Sawmill Equipment For Sale
.gif)
3614 Results Found
Call for Price
MOTORS - MOTOR STARTERS - TRANSFORMERS - MISC ELECTRICAL EQUIPMENT - PHASE CONVERTERS
Call for Price
Rucker Hydraulic Unit
Call for Price
$ 139,500
S&W Model 700 Sawmill 4500 hours 1600bf per day Capacity 26' long x 52" Heavy duty mill Believed to be a 1994
Call for Price
2,000,000 BTU Direct Fire Heater | 230V 1 PH | LPNG | SH2000 LPNG
Call for Price
Salem Linebar Resaw Runaround includes: 52in X 15ft in Feed Rollcase with Positioners & Log Turners, 54" X 35' Outfeed Rollcase with 2-Way Chain Jump Transfers, 12' X 14.5' 5-Strand Transfer Deck with 10' X 11.5' 4 Strand Camelback Chain, 12' X 10' 4 Strand Cant Lowering Deck with Air Stops & Board Tipples, 12' X 14' 4 Strand Transfer Deck, 5 Strand 180° Transfer Return Deck into 11.5' X 15.5' 5 Strand Deck W/ Hydraulic Stops, Flippers & Pin Stops All with Electric Drive
Call for Price
Salem 4'x11.5' Steel Insulated Sawyers Control Booth w/ Air Conditioning
Call for Price
Salem 7.5 hp Electric / Hydraulic Power Unit
Call for Price
Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed
$ 27,000
SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.
Call for Price
Salem 7' Full Air Strain Vertical Head Band Saw with 26"x7' Slatted Offbreaker
$ 45,000
Thin kerf top arbor gang with infeed and outfeed. Features 300 HP arbor motor access door on left splined arbor guide lube system babbitt pot Salem double side guide milling machine lots of guides lots of saws soft starters control console Infeed features: 3 cross chains cant turner crowder roll
$ 35,000
8" x 54" SALEM, bottom arbor, combination gang-edger. Center section only. Split machine. New solid feed rolls-chromed and knurled. New top press rolls-smooth-split 33" and 15" wide. (4) new 5" bore cylinders for press rolls. 3 7/16", double keyed, saw mandrel. Hydraulic feed. Saw shifting device outside of frame but no saws or collars but with shifting arms. 3 sets rubber cushions on press rolls. All sprockets are new with hydraulic drive. No infeed or outfeed. 125 HP motor included. No plumbing or electric wiring. New bearings on feed rolls. 20HP hydraulic power unit. Machine mounted on 6" beam. Price $35,000.00
Call for Price
Call for Price
Salem 35" Ring Debarker 5-Knife Current MCC will be used with another line. They may have an MCC to go with it. Indeed/Outfeed Rolls may be optional
$ 12,000
36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00
Call for Price
Call for Price
Salem 6" x 48" Gang Edger w/10' Powered Infeed Rollcase, Knurled Chrome Feed Rolls, Overhead Pneumatic Hold-Down Press Wheels, Hyd Driven, Material Positioners, Hyd Operated 19" Saw Shifting System, Laser Light Shifting System, (1) Laser Light, Controls, 75Hp Motor, 10Hp Hyd Power Pack, T S Manufacturing 24" x 20' Pneumatic Lateral Shifting Edger Outfeed w/(5) Overhead Powered Feed Rolls & No Drive
Call for Price
Salem 6' Band Heading