Motor Starter included.

TORIT-DONALDSON ADMC AD8 DRYFLO Cartridge Dust Collector. A Mist collector designed for long-lasting high collection efficiency capture of coolant and machining oil mists in metalworking applications. Even smaller amounts of dust can be filtered in the dirty air stream. -- DRYFLO is a proprietary cartridge which outperforms electrostatic precipitators and mist collectors utilizing standard HVAC envelope and cassette filters. Filter unit features a unique air-side filter retention system allowing for quick filter changes with minimal worker contact with collected oil. -- Also feature three-stage Filtration via a.) prefilter, b.) wrap allowing, c.) the filter cartridge to drain and coalesce smaller coolant mist droplets in to larger droplets. Plus optional fourth stage HEPA filters available for applications where smoke exists or additional efficiency of discharge air is required. -- Overall data: Capable of 17,600 CFM; (8) Filter Cartridges, 1,760 sq. ft. of filter area, -- Complete with: Ground mounted fan powered by a 40 HP motor, belt-driven. Fan includes a variable volume inlet. In prior application clean air was not retruned to building. -- Blower currently setup for approx. 15,000 CFM with 40 HP, Baldor Super-E, 324T frame, 1.780 RPM motor. -- Enclosure dimensions: 133" long, 68" deep, 160" high. Filter weight is 7,300 lbs.

ASSORTED MOTORS, IN ALL HP & SPEEDS AVAILABLE. Chipper and band mill motors 400HP, US, 585 RPM, DRIP, FRAME 1689S. TOSHIBA 200 HP at 1200 RPM. General Electric 300 HP, 514 RPM, 460 Volt for direct connect, Old style GE frame 17A's and 17B's to redesign up to 500 HP @ 450 RPM. 300HP ALLIS CHALMERS MOTOR 514 RPM, DRIP, 30KS8 FRAME. Many other sizes available CALL FOR YOUR SPECIFIC NEED. From 10HP to 600HP. See gear reducers with various HPs and ratios (see Gear Reducer listings).

TREMZAC 248-TR-CO Portable Shaving MillPower supply; 65 HP from P.T.O. of tractor at 540 RPM (not included ). -- Emergency shutdown included. -- Log; 5" to 22" in diameter x 96" long. -- Capacity ( shaving ) 5 to 19 cubic yards/hour. -- Hopper Magazine; 24" wide x 96" long. -- Double Axle Trailer with hydraulic brake included. -- Cutter head 24" with (8) knives -- Dimensions; 7' 3"' wide x 31' 3" long.

Troyer Machine Dust Blower Size 26, Inlet Size 12", Outlet Size 11" w/Electric Drive and 12"x10' Incoming Pipe and 11"x4' Outgoing Pipe w/Square Adapter

Hydraulic motor for power, air-operated up and down movement, hold-down wheel, and hydraulic motor on the feed belt. In good condition.

TSM 18' LH Drop Saw Trimmer w/Pneumatic Operated Saw Ladders, 22" Dia Saw Blades, 14' L Infeed w/Even Ender Rolls, Dual Hyd Operated Even Ender Stops, 6 Strand 20' L Lugged Incline Slanted Deck w/Even Ender Rolls, On Board AB 300 Amp MCC, Hyd Power Pack & Dust Extraction Manifold. TSM 24" x 24' x 9.5" Deep Vibratory Conveyor w/Drive. TSM Drop Down Lumber Inspection Station w/7 Strand 36' Staging Deck w/Board Dealers, Board Turners, Operator Platform, Drives, Control & Tally Console. TSM Dual Transfer Decks 10' x 45' 5 Strand w/78 Rooftop Chain & Drive, 12' x 12' 5 Strand w/3' Pop Up Bypass Transfer Gate, Has Common Drive Shaft with 1st Deck. TSM Lower Drop Down Lumber Inspection Station w/7 Strand x 25' Staging Deck w/Board Dealers, Board Turner, Operator Platform, Drives, Control, Tally Console, 17' 4 Bar Unscrambler & Even Ender Rolls. 11' 2" x 16' 5 Strand Transfer Deck w/130 Rooftop Chain, Stops & Drive. TSM 10' 4" x 25' Transfer Deck w/78 Rooftop Chain & Drive. Scan Meg Scanner w/Office Hard Drive, Software, Tally Recording System & Printers. TSM LH 16' Drop Saw Trimmer Outfeed Transfer Deck w/Even End Rolls, Decline Deck, Pop Up Bypass Transfer Sweeps on 2' Segments. Markem 5000 Series Case Coding Ink Jet Printer w/2 Applicator Heads. Mattews Jet-A-Mark Mdl D0D-8400E Board Grade Marking System.

Turner Machinery Company Resaw Good Condition

3000 CFM 5 HP 5-1/2” static pressure

Tyler Kerfsaver XL Resaw 1-1/4" Blades 36" Diameter Bandwheels Includes: Feed system that can tilt to mill tapered siding

Tyrone Berry SN: A2850, Model:SMA-225, spool of 3/4" steel cable, 60hp electric motor, hyd tank, good working condition

Tyrone-Berry feed, SMA-285 carriage feed, includes cable drum and hyd unit, good working condition

Tyrone Berry carriage drive, cooling radiator, no power

Tyrone Berry carriage drive, cooling radiator, working condition

TYRONE-BERRY Carriage feed, model 230 good condition with 125 HP motor on Hydraulic system and drum section. Drum has 20" x 20" face and grooved for 3/4" cable.

Tyron-Berry SMA 215 Carriage Drive with Drum & Cable S/N 27440