Cornell For Sale
.gif)
3698 Results Found
Call for Price
.jpg?width=300&height=200&mode=pad)
2002 HMC ET-10 Double End Trim Saw.
$ 32,500
HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
Call for Price
HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack
Call for Price
HMC V206H Rosserhead Debarker S/N 1147-79
Call for Price
HMC MDS-50 Left Hand Drop Saw Trimmer For trimming Boards, Cants, or Ties up to 8" thick and will pass 10" Material. Feed Chains are 81X chain driven by a 3HP Variable Speed Motor with hold downs, each 24" saw is belt driven by 10 HP motors, starters, and fuses are mounted to the Machine in a Nema 12 Enclosure. 0',2',8',10',12',14', and 16' saw units, set up to pass 20' long material. Automatic length trimming with manual override is controlled by programmable control, powered even-ender rolls with a 2 hp drive, and includes one stationary stop gate. Front, back, and top guards are included, and an Automatic shutdown if a door is open while the machine is running. Includes spacers to raise the machine. 360/440 volt
$ 34,500
rosser head style, all hyd. drive, 36" dia. log capacity x 12' long, very good condition
$ 27,500
Rosser head, slant track, hyd. drive on the head, in working condition, CALL FOR REBUILDING OPTIONS ON THIS MACHINE
$ 27,500
$ 27,500
$ 7,500
HMC Model; 1DC, AC carriage drive, complete unit ready to work
$ 7,500
carriage track/ frame for HMC model; AC-40 carriage, good condition
$ 20,000
HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" dia bottom blade and 36" dia top saw, includes complete mill package including 42" chain Log Turner (Sawmill) and nose skids, working condition
Call for Price
HMC 50-DBES S/N AC50BD695-02 3 Hbd Carriage, 5x8 Cab, Mudata Scanner/Setworks, 55' Track
Call for Price
HMC AC40 MM-10 Modular Mill Includes Track, Carriage, Cab, Controls, Husk, Top Saw & Carriage Drive S/N 281-83. Out and Ready to Ship
Call for Price
HMC double end trim ET-10 12ft
$ 14,000
HMC Two saw trimmer, Model ET10: Operator on left; NO electric setworks--manually operated hydraulic valve type; standard 10HP electric motors on saw blade; standard hydraulic system; NO belt conveyor. Offered as-is/where-is with no warranty or guaranty, as removed from service.
Call for Price
HMC Carriage 5x10 Cab with controls System is already removed from service and ready to load. Notes from seller: Carriage is 17'1" longKnee spacing is 63" from 1 to 2 78" from 2 to 3 1 to 3 is 141 1/4" Carriage frame is 76 1/2 " wide Track centers are 62" Track rails are worn out. We used the old track frame for our new carriage
Call for Price
HMC 3 Head Block Carriage
Call for Price
HMC Debarker Cab Controls 20"x20' Belt Waste Conveyor Model: V206HST S/N: 1518-93
Call for Price
HMC Rosserhead DEBARKER W/NO CAB OR CONTROLS