Sawmill Equipment For Sale

Design Automation 6' Manual Sticker Stacker, 4 Strand Infeed Deck, Unscrambler with Even Ender, 6' Stacker with Stick Placing Platform & roll Outs. In Place Not Powered.

2004 Detroit Diesel MTU 660 KW Generator Skid Mounted 277/480V - 60Hz 540 Hours Digital Controls

Diehl MR90 Roll Feed Gang Saw

DIXIE - 15 HP: Dust Collector Specifications -- 15 HP Motor. -- 1,760 RPM. -- Air Pulse filter bag cleaning System. -- (2) Bottom outlets. -- 15" Diameter: Inlet pipe size. -- Wall-mounted motor control station. -- Overall Collector footprint: 90" Wide x 67" deep (101" with rear-mounted fan) x 122" high.

Used DODGE TDT26 shaft mounted gear reducer; 25.66:1 ratio, input shaft diameter 2 3/8", bore 5", S/N 1645. Offered as-is where-is. (INV.G-18) Price $2,255.00.

DODGE gear reducer: 195:1 ratio; 3 HP. Price $850.00. As-is/where-is. (Inv. # G-3).

DODGE gear reducer: 16:1 ratio; 26 HP. Price $600.00. As-is/where-is. (Inv. # G-2).

DODGE gear reducer: 194:1 ratio; 10 HP. Price $900.00. As-is/where-is. (Inv. # G-11).

Donaldson Torit DCE- Environmental Control Booth & Dust Collector Torit ECB-4 Modules, complete with control panel Built dust booth and own lighting. Environmental Control Booth Powerful, Self-Contained Dust Collection The Donaldson Torit® DCE Environmental Control Booth, ECB Work Station, is ideal for finishing works on large and irregularly shaped parts. This self-contained working environment is specially designed to remove fine airborne dust from multiple sources without interfering with workers’ movement or visibility to ensure efficient dust control. The unique booth design is complete with lighting, sound- proofing and built-in dust collection. It requires no ductwork, and re-circulates the cleaned air for reduced energy costs. Workers inside the booth enjoy complete freedom of movement, cleaner air and excellent visibility. The powerful filtration capabilities of ECB Work Station prevent migration of dust to other parts of the plant, protecting workers outside the booth from the dust and noise generated inside the booth. Stand-alone unit for easy moving at the plant High filtration efficiency with Ultra-Web® cartridge filters Freedom of movement and improved visibility Flexibility to increase capacity Requires no ductwork Safely recirculates cleaned air for reduced energy costs

DONALDSON/TORIT - WSO 20: 1,230 CFM, 3 HP Floor Mounted Mist Collector with After-FilterSpecifications -- Filter height: 20".Complete with: -- Top-Mounted after-filter.

DONALDSON/TORIT - DRYFLO DMC-C: 3 HP Mist CollectorSpecifications -- Filter area: 13 m² (42 sq./ft.).

DONALDSON / TORIT DWST6-5 Cartridge Dust CollectorDownflo® WorkStations (DWST) fit anywhere on the plant floor and apply NO restrictions to worker movements or visibility. The full line of WorkStations are designed specifically for those in-plant areas where dirty and/or noisy operations are out in the open—grinding, sanding, chipping, batch mixing or welding. The DWST delivers exceptional performance in metalworking, woodworking, and process applications where high filtration efficiency and ledge less construction is often a requirement. Specifications: -- (5) Module System, each with 10 HP motor, 7,000 CFM. -- (4) Ultra-Web cartridges. -- Pulse-cleaning manifolds and ventures, (2) dust drawers. -- (1) Acoustical panel per module. Louvers mounted on lower section of unit.Includes: -- (1) IEC control panel includes 460-volt motor starters, circuit protection for each motor, transformer, programmable logic controller. -- Magnehelic gauge mounted in a panel door, start/stop buttons, and a through-the-door disconnect switch. -- Pulse cleaning can be continuous or after-shift. -- All components are IEC rated. The enclosure is rated Type 12. -- 1"; Compressed Air Regulator with Filter Separator and Gauge, Black Iron Fittings, and Black Iron Piping Required for Cleaning System. -- Provides a 1"; Common Connection Point for Design Shutters to Tie into with Existing Compressed Air System.

Donaldson Torit Modular Baghouse Model 162MBT10 24,000 CFM

Dust collection with baghouse

24 AN Valve | Serial #: 2071507 | 460V 3PH | 30HP Motor

YORK-DONLEE 200HP propane gas boiler and associated controls. Boiler was operated only 5 years. Boiler has been drained and taken care of and removed from service along with the condensate tank. Old controls are available, but suggest purchasing new controls.  See pictures for all information regarding pressure, etc. Offered as-is/where-is with no warranties or guarantees, and loaded on your truck. Price $22,000. OBO.

DOOSAN portable lighting with only .2 hours.

DOUCET - BT 3-48: Return Conveyor for Edgebanders with Panel TurnerFor Left Hand feed Edgebanders with: Right Hand Return Conveyor. -- Receiving table: 66" L x 84" W; Return Conveyor: 48" W; total length: 24'. -- Unit can process: 48" Wide x 108" length. -- Minimum part capacity: 4" x 12" For the side turner.Options Included -- Side mounted "PT 90" Panel Turner; 22" W x 89" L. -- Panels are turned 90° as part of the transfer process between the Receiving & Return Conveyor, eliminating panel overhang.Actual Model: BT3-48-H30-5-32-D-PT

DOUCET FB-36-5-16-G Return Conveyor -- Designed for: Shaping Sanding machines and Edge Foilers with a continuous transfer process. -- Left hand return with: 60" W x 36" L Receiving conveyor / transfer table; 36" W x 11' L return conveyor. -- Feed rollers driven by: DC Variable speed motor; helps guide the part onto the receiving module. -- Polymer belts side shift panels to: Return Conveyor quickly and efficiently.

DOUCET - MSB-ESB 16-G: Panel Sequencer (Edgebander & similar application)Model "ESB" increases the productivity of your Edgebander by: Maintaining the gaps between parts to their absolute minimum. -- It allows the Operator to stage several panels in its bottom feed magazine. -- Panels are released automatically as soon as the preceding one clears; the "no feed zone" on your Edgebander or feed end-to-end on your Shaper-Sander.Specifications & Operation -- "ESB 16" Features: 16" Wide x 54" long feed belt. -- Suitable to feed panels ranging from: 4" x 10" to 24" x 84" at up to 100 FPM. -- Feed hopper offers: Reserve capacity up to 12" thick or a max.150 Lbs. -- Sequencing of panels "fed lengthwise" is fully automatic. -- Sequencing panels "fed width-wise" or of panels larger than those described above require the assistance of an Operator. -- This model is made for left-hand feed EdgebanderNOTE: New feed roller installed lately at ...$ 1,600 cost.