Cam-Wood Band Resaw For Sale

Resaw-Band 

Air Compressor (106) Airlock (19) Band Chopper (1) Band Mill Thin Kerf (22) Band Mills (Wide) (24) Banding-Strapping Machines (82) Blowers and Fans (110) Boiler (13) Bolter Saw (1) Carriage (Sawmill) (41) Carriage Drive (Sawmill) (37) Chip Bin (15) Chip Cyclone (5) Chip Screen (28) Chipping Canter (1) Chop Saw (28) Circular Saw Husk (9) Circular Sawmill (61) Conveyor (57) Conveyor-Auger (4) Conveyor-Live Floor (5) Conveyor-Run-Around (1) Conveyor-Vibrating (75) Conveyors Belt (181) Conveyors Board Dealing (61) Conveyors Decks (Log Lumber) (196) Conveyors General (27) Conveyors-Barn Sweep (15) Conveyors-Live Roll (127) Debarker (52) Dip Tank (5) Drum Dryer (13) Dry Kiln (12) Dump Hopper (12) Dust Collection System (213) Edger Tailing Device (2) Edgers-Board (56) Edgers-Gang (37) Edgers-Slab (2) Edgers-Vertical (5) Electrical (108) Forklift (49) Gang Rip Saw (34) Gang Saw (38) GenSet (54) Hammer Mill (3) Hogs and Wood Grinders (132) Hydraulic Power Pack (66) Knife Grinder (26) Laser Lights (5) Log Home Machinery (2) Log Irrigation (2) Log Merchandising System (14) Log Turner (Sawmill) (23) Lumber Stacker (27) Lumber Sticker (2) Metal Detector (19) Misc (61) Operator Cab (8) Package Saw (5) Portable Sawmill (26) Post and Pole Peeler (21) Power Units-Engines (14) Radial Arm Saw (3) Resaw-Band (136) Resaw-Circular (2) Scissor Lift (36) Scragg Mill (28) Screening System (1) Setworks-Sawmill (4) Shaper (5) Sharpening Equipment (87) Shavings Bagger (4) Shavings Mill (27) Slab Saw (3) Stake Pointer (2) Stave Quartering Saw (1) Tie Processing (3) Trimmer (71) Unscrambler (32) Wheel Loader (65) Wood Chipper - Stationary (111) Wrap and Packaging (10)

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
5 Results Found
Sort By 
Recently Added Items
1969 Tri-state T-36-4
$12,900
1969 Tri-state T-36-4
Stenner EAGLE
$13,600
Stenner EAGLE
2005 Brewco B-1600
$105,000
2005 Brewco B-1600
Baker
$16,500
Baker
STANDARD LISTINGS
2019 Cam-Wood BX-1212BEE  Resaw-Band
$10,990

CAM-WOOD BX-1212BEE Single Bottom Head Band Resaw.Can be used to cut boards, cants, or reclaim slabs; can process up to 12" H x 12" W; 5/16" - 5-1/4" from blade to conveyor; 2 HP electric motor controlled variable speed from 12 - 80 ft/min. -- This Model BX-1212BEE is equipped with: 20 HP Saw Motor, 28" x 1" band wheels, 168" x 1" band saw blade (not included), hand wheel blade tensioning; manual elevation adjustment; 2 HP hydraulic system pump motor. -- Complete with: Spring-loaded steel and rubber upper pressure rolls; 11" X 215" conveyor belt. .

Jim Reedy
800-374-5009 ext:455
Call

2019 Cam-Wood BX-1212HR-1  Resaw-Band
$18,990

CAM-WOOD BX-1212HR-1 Single-Head Band Resaw w/30° Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; VFD controlled variable speed from 0 - 90 ft/min. -- Equipped with: 20 HP Saw Motor, 24" x 2" dynamically balanced cast iron band wheels, 184" x 1" to 1-1/2" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 10-5/8" x 165-1/2" infeed conveyor from 0° - 30° with side support for bevel cutting; 3 HP drive motor; variable feed speed 0 - 90 FPM; return gravity roller conveyor. -- Complete with: Programmable Digital Controller for convenient and accurate thickness setting; 1/4 HP blade elevation motor moves blade and saw head; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

2019 Cam-Wood BX-1212HR-3  Resaw-Band
$68,900

CAM-WOOD BX-1212HR-3 Three-Head Band Resaw w/Return Conveyor & Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; max. working height up to 12" H under pressure roller x 12" W; 1/4" - 10-5/8" between blade and conveyor; VFD controlled variable speed from 0 - 90 ft/min. -- Equipped with: Each head with 20 HP Saw Motor, 24" x 2" dynamically balanced cast iron band wheels, 184" x 1" to 1-1/2" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 10-5/8" x 165-1/2" infeed conveyor from 0° - 30° with side support; 3 HP drive motor; variable feed speed 0 - 90 FPM; return gravity roller conveyor. -- Complete with: Digital controller for convenient and accurate thickness setting; 1/4 HP blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

2019 Cam-Wood BX-1616HR  Resaw-Band
$27,500

CAM-WOOD BX-1616HR Single-Head Band Resaw w/30° Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; max. working height up to 16" H under pressure roller x 16-1/2" W; 1/4" - 12" between blade and conveyor; VFD controlled variable speed from 0 - 90 ft/min. -- Equipped with: 30 HP Saw Motor, 32" x 2" dynamically balanced cast iron band wheels, 230-1/4" x 2" - 4" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 16" x 165-1/2" infeed conveyor from 0° - 30° with side support for bevel cutting; 3 HP drive motor; variable feed speed 0 - 90 FPM; return gravity roller conveyor. -- Complete with: Digital controller for convenient and accurate thickness setting; 1/4 HP blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

2019 Cam-Wood BX-2410HR  Resaw-Band
$32,500

CAM-WOOD BX-2410HR Single-Head Band Resaw w/30° Bevel CuttingCan be used to cut boards, cants, or reclaim slabs; max. working height up to 10" H under pressure roller x 24" W; 5/32" - 10" between blade and conveyor; VFD controlled variable speed from 0 - 90 ft/min. -- Equipped with: 30 HP Saw Motor, 28" x 2" dynamically balanced cast iron band wheels, 195-1/2" x 2-1/8" x 3/64" band saw blade (not included); hand wheel adjustment for blade tension with tensioning scale. -- Tilting 23" x 215" infeed conveyor from 0° - 30° with side support for bevel cutting; hydraulic infeed and outfeed conveyor drive motor; variable feed speed 0 - 90 FPM; return gravity roller conveyor. -- Complete with: Digital controller for convenient and accurate thickness setting; 1/4 HP blade elevation motor; infeed and outfeed spring-loaded pressure rolls, easily adjusted by gear rack. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved