Sawmill Equipment For Sale

This machine is designed for cutting a max height of 4"X 27-1/2 holds up to 6 saws and can be used for a Multi Gang Rip as well.

HTPM 250 Machine chips small logs with right and left chipping heads and profilers in one pass the HPM 250 goes behind this chipping module to maximize use of the roughest logs to make good lumber See pictures to see one in production.

The HCD2M 250 Double Arbor Gang Saw is designed for cutting timbers with a thickness of 9-3/4" and 27-1/2" wide Saw arbors are fixed. Hydraulic feed with knurled rolls top press roll is adjust hydraulically. Cutting rate is 65' per minute. For more information call Jackie Kittrell 931-698-3342 - 931-797-6284

HYM 350 Hydraulic Horizontal Slab Reclaim Saw with operator controls (2) 40 HP motors cuts boards as short as 48" X 4-3/4 to 13-3/4 wide X 1/2 to 4-3/4 thick. This might slab saw will produce boards from slabs that would normally go to the chipper. Reclaim and pay for this mighty saw

Turn out Timbers, cross and switch ties daily. Soft or hardwood 2-1/2 per minute This quad log processor will cut 6” to 13.7" logs 5’ to 20’ , log Turner infeed 4 independent arbor saws. Hydraulic Sharp Chain Feed Through..... outfeed with can't/rail tie feed through and board separation tailing device. Quality , performance in every cut Simple handling, operation and maintenance. Up to 200 HP total saw power depending upon application includes MCC and PLC. Deluxe operator console with chair. Purchase now machine is in stock Great for making cants and crossties as well as lumber with the 220 Gang or the for all 0% down and no processing fee on Financing Call Jackie 931-698-3342. Try before you buy!

This bull type gang edger is truly the beast. Arbor runs up to 8 saws with a combination arrangement that fits your needs. 4 3/4 inch X 25.5 inch input with the output of 1/2" to 4-3/4" with 6-1/4 thick capability. Cutting process is provided with diamond circular saws, single saw shaft is fixed. Hydraulic roller with fence. Infeed top press roll is hydraulic. Cut grade, pallet stock or pallet cants with this mighty machine comes with a set of spare parts. See this machine at the Nashville Forest Product Machinery & Equipment EXPO August 6-8 Call 931-797-6284

This mighty bull gang edger is ready for work. Cutting 6.25" X 27.5" cuts down to 1/2" boards. This 100 HP single arbor machine has diamond circular saws, Single saw arbor is fixed. Hydraulic feed through with hydraulic top press roll. Infeed table with hydraulic feed roller and fence for accuracy in sawing. This machine is available in a double arbor machine which will cut a little faster than the single. This saw has (2) 50 hp independent arbor motors for the double arbor machine. See it at IWF in August 2024 or order yours today. 931-698-3342

4 saw edger with 3 movable saws and saw auto lube system with PLC joy stick controller. Adjustable for 4-3/4" material hydraulic cylinder saw position station Hydraulic feed through comes with motor and PLC control cabinet. Buy and Conveyors with jump up chains available as well. Special Deal Laser Lights and saws included.. Call 931-698-3342 Jackie Kittrell Try before you buy you don't like it send it back. But we are certain you will love it.

Log head saw cutting system. It is designed to cut logs using your favorite carriage with a diameter range of 6" to 27.3/4" cutting process is provided with maximum precision with two fixed strobe circular saw. That's back and forth on the track this is a double cut head rig. (2) 60 HP motors run 60' per minute. The saw pictured here was a trade in and will be retrofitted at the factory. Call 931-698-3342

This 4 saw 16' x 6" multi saw trimmer will easily cut boards and cants in a multi cut product or simply double end trim. Fixed saw precision end cuts the lumber and 3 movable saws are easily adjusted with a slide and lock motion. Independent saw motors with 5.5 KW or about 7.5 hp motors. Quality and Performance in every cut simple handling, operation and maintenance. Call Kittrell 931-797-6284

This beefy mighty machine is perfect for cross ties and custom timbers, and pallet and lumber cants. Single cut or double cut side boards. Excellent log turner with sharp chain feed through for lengths up to 60' special order. Operators controls Nice tailing device with center press roll section for timbers/ cants and ties. Quality and performance with every cut. Simple operation and maintenance. Call Kittrell Sawmill Brokers 931-698-3342

ALJON - 580CL: Car Logger Baler - Reconditioned10' x 19' Chamber and "L-Box" design; swallows vehicles as large as full-size Vans with ease.Specifications: -- Open Chamber: 19-1/4' x 10.1' x 3.6'. -- Bale size: 40" x 25" x Variable. -- Production: (20 - 25) Per hour. -- Scrap metal productions: (17 - 20+) Metric tons/hour. -- Power unit: JOHN DEERE Diesel Engine.Features: -- "L-Box" Design.

Wheel face 10” 1 3/8 “ thick rim

Allen-Bradley Centerline 600 Amp MCC w/30 Buckets

Allen-Bradley Centerline 600 Amp MCC w/34 Buckets

Allied Blower

Alvey-powered roller conveyor S-shape Roll-case system powered or gravity Overall Length 20/23 1/2 feet & width 12 feet 24” overall width Adjustable height Additional roll case available Stored inside We can quote a price including freight

(4) Alvery Live Rolls Approx 4' x 10' Electric.

Amadas Industries Swing Hammer Hog Model HMO 13 ODD S/N 37069