American For Sale
3704 Results Found
Call for Price
$ 32,500
HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.
$ 20,000
HMC AC-40 4 head-block carriage, Silva-Tech set-works with spare parts, air dogs, husk has 48" dia bottom blade and 36" dia top saw, includes complete mill package including 42" chain Log Turner (Sawmill) and nose skids, working condition
$ 7,500
$ 20,000
HMC HC-40, serial #330-1982, 4 head-block carriage, 110 volt electric over air set-works, 50 hp carriage drive, air powered dogs, 40' long track, was used with band head, includes cab, controls and log turner, complete unit ready to operate and in good condition
Call for Price
HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes. New electronic setworks, (no conveyors), excellent stand alone machine, Great for relcaiming Slabs (ref #200)
Call for Price
HMC AC40 Carriage (Sawmill) Rebuilt AC40 Board Dog Carriage, 4 head blocks, 42” opening, set shaft carriage. Factory rebuilt with new equipment warranty. Photos are reference only
Call for Price
HMC HD40 Carriage Drive (Sawmill) Rebuilt HD40 Carriage Drive, 50hp motor, closed hydraulic system, Factory rebuilt with new equipment warranty. Photos are reference only
Call for Price
HMC ET10 Trim Saw Rebuilt ET10 Two Saw Trimmer. LH Construction, 6’-16’, Updated PLC setworks and starter panel. Factory rebuilt with new equipment warranty. Photos are reference only
$ 8,500
HMC 3 strand log deck, H-78 chain, stop-load for debarker, 10' 6" wide x 19' long, Tulsa Winch electric drive, very good condition
Call for Price
HMC V-2110 Slant Track Debarker w/60Hp Motor on Head, Onboard Hyds, Controls & Wood Constructed Cab S/N 1827-05 w/Patz 50' Barnsweep, Electric Drive, Counter Clockwise Rotation (20' Section Has A Cover), 10' 8" x 30' 4 Strand Log Deck w/Stop N Load, Hyd Drive, Attached Catwalks, 11" x 27' Ladderback Chain Conveyor w/Hyd Driven Gear Drive & 25Hp Hyd Power Pack
Call for Price
$ 45,000
HMC 4 head-block circle mill, complete mill package, includes husk w/ top saw, carriage drive, operator cab, and all controls, price includes BRAND NEW set-works and mill gone through shop and ready for production
$ 5,250
Call for Price
HMC MDS-50 Left Hand Drop Saw Trimmer For trimming Boards, Cants, or Ties up to 8" thick and will pass 10" Material. Feed Chains are 81X chain driven by a 3HP Variable Speed Motor with hold downs, each 24" saw is belt driven by 10 HP motors, starters, and fuses are mounted to the Machine in a Nema 12 Enclosure. 0',2',8',10',12',14', and 16' saw units, set up to pass 20' long material. Automatic length trimming with manual override is controlled by programmable control, powered even-ender rolls with a 2 hp drive, and includes one stationary stop gate. Front, back, and top guards are included, and an Automatic shutdown if a door is open while the machine is running. Includes spacers to raise the machine. 360/440 volt
Call for Price
HOCKER POLYTECHNIK - MultiStar Series: Pulse Jet Baghouse 33,000 CFM (56,000 cbm/Hr) based on 5.2 to 1 Air-to-cloth ratio (FPM: Average air velocity thru filter media) with: 6,345 Square feet of filter area. -- Filtration: Filters are automatically cleaned by Pulse-Jet system based on supply of: 1" Dia. dried clean compressed air line from Plant. Cleaning automatically controlled via timed cycles or by the Delta P, which is the differential pressure across the filter bags. -- Supplied with: (4) HOCKER DER - 040/45022 Radial BI fan; each directly driven by: 30 HP - TEFC 3,600 RPM High efficiency motors; mounted on the clean air side. Rated for a total of: 33,000 CFM at 16" SP (4,000 Pa). Fan inlets are: 18" (450 mm) Dia. each. Non-return flap camper on the outlet side. -- Includes Electrical panel with: PLC Controls; explosion relief panels; sprinkler heads in the clean air plenum; ATEX approved construction with 11-gauge electroplated galvanized steel shell with: Clean air outlet not returned to plant. -- Equipped with: (1) HP Rotary Air Lock. -- Control - SIEMENS - SIMATIC TPI200. PLC Controller housed in a floor-mounted central control panel with: Modem module for allowing HOCKER online access to assist in program changes; 12" TFT color, touchscreen display.All starters & contacts for included motors.Pictorial guided navigation and fault messages are displayed in text.Graphic images, curves, bar diagrams, parameter adjustment settings, and fault report.FI MF 22.0 kW SPS Ctrl.: Allows startup of several fans, one after the other. -- VFD Drives on each motor with: Automatic motor tuning; automatic startup; min./max. speed limits; DC brakes; operating hours meter. -- Includes: Access ladder to upper catwalk and exterior pipe; Heavy-Duty galvanized for outdoor operation. -- Professional dismantling & transportation available upon request.
Call for Price
$ 14,600
HOLTEC Lumber Trimmer. Manually trims bundles of lumber. Trims one end only. Manual setting of lumber bundles required. Bar & guard replaced; hydraulics tested; support frame, including steps, sand blasted and painted; electric motor drive checked; air cylinder and up-down of bar tested; manually operated saw assembly moves about 12". Offered as-is/where is. Price $14,600.00
$ 5,500
$ 16,800
HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. Specifications: -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 ° to 7° -- Electroni display of cutting height -- Blade Capacity 4270 X 25 X 0.89 mm. -- Wheels Diameter 725 mm -- Return conveyor on machine top