Sawmill Equipment For Sale

1988 Cooper End Dogging Scragg Mill with 48" Diameter Blades & 125HP Motors S/N CM-6076. Out and ready to go.

2004 Cooper 16ft Enddogging Scragg S/N CM-6181

2010 Cooper End Dogging Scragg Mill. 6' to 16' Length Capacity, Operator's cab with joystick controls, scanning, computer controls, (2) 150hp Arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off- bearing drop belts, hyd system, electrical panel with starters, 3-way separator outfeed roll case

2010 USED Cooper end dogging scragg mill. 6' to 16' length and up to 24" diameter log capacity. Includes: Operator's cab with joystick controls, COOPER scanning, computer controls, 150hp arbors, linear bearings for shifting saw husks, 56" inserted tooth blades, off bearing drop belts, hydraulic system,3-way separator outfeed roll case,  electrical panel WITH starters. Spare parts included.  Still running and can be seen until February 28. 

2004 Cooper Scragg Mill

COOPER Dropsaw Trimmer - 24' left hand trimmer. Cuts up to 8" thick and 24 feet long. 15 hp saw motors. Zero saw adjustable for desired overtrim. Saws every 2 feet from 6 to 24 feet. 11 lugged feed chains with even-ender. Hydraulic variable speed feed. Controls and console remain wired. Over dimensional for transporting 32' long x 11.5' wide x 10'3" tall.

Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain

MLS Number 13476937 2010 Cooper Overhead End Dogging Scragg Mill Cuts 6-16ft lengths Control Cabinets and starters Cab with joysticks, scanning and computer controls linear bearings for shifting saw husks 56 inch circle saws Two 150 HP arbors Off bearing drop belts 3 way separator outfeed roll case Includes $25,000 in spare parts Removed from service February 28, 2025 Ready to load

Cooper Optimizer Gang Rip Saw Cooper Edger Both set up inline and ready to be removed.

Cor-Dus Custom Belted Live Rolls 12" x 12.5' With Motor and Drive.

Cor Dus 12" x 5' Belt conveyor

Coral GAM/2C Dust Collector -- Free standing self-contained Collector; base mounted 5.5 HP - 3,420 RPM motor.Equipped with: -- (2) Upper filter bags; (2) large collector bags; approx. 3,500 CFM, 117 sq. ft. filter area; approx. 50 cu. ft. collection cap. -- Complete with: 12" Dia. inlet; mounted on steel fabricated base w/wheels.

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP

Corinth 36" 3 Head Block Carriage, Track,Cab, Control, T-Berry 214 Drive, Mellott #5 Log Turner & Meadows 2 Saw Vertical Edger.

100 HP 3 Phase Motor Helle Log Turner Infeed Table Outfeed Table 25HP Chip Blower

Combination gang board Edger

The Corley Gang Edger is a reliable choice for sawmill operations seeking efficient lumber processing. This used machine is designed to handle a cutting capacity of 5" x 36", making it suitable for various wood processing tasks. It comes equipped with three blades, including one stationary blade, ensuring precision and stability during operation. This machine also features 3-foot infeed dead rollers that facilitate smooth lumber movement into the cutting area. Its internal power feed system enhances the feeding process, contributing to consistent and effective cutting performance. The Corley Gang Edger's construction ensures durability and dependable function in demanding environments. Overall, the Corley Gang Edger offers solid performance for those in need of a capable and efficient edger in sawmilling applications. Consider this machine for its blend of cutting capacity, reliable blade configuration, and integrated feed features, making it a practical investment for streamlining lumber processing tasks.

Corley Band Mill