Armstrong For Sale
.gif)
3626 Results Found
$ 12,000
36" SALEM carriage with NO setworks but with 'Cam' box. ADD YOUR OWN SETWORKS. 60' rail included; 4 sets of wheels-good condition; 3 headblocks spaced 72" & 60" on centers; cant pushers; topdog; frame 16' OAL. Headblocks-good condition. Price $12,000.00
$ 30,000
Features 2 equidistant shifting saws ball bearing shifting collars Temposonic hydraulic linear positioned saws Knurled and chromed feed rolls blade access on left belt tailing device dead roll infeed Programmable push button controls and jog to position controls arbor motor hydraulic unit
$ 45,000
Thin kerf top arbor gang with infeed and outfeed. Features 300 HP arbor motor access door on left splined arbor guide lube system babbitt pot Salem double side guide milling machine lots of guides lots of saws soft starters control console Infeed features: 3 cross chains cant turner crowder roll
Call for Price
Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed
$ 6,500
bar type log turner, used with 42" carriage, hyd drive, good working condition
Call for Price
$ 125,000
Recently Refurbished 22" Ring Debarker New Controls Optional 22" Metal Detector
Call for Price
Call for Price
Salem 6" x 48" Gang Edger w/10' Powered Infeed Rollcase, Knurled Chrome Feed Rolls, Overhead Pneumatic Hold-Down Press Wheels, Hyd Driven, Material Positioners, Hyd Operated 19" Saw Shifting System, Laser Light Shifting System, (1) Laser Light, Controls, 75Hp Motor, 10Hp Hyd Power Pack, T S Manufacturing 24" x 20' Pneumatic Lateral Shifting Edger Outfeed w/(5) Overhead Powered Feed Rolls & No Drive
Call for Price
Salem 6' Headrig This saw was dismantled in 2017 and put in a container. It was never reinstalled. The container is available if someone wants it.
Call for Price
Salem 35" Ring Debarker 5-Knife Current MCC will be used with another line. They may have an MCC to go with it. Indeed/Outfeed Rolls may be optional
$ 19,500
Salem 3-Block 36" Hydraulic LP Carriage, S/N 160799-93, built in 1999. Appears in very good condition. equipped with good rail, pantograph, cant flippers, on-board Brownsville turners, center knee tong-dog, chromed face and bed plates, 13" UHMW plastic insert wheels, on 60" track centers, and 20hp Inovec hydraulic power unit. Overall carriage width is 89". Bunk spacing is 108" and 75" left to right. Overall bunks measure 200". Top of bunks to top of rail is approximately 27-1/2". No setworks computer included. Inventory No.12392. Price, FOB, Portland, OR --------------------------------------------$19,500.
$ 29,500
One (1) Used Salem 6’ Right Hand Air Strain Bandmill, S/N 8564879. Was last installed as a resaw and is in very good condition. Includes pressure guides, solid top wheel with 7/8” thickness at edge of rim and 11” wide. Inventory No. 11082. Price, FOB Portland, OR ---------------------------------------$29,500.
Call for Price
Samuel Rogers 66" Knife Grinder
KENT - Single Head, ResawSpecifications: -- 15 HP Motor. -- Blade size: 168"; x 1"; x 0.035"; 2TPI. -- 6" Wide feed belt. -- Operational working heights: 1/4" minimum cut to 8"; maximum. -- Feed speed: 20 - 150 Feet per minute.
Call for Price
Call for Price
Sanborn 6' Left Hand Double Cut Band Head Rig on 17 Degree tilt
Call for Price
Sanborn Machinery RH 8 Saw Drop Saw Trimmer with Hydraulic Drive
Call for Price
Sanborn 5' Band Head Rig Air Strain w/ 100HP Electric Motor
$ 90,000
Like new 36" vertical linebar resaw. COMPLETE WITH RUN AROUND SYSTEM. Saws 14"W x 16"H x 12'L cants (can be extended). Operator's cab w/ controls. Elec. sys. w/ starters, prewired mach. Pre-plumbed hyd. sys. 20HP hpu, sub-steel, ten saws incl. Mach. disassembled. Crane additional. $90,000. OBO