Armstrong For Sale

Morgan Scragg. Located in ID. #C963

Morgan 2Saw 16' Trimsaw Line. With in-feed Coveyors. Located in GA. #C959

Mogan Chop Saw 5 hp Good Condition, Lightly Used

Morgan Chop Saw 10 hp

Morgan Manually Operated Chop Saw with 24" Saw Blade, 14" x 10' Gravity Infeed Rollcase, 14" x 15' Gravity Outfeed Rollcase with Mechanical Stops

Morgan Tie Chop Saw System with 26" Dia Saw Blade, Electric Motor Drive, Electric Over Hyd Cut Control, 12" x 8' Hyd Driven Infeed Rollcase, 12" x 14' Powered Outfeed Rollcase with Visual Stops, Electrical Control Console & 7 1/2hp 3 Phase Hyd Power Pack

This used Morgan Single Head Resaw, paired with Cooks sharpening tools, is a complete set ready to enhance your sawmilling operations. It features a 27 HP Kohler engine and includes a return belt, ensuring efficient and smooth operation. Additionally, the package comes with 50 bands in total; 25 used bands and another 25 that have been sharpened three times, providing a balance of ready-to-use and spare options. The set is complemented by Cooks sharpening equipment, including a sharpener, roller, and setter, powered by a convenient Dewalt battery system for reliable, on-the-go performance. This equipment combination is in very good condition and ideal for businesses seeking a robust and cost-effective resawing solution. Being sold as a complete set, it provides everything needed for immediate operational capability.

2024 Morgan 2 Saw Trimmer 16’. Like new never installed. Includes 12’ 6” deck and 10’ 6” deck. Hydraulic power pack.

Morgan Scragg Mill 40” blades, 50 hp motors, 5 hp hydraulic pack Hydraulic setworks, live deck controls, hydraulic feed and off bearing belts Will cut max 15” diameter and has dogs every 9’ Very low hours with all original belts, etc. 20’ and 33’ scragg decks available

Morgan Scragg Deck 3’ x 21’6” scragg deck Heavy 4 x 8 tubing frame Avg 48” tall Motor and drive Heavy built, low usage, ready to load

MIC (Morris Industrial) Bar Type Unscrambler. No drive. Very nice. Length: 22' 1"; Width: 11' 3"; Height: 8' 2"

MSI - AT-643: Horizontal Auto-Tie Baler with Infeed ConveyorSpecifications: -- 60" x 43" Feed opening. -- Bale size: Variable x 43" x 30". -- Bale weight: 900 - 1,700 Pounds; OCC" 5 TPH. -- Cylinder: 7"; repacked. -- Motor: 40 HP. -- New hydraulic pumps; new "T-1" Liners on floor & platen. -- 60" Wide x 25 feet long slider bed; conveyor included.

MTA DE 0175 Refrigerated Air DryerR134A refrigerant offers high overload capacities.Easy to use and maintain.Operation in high ambient of 115°F.Lowest dew point provided by thermal storage acts as a buffer covering sudden load variations.Stainless steel demister removes condensed moisture at all air flows.Environmentally safe – no risk of cross contamination between refrigerant and compressed air

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

MULTIQUIP GENERATO MODEL DH-04801 45KW GENERATOR IS ON A 2004 DUOLIFT TRAILER WITH ON BOARD FUEL TANK LOW VERY QUIET GENERATOR

Multitek 40KW Generators: 40KW 3-phase 240 volt generators (8 available). All have approximately 27 hours of testing. These are new units available for $16,000 each.

With bag house / LMC Pulse Jet filter model 81FSD12 Low pressure Cyclone model LP-961 Includes rotary airlock and rain cap and stand WT 5,914 Low pressure cyclone model LP-48 Includes rotary air lock and stand wt 1,466 100 horse power fan.

MURPHY-RODGERS - MRSE-14-RAL: Baghouse Dust CollectorSpecifications: 14" Inlet dia.; 4,836 CFM; (63) bags with: 520 Sq./ft. filter area; 9.3:1 air-to-cloth ratio; 20 HP fan motor; primary separator built into unit; secondary separation of fine particles by filter bag section; -- Equipped with: -- Rotary Air Lock. -- Fully automatic shaker controls with: Electric shaker as standard; consists of panel box with shaker starter; transformer for 115 V circuitry; solid-state timer for fan deceleration & shaking cycle. -- All necessary relays and internal wiring inside the panel box.

MURPHY-RODGERS - HEC-216-S/10: 33,000 CFM Continuous Duty Automatic Self-Cleaning Pulse Jet Baghouse Dust CollectorEquipped with: -- (216) 5" Dia. x 10' L Cloth filter bags for a total of: 2,827 sq/ff. of filter area. -- (2) 42-1/2" W x 68" H & (2) 40-1/2" x 68" H Top access doors. -- (3) Front & (2) side 27" W x 54" H Filter access doors. -- (2) Square cone bottom hoppers each with: 25" x 25" Discharge openings. -- System utilizes: (2) 4-1/2’ x 6’ x 4’ H Waste containers (NOT included). -- CHICAGO 100 HP - 1,780 RPM Roof Mounted Blower with: 41"; Dia. inlet. -- Motorized dampers for winter & summer modes. -- Winter mode: Directs air back into building, reducing heat loss. -- Summer mode: Directs air outside, cooling building. -- Electrical controls (as pictured). VFD needs to be repaired or replaced.Complete with: -- Spare Filter Bags.NOTE: Installed Used in 2016 with "New" 100 HP motor, new bearings in blower & "New" spring mounts.

MURPHY-RODGERS MRZ 17/16L Interior/Open 6 Bag Dust Collector with Auger and Rotary Air Lock General specs: Approx. 7,600 CFM @ 8" SP. (6) top filter bags @ 24" dia. by 72" long. (6) bottom disposable plastic dust storage bags. -- Fan/Motor: 25 HP BALDOR TEFC motor direct driven fan with electrical starter. 17" diameter inlet, with lifting hooks. The bag collector motor is brand new and has never been powered on or fired up. -- Comes with: Main approx. 17" dia trunk line, shut-off, and Quick clamp removal for filter and plastic bags. -- All steel construction with rugged support legs. Air Deflectors allows operator to adjust the air flow and amount of waste evenly into the 6 waste bags. -- Note: NFPA 664 (Fire Code) states that a max. of 5,000 CFM is limit allowed for indoor enclosure-less dust collectors.