Sawmill Equipment For Sale

DENRAY 9600 B Down Draft Sanding TableExtra large 48" x 96" table; Comfortable 36" working height. -- Powerful system with 4,800 CFM rating. -- 5 HP Motor with magnetic starter. -- Space-saving self-contained unit w/built-in dust drawers and high efficiency cartridge filters. -- No duct work, no loss of conditioned air. -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- Fully enclosed unit. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust that can be directed away from operator. -- Quiet operation with only 82 dB. -- Available options; (4) Swivel casters with (2) that lock in place, Auto-Self cleaning timer or muffler.

DENRAY 7200 B DOWN DRAFT TABLELarge 48" x 72" Table. -- 3,900 CFM rating after filters. -- 5 HP Motor w/magnetic starter. -- Space-saving fully self-contained unit: No duct work, no loss of conditioned air. Contains (2) cartridge filters that clean to 0.5 microns. -- Comfortable working height 36". -- 1-1/8" Thick hardwood frame worktable with 3/4" thick MDF board and rubberized surface. -- "Self-Cleaning" System with push button start to force compressed air from a storage tank into the filters and force dust into the dust drawer. -- Floor level air exhaust which can be directed away from the operator. -- 84 dBA Sound level. -- Options include; Timer to automatically clean filters without operator, (4) swivel casters (2) that lock into place, noise reducing muffler (Reduces volume by 10 to 12 dBA),Unit also available in 220 V single-phase.

DAC-1200 - DENSACAN: Can DensifierThe "DAC-1200" is fully automatic and will run continuously as long as cans are fed.Features -- Automatic shut off when empty. -- Capacity in pounds/hour. &#9679 Aluminum: 1,200 Lbs. &#9679 Aluminum: Flat 2,000 Lbs; Ferrous: 2,500 Lbs. -- Biscuit description; typical size: 11" x 13" x 9". -- Motor: 20 HP.

Designed Automation 4 Strand Log Deck

7 Chain Unscrambler with Rollers

Design Automation 6' Manual Sticker Stacker, 4 Strand Infeed Deck, Unscrambler with Even Ender, 6' Stacker with Stick Placing Platform & roll Outs. In Place Not Powered.

Design Automation 6' 4 Arm Stacker W6x78x56' Live Roll & 45 x 21' 2 Strand Stick Deck with Electric Drive. Softac Tally System

2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls

DEVAIR 447 15 HP 2-Stage Horizontal Tank-Mounted Air CompressorSpecifications: -- Cap. 51.8 CFM, Max. pressure 175 PSI.Complete with: -- 120 Gallon Cap. 24"; Dia. x 60"; L Horizontal Air Receiving Tank.

Hex 45" Whole Log Metal Detector

The seller has upgraded to a new machine and no longer needs this rip saw. This machine still runs a few times a week at the shop. 15 HP Motor 2 HP Feed Motor 2" Arbor 16" Max blade capacity Chain drive

DISA CS-4 MAXI Dust collector with Rotary Air Lock. Approx. 16,000 CFM at 8.7:1 air-to-cloth ratio; 1,725 sq. ft. of filter area, with (128) filter bags filtering to 3-micron. -- General Info: CS-4-M consists of (3) filter modules & one entrance module. -- Comes with: DISA, S56-500 Material Handling fan powered by 50 HP TEFC motor. Fan nominal rating: 16,000 CFM @ 9" SP. Fan is currently mounted on elevated support but can be installed on the ground as well. -- (3) Reverse air bag cleaning modules with motorized fans that clean the bags every (4) hours of operation automatically, each with 2 HP fan motor. A damper at inlet closes during cleaning cycle to prevent blowback. -- Complete with: Hopper bottom as collected dust is conveyed to one end where a NRS-20 Rotary Air Lock where dust is discharged into Transfer fan. Filtered air return unit, 8' support structure to allow for dumpster under Dust Collector. -- Includes: Control panel, motor starters and switches, and Explosion Panels. Material handling main fan w/motor mounted to side of base module. -- 26" diameter inlet pipe, 97" clearance under collector for dump hopper, free standing steel bolt-together structure, -- Features: Dust transfer from bottom of Rotary Air Lock to enclosed container by separate floor mounted material handling fan, approx 7.5 HP. -- Note: Pictured storage bins are not included.

This system was running daily before hte facility shut down 4-years ago. Buyer will need to provide rigging. (240) 4" x 12' Bags 100 HP Main Motor Bags are cleaned by compressed air approx every minute System is approx 1998 Approx 35000-38000 CFM

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).

DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).

DODGE gear reducer: 16:1 ratio; 26 HP. Price $600.00. As-is/where-is. (Inv. # G-2).

Reliance / Dodge gear reducer, 100 RPM output, 5HP Reliance motor: 230/460V, RPM 1700, SF:1.00, INS. CL:F, Reliance ID# B77Y9718P, Hz:60, Dodge# size:5-147P-DG4A-2-17.1-A1, Four are available, Several other types and sizes are available, Videos are available: https://youtube.com/shorts/tpY0HEaslLI

Donaldson Model ECB & ECB-2 Dust Collector - 3-units total Control Panel

Donaldson Torit DCE- Environmental Control Booth & Dust Collector Torit ECB-4 Modules, complete with control panel Built dust booth and own lighting. Environmental Control Booth Powerful, Self-Contained Dust Collection The Donaldson Torit® DCE Environmental Control Booth, ECB Work Station, is ideal for finishing works on large and irregularly shaped parts. This self-contained working environment is specially designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The unique booth design is complete with lighting, sound- proofing and built-in dust collection. It requires no ductwork, and re-circulates the cleaned air for reduced energy costs. Workers inside the booth enjoy complete freedom of movement, cleaner air and excellent visibility. The powerful filtration capabilities of ECB Work Station prevent migration of dust to other parts of the plant, protecting workers outside the booth from the dust and noise generated inside the booth. Stand-alone unit for easy moving at the plant High filtration efficiency with Ultra-Web® cartridge filters Freedom of movement and improved visibility Flexibility to increase capacity Requires no ductwork Safely recirculates cleaned air for reduced energy costs