Equipment For Sale

BIESSE - ROXYL 5.5: Edgebander (w/Premill & Corner Rounding)SpecificationsEdgebanding Cap. - Edge thickness for strips: Min./max.: 0.4 - 22 mm (0.02" - 0.87"); coiled material from: 0.4 - 3 mm (0.02 - 0.12"); panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width; Min.: 85 mm (3.34"); workpiece length min.: 140 mm (5.51"); feed speeds: 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM). Machine Interface -- "Roxyl-Matic" Automated machine setup; MS/Windows XP Operating System; floppy drive; 4 GB HD; USB port, keyboard, and mouse interface. -- Flat-Screen (17") with Color graphics interface: Programs can be easily created & recalled at will; graphic interface makes programming easy: Icon of each unit may be brought up on the screen to show the Operator the status of the unit & parameters, which can be programmed; Edgebander may be operated manually when required, without necessity to write a program.Machine Infeed Configuration -- Premilling Station "FL-502". (2) LH & RH Rotating NC controlled spindles with: Automatic center positioning. -- Anti-Adhesive: "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to workpiece surfaces. -- Infrared Heating Lamp. Preheating workpiece edge to ensure best possible surface adhesion quality of edgebanding material. -- Edge Magazine. Automatic for processing coiled & strip edgebanding material. -- Pressure Section Servo controlled programmable pressure section with: (1) Large driven roller and (4) idle rollers.Gluing System -- EVA (Hot Melt) "QM-705" Quick premelting granulate with: Glue roller applicator to cover conventional edgebanding material. Workstations -- End Trimming Unit "IN-801": Front & Rear trimming motors; unipoint swivel: 0° - 15° Bevel; programmable pneumatic change-over from flush to bevel. -- Rough/Flush Trimming Unit "RS-701": Top/Bottom pre- or flush trimming motors. -- Flush/Bevel/Radius Combination Trimming Unit "RF-400": Servo controlled: (2) Servo motors (one for horizontal tool position; one for tool up/down position); uses combination bevel/radius/flush insert knives; prepositioning of motors by pneumatic air cylinders. -- Corner Rounding Unit "CR-202": (2) Motors for front/back corner and upper & lower edge profiling. -- Profile Scraping Unit "RBK-503": Top/Bottom 2-axis NC programmable knife positioning (i.e. 2 - 3 mm radius) for PVC edges. -- Glue Scraping Unit "RCC-701": Flat top/bottom; digital positioning indicators; pneumatic controlled for in/out position. -- Buffing Station "SP-501" Top & Bottom buffing motors with: 150 mm (6") Cloth buffing wheel diameter; adjusts in multiple directions. -- Edge Reactivation Unit "PH-700": Top/Bottom hot air blowers to restore original color to profile scraped PVC edge material.Complete with: -- Top Pressure Beam with: Driven flat belt & programmable height positioning.Includes: Multi-Tap Transformer. - Sound Hoods with interior lights. - Outboard panel support.

BIESSE - ROXYL 5.5: Edgebander (w/Premill & Corner Rounding)SpecificationsEdgebanding Capacity: Edge thickness for strips min./max. 0.4 - 22 mm (0.02" - 0.87"); coiled material from: 0.4 - 3 mm (0.02 - 0.12"); panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width min.: 85 mm (3.34"); workpiece length min.: 140 mm (5.51"); feed speeds: 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM). Machine Interface -- "Roxyl-Matic" Automated machine setup, MS/Windows XP Operating System; floppy drive; 4 GB HD; USB port, keyboard, and mouse interface. -- Flat-Screen (17") with Color graphics interface: Programs can be easily created & recalled at will; graphic interface makes programming easy: Icon of each unit may be brought up on the screen to show the Operator the status of the unit and the parameters, which can be programmed; Edgebander may be operated manually when required, without necessity to write a program.Machine Infeed Configuration -- Premilling Station "FL-502": (2) LH & RH Rotating NC controlled spindles with automatic center positioning. -- Anti-Adhesive "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to work piece surfaces. -- Infrared Heating Lamp: Preheating workpiece edge to ensure best possible surface adhesion quality of edgebanding material. -- Edge Magazine: Automatic for processing coiled and strip edgebanding material. -- Pressure Section: Servo controlled programmable pressure section with: (1) Large driven roller and (4) idle rollers.Gluing System -- EVA (Hot Melt) "QM-705" Quick premelting granulate with: Glue roller applicator to cover conventional edgebanding material. Workstations -- End Trimming Unit "IN-801": Front & rear trimming motors; uni-point swivel: 0° - 15° Bevel; programmable pneumatic change-over from flush to bevel. -- Rough/Flush Trimming Unit "RS-701": Top/Bottom pre- or flush trimming motors. -- Flush/Bevel/Radius Combination Trimming Unit "RF-400": Servo controlled; (2) Servo motors (one for horizontal tool position, one for tool up/down position); using combination bevel/radius/flush insert knives; pre-positioning of motors by pneumatic air cylinders. -- Corner Rounding Unit "CR-202": (2) Motors for front/back corner and upper & lower edge profiling. -- Profile Scraping Unit "RBK-503": Top/Bottom 2-axis NC programmable knife positioning (i.e. 2 - 3 mm radius) for PVC edges. -- Glue Scraping Unit "RCC-701": Flat top/bottom; digital positioning indicators; pneumatic controlled for in/out position. -- Buffing Station "SP-501" Top & Bottom buffing motors with: 150 mm (6") Cloth buffing wheel diameter; adjusts in multiple directions. -- Edge Reactivation Unit "PH-700": Top/Bottom hot air blowers to restore original color to profile scraped PVC edge material.Complete with: -- Top Pressure Beam with: Driven flat belt and programmable height positioning.Includes" Multi-Tap Transformer. - Sound Hoods with interior lights. - Outboard panel support.

BIESSE - ELIX B: CNC Bore, Glue, and Dowel InserterBIESSE Drill & Dowel Inserter features: Single-spindle for drilling; dowel insertion unit; glue injecting unit installed on a carriage moving in the X-axis.Position for drilling dowel insertion provided through simple programs through the NC control or third party software. Operator Control interface is: Intuitive, user-friendly, and very easy to use. -- Specifications Max. parts length: 1,300 mm (51";); min. parts length:120 mm (4.7";); parts thickness: 10 - 40 mm (0.4"; to 1-1/2";). -- Positioning Speed "X" & "Y" Axis positioning speed: 40 MPM (131 FPM); "Z" axis has manual adjustment with: Max stroke of 40 mm (1.57").The working units travel: Precision machine ground ball screws; powered by brushless AC Servo motors. -- Worktable(4) Working Zones with: Center fence position in up mode; (2) large work zones in down position; (4) holddown cylinders. -- Boring UnitDrilling Uunit. High-speed unit with: 6,000 RPM spindle; max. drilling depth of 30 mm (1-1/4"); max. drill bit dia.: 12 mm (0.47"); manual adjustment of depth with: Digital indicator. -- Dowel Insertion UnitDowel prepositioning ensures: high repeatability of inserting dowels for each hole; distance between the dowel insertion unit and the drilling spindle: 32 mm (1.3") for simultaneous drilling; dowel insertion when holes are spaced at 32 mm; standard dowel dimensions: 8 x 30 mm; Max. dowel projection: 14 mm (0.551"). Glue Tank: Holds up to 8 liters (3.1 gallons) of glue; max. glue density: 900 CPS. - Glue inserting unit: Flow sensor and electronic adjustment of the amount of glue. -- Operator InterfaceIndustrial Numerical Control with: Extremely simple Program Editor; macro & parametric programming. Icon driven. -- Includes: Original Factory Machine Documentation. -- Actual Model: BIESSE ELIX B

BIESSE ROVER - A 3.30: CNC Machining Center (w/ATC/Boring) -- SPECIFICATIONSWorking cap. - "X" Axis: 118" (3,000 mm) any unit; "Y" Axis: For routing, 45.2" (1,150 mm; "Y" Axis for: Boring; 49.6" (1,260 mm); "Z" Axis stroke: 7.8" (198 mm); max. material thickness: 5.9" (150 mm). -- Positioning Speed Both "X & Y" Axis is: 262 FPM (80 MPM); "Z": 111 FPM (34 MPM); helical rack & pinion drive: On "X" axis; precision ball screw on: "Y & Z" Axes. -- Worktable (6) Support rails with: (3) Vacuum pods per rail; (6) pop-up back stops, (4) pop-up side-stops; (2) independent working areas.Prepared for (optional) "quick fit" vacuum outlets for: Optional clamping of small or awkward shaped parts; each work zone with (1) "Quick connect" vacuum outlet: For custom vacuum fixtures. -- Boring Unit(14) Independent vertical boring spindles forming an L-configuration with: (7) Spindles in "X" Axis & (7) spindles in "Y" Axis.(6) Horizontal spindles with: (2 + 2) in "X" axis; (1 + 1) in "Y" Axis; (1) "X" Axis grooving saw for: Max. 120 mm dia. blade. -- Machining (1) 9.5 HP (7 kW) Vertically mounted HSD electrospindle router with: HSK F63 Adaptor.Inverter driven 1,000 - 24,000 RPM with: Max. torque from 12,000 - 24,000 RPM. (1) 18-Position "Ride-Along", "on the fly" automatic tool changer. -- Operator & Machine ControlPC Front-End with: BIESSE "XP600" + Windows "XP" + BIESSE "WORKS" Operating System.INTEL "Celeron" 2.0 GHz Processor; 4 GB Hard drive; 15" color monitor; international keyboard; soft touch keypad & industrial mouse; RS-232 serial port; (1) 1.44 MB floppy disk drive.BiesseWORKS: An easy CAD program that can be done from the office or at the machine; Operating System: Real-Time multitask processing; programs can be transferred via diskette or downloaded by wire. -- Complete with: (1) 250 M³/Hr Vacuum Pump; 11 KVA stabilized autotransformer for voltages between: 220 - 600 Volts. Equipped with: Centralized manual Lubrication System for guides & ball screw; built-in 1,500 W air conditioner for constant temperature & dust-free environment. Emergency stop rope & sound absorbing protective head enclosure with: Debris curtain around bottom edge. -- Actual model: BIESSE ROVER - A 3.30

BIESSE - ROVER A 3.65 FT: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 21.3' with (2) 10' Long Flat Table Workstations: "GANTRY TYPE" "Phenolic" Table machine for Nested Base Manufacturing. -- Working Capacity"X" Axis: 254" (6,450 mm); Any unit; "Y" Axis: For routing; 51" (1,290 mm); "Y" Axis: Vertical drilling, 57" (1,436 mm); "Z" Axis: Stroke, 7.9" (200 mm); max. material thickness: 6.2" (160 mm). -- Positioning Speed"X" & "Y" Axis: 262 FPM (80 MPM); "Z" Axis: 82 FPM (25 MPM); helical rack & pinion drive on "X" Axis; ball screw: "Y" & "Z" Axis. -- WorktableFlat table designed for: "Nested Base Manufacturing", (2) independent vacuum zones and working areas.(16) External pop-up reference pins with: (2) On RH side; (2) on the LH side; plus (6) on the front of the table & (6) on the back of the table.Prepared for (optional); "Quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick connect" vacuum outlet for custom vacuum fixtures. -- Boring UnitBoring Head with: (7) Independent vertical boring spindles in "X" axis. -- Machining(1) 16.1 HP (12 kW) Liquid-cooled electrospindle with: HSK F63 Adaptor; 14 kW inverter; 1,000 - 24,000 RPM with max. torque from: 12,000 - 24,000 RPM.(1) 10-Position "Ride-Along"; gantry mounted automatic tool changer. -- Operator InterfacePC Front-end with: BIESSE "XP600" + "BiesseWorks" + Windows "XP Professional" Operating System; 15" color monitor; international keyboard; soft touch keypad; Industrial mouse; RS-232 serial port; (1) 1.44 MB; CD ROM disk drive.BiesseWorks: Easy Operating System for real-time multitask processing; programs can be transferred via diskette or downloading by wire (is possible).Components housed: 1,500-Watt Air conditioner control cabinet for constant temperature control & dust free environment. -- Complete with:(1) 300 cbm/Hr Vacuum pumps; centralized manual lubrication system for guides & ball screw; safety mats; Emergency Stop rope; protective head enclosure with debris curtain around bottom edge. -- Actual Model: BIESSE ROVER A 3.65 FT

BIESSE AKRON 1130 J EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- SpecificationsWorking Capacity Edgebanding thickness: 0.4 - 3 mm Capacity; min. panel width: 85 mm (3.3"); min. panel length: 140 mm (5-1/2"); panel thickness: 10 - 50 mm (0.39" - 1.96"). - Feed Speed: 9 MPM (30 FPM).Front-End Equipped with: -- Premilling Unit "RT01" with: "Auto Set" Automatic intervention; Strip & Coil Edge magazine; automatic shear type guillotine. -- Hot Melt Glue System: Teflon coated glue pot; digital thermostats with automatic kick-down when machine is in idle mode.Pressure Section with (1) large dia. "non-stick" coated drive roller & (1) Teflon plated idle rollers Workstations: -- End Trimming Unit IT01. Single motor end trimming unit with: Linear bearing support. -- Premilling Unit "RT01". Asymmetrical diamond tools; max. height = 55 mm. -- Tilting Fine Trimming Unit "RF01". Multi-profile cutters for: Flush trimming; 25° chamfer & 3 mm radius trimming. -- Corner Rounding Unit "AR01". Single motor corner rounding unit with: 3 mm Radius tooling. -- Profile Scraping Unit RB01: Top & bottom 3 mm thick PVC banding. -- Flat Scraping Unit "RC01": Top & Bottom glue scraping unit. -- Buffing Unit SZ01: Top & Bottom buffing unit; 1/2 HP (0.37 kW) - 2,800 RPM motors; units tilt 0° - 30°.Operator & Machine Control -- BIESSE "SMART TOUCH 7": User-Friendly touchscreen control panel for workstations.Complete with: -- Insulated sound enclosure over all trim stations with: Split dust hood; viewing windows.

BIESSEROVER B 4.40 CNC MACHINING CENTER (W/ATC/BORING)Specifications: -- Working cap "X" Axis 143.3" (3,640 mm), "Y" axis 51.4" (1,306 mm), "Z" axis stroke is 8.8" (225 mm), max. material thickness 7"(180 mm). -- Positioning Speed: "X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM); helical rack and pinion drive on "X" axis & ballscrew on "Y" & "Z" axis. -- Work Table: (6) Panel support rails with (4) lifting bars to assist with panel loading/unloading, digital display readouts for rail & pod placement according to the programs, (3) Vacuum pods per panel support, (2) independent working areas with pop-up locating pins for positioning of parts on the worktable -- Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with (1) "quick connect" vacuum outlet for custom vacuum fixtures. -- Boring unit: (24) Independent vertical boring spindles with (14) spindles in "X" axis & (10) spindles in "Y" axis, (10) horizontal spindles with (3+3) in "X" axis & (2+2) in "Y" axis, (1) "X" axis grooving saw with 120 mm dia blade. -- Machining unit: (1) 16 HP (12 kW) Vertically mounted HSD "Electro-spindle" router with ISO 30 adapter, inverter driven 1,000 - 20,000 RPM with max. torque from 12,000 - 20,000 RPM -- (1) 12-position ride-along ATC for "on the fly" tool change. -- Operator & Machine Control: PC Front End with: Biesse "XP 600" + BiesseWORKS Advanced + Windows "XP" operating system, INTEL "Celeron" 2.0 GHZ processor; 4 GB Hard drive; 15" color monitor, international keyboard, soft touch keypad & industrial mouse, RS-232 serial port, USB ports, CD ROM & 1.44MB disk drives -- Separate control panel with built-in 1,500 W air conditioner for constant temperature & dust-free environment, 11 KVA Stabilized auto-transformer for voltages between 200 - 600 Volts. -- Complete With: (1) 100 M3/Hr Vacuum Pump, Centralized manual lubrication system for guides & ball screw, emergency stop rope, safety mat protection barrier & sound absorbing protective head enclosure with debris curtain around bottom edge.

BIESSE BIESSE ROVER 24 FTS FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications4' x 10' "Matrix" Grid phenolic surface table for "Nested Base Manufacturing". -- Working Cap.:"X" Axis is 122" (3,100 mm);"Y" axis 49.2" (1,250 mm); "Z" axis stroke is 9.8" (250 mm); max. material thickness of 6.1" (155 mm). -- Positioning Speed: "X" & "Y" Axis is 328 FPM (100 MPM); Z-axis 98 FPM (30 MPM); "X" axis uses a helical rack & pinion system; "Y" & "Z" axes use precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Work AreaFlat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas.(14) External pop-up reference pins with: (6) Pins on the front of the table: (4) On the back of the table; (2) on the RH side; (2) on the LH side.Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit(1) 2.5 HP (1.7 kW) - 4,000 RPM Motor; (14) independent vertical spindles: (7) In "X" axis & (7) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis & (1 + 1) in "Y" axis; (1) 120 mm dia. "X" axis grooving saw.(1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC. -- Machining(1) 10.2 HP (7.6 kW) Air-cooled electro-spindle with: HSK F63 Adaptor; variable speed from 1,000 - 24,000 RPM. -- Operator & Machine ControlPC Front-End with: NC 1000" + WINDOWS "NT" Operating System; 17" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. -- Complete with:(1) 250 CBM/Hr Vacuum Pump; universal Autotransformer for voltages between: 200 - 600 V, 50/60 Hz; includes: Manuals, documents, safety mats, fencing. -- Actual Model is: BIESSE ROVER 24 FTS.

BIESSE ROVER A 1536 G FT: Flat Table Machine with C-Axis -- Specifications5' x 12' "Matrix" grid Phenolic surface for: "Nested Base Manufacturing". -- Working Capacity"X" Axis: 148.2" (3,765 mm); "Y" Axis: 62.4" (1,585 mm); "Z" Axis stroke: 12.8" (325 mm); max. material thickness: 6.2" (160 mm). -- Positioning Speed"X" & "Y" Axes: 197 FPM (60 MPM); "Z" Axis: 98.4 FPM (30 MPM).All axes movement on precision linear guides & ways; controlled by digital, brushless AC Servo motors. - All motion components are maintained by an automatic lubrication system."X" & "Y" Axes: Use precision rack & pinion system; "Z" Axis uses precision ball screws. -- Work AreaFlat table design with: HI-FLOW, Multizone Matrix grid Phenolic surface for: "Nested Base Manufacturing"; automatic NC controlled zoning of the vacuum table with: (9) Individual zones.(2) Pneumatic "side" pop-up reference stops; (4) pneumatic "back" pop-up reference stops; (6) pneumatic "front" pop-up reference stops.Prepared for (optional) "quick fit" vacuum outlets: Optional clamping of small or awkward shaped parts; "quick connect" vacuum outlet: Custom vacuum pods & fixtures. -- Boring Unit(1) 2.5 HP (1.7 kW) Motor; variable speed up to 6,000 RPM; BH-40L Boring block with: (29) Independent vertical spindles; (15) in "X" axis; (14) in "Y" axis.(10) Horizontal spindles with: (3 + 3) In "X" axis & (2 + 2) in "Y" axis; (1) "X" axis grooving saw with: 120 mm Dia. blade. -- Machining(1) 16.1 HP (12 kW) Air-cooled HSD Electrospindle with: HSK F63 adaptor; variable speed from: 1,000 - 20,000 RPM.(1) NC Controlled "C" axis for: 360° Horizontal operating; (1) 16-position ATC tool changer plate located at the back of the machine base.NC Controlled presetting for the measurement of the tool length. -- Operator & Machine ControlPC Front-End with: BIESSE XP 660 + BiesseWorks + BiesseNest + WINDOWS WRT Operating System15" TFT Flat screen monitor; server, full keyboard, & mouse all mounted on a mobile cart; Ethernet connection capabilities.BiesseWORKS Graphic interface makes full use of the operating methods typical of the WINDOWS operating system: Assisted graphic editor used to program machining operations; programming, and guided creation of parametric macros.Import of CAD and other external software files in DXF & CID3 format; 3D simulation of the tool path, calculation of machining time & the ability to create rotate virtual faces.BiesseNest integrated with BiesseWorks makes nesting simple & effective for every kind of shapes using parametric programs to optimize machining programs. -- Complete with:(2) 300 cbm/Hr BUSH Vacuum Pump; label printer; NC controlled label applicator; safety mats & fencing.Automatic program update according to the tool length; Automatic Lubrication System for linear guides, pads and recirculating ball screw.Universal Autotransformer for voltages between: 200 - 600 V - 50/60 Hz; Teleservice capabilities. -- Options (must be purchased separately). BIESSE Aggregate HSK F63. 36

Working Capacity: "X axis 125.9" (3,200 mm), "Y" axis 52" (1,320 mm), "Z" axis stroke 13.7" (350 mm), max material thickness 9.6" (245 mm). Positioning speed:"X" 262 FPM (80 MPM), "Y" Axis 196 FPM (60 MPM), "Z" axis 98 FPM (30 MPM) AC Brushless Servo motors with digital drive and linear guides ensure high speeds with a smooth acceleration-and-deceleration. Work Table:(6) Tube-less panel supports with lifting bars for heavy panels, (3) ATS vacuum pods per panel support (6) Pneumatic back stops, (6) pneumatic front stops, (2) pneumatic side stops & (2) pneumatic central stops. Boring Unit:4 HP (3 kW) motor with variable speed from 1,500 - 7,500 RPM; (18) "Quick Change" independent vertical spindles with (9) spindles in "X" axis & (9) spindles in "Y" axis;(8) horizontal boring spindles with (2+2) in "X" axis & (2+2) in "Y" axis;(1) 0° - 90° NC controlled "X"-"Y" Axis grooving saw for max 200 mm dia saw blade. Machining:(1) 17 HP (13 kW) Liquid Cooled "HSD" electro-spindle router with HSK F63 adaptor, variable speed from 3,000 - 22,000 RPM;(26) Total ATC positions with (1) 8-Position ATC tool plate located on the machine head for "on the fly" ATC Operator & Machine Control:PC Front End: Biesse "BH 600" + BiesseWORKS Advanced + WINDOWS "XP" operating system,15" TFT monitor, full standard keyboard & mouse, CD ROM disk drives,RS 232 & USB ports, Ethernet connection, specific function controls & and internet trouble shooting capabilities;Control cabinet with air conditioning & dust free environment. "Biesse WORKS" is a multitask operating system, input/output modules, axes override, 4-axes interpolation, diagnostic graphics aid for programming, machine data & tool management. Complete with:(1) 250 m³/Hr vacuum pump; automatic lubrication system; original documentation; hand held pendant; safety fences & mats; scrap conveyor;

BIESSE ROVER B EDGE 1667 CNC MACHINING CENTER (W/EDGEBANDING) -- Specifications:This "Bridge Gantry" machine is "IDEAL" for window, stair, door & component parts manufacturing. -- Working Field considering "all" units when Routing, "X" Axis is 265" (6,735 mm), "Y" axis is 75.9" (1,930 mm), "Z" axis stroke 13.6" (345 mm), max. material thickness when machining 9.6" (245 mm)When "Edge Banding" "X" Axis is 227" (5,780 mm), "Y" axis is 75.9" (1,930 mm), the max. banding material thickness is 2.55" (65 mm); the minimum internal radius is 30 mm & minimum external radius is 8 mm (depending on flexibility of the banding material). -- Positioning Speed: "X" & "Y" axis is 279 FPM (85 MPM), "Z" axis is 98 FPM (30 MPM); AC Brushless Servo motors with digital drive and linear guides ensure high speeds with a smooth acceleration-and-deceleration. -- Worktable: (10) "EPS" (Electronic Positioning System) Vacuum bar support rails with pneumatic lifting blades, (4) "ATS" (auto Table Setting) vacuum pods per rail; set up assistance according to the program to process.(10) Pneumatic pop-up back stops, (10) pneumatic pop-up front stops, (4) pop-up side stops, (4) pop-up/removable central stops create (2) independent work zones.Edge Banding unit:The edgebanding unit GU60C with glue pot automatically applied EVA glue to square or irregularly shaped parts as the CNC head rotates along the "X" "Y" & "Z" axis and simultaneously rotates the tooling up to 360° on a high precision "C" axis.Floating "hot melt" glue pot & application roller with separate thermostats apply glue on the panel edge.Pneumatically controlled pressure roller with manually adjustable guides for coil & strip feeding; numerically controlled with encoder that measures strip feeding process.(1) 4-Coil tape magazine with warning sensor when the end of the spool is near; edge banding unit precisely applies 0.4 - 3 mm ABS & PVC with 60 mm (2.3") max. edge height.Pneumatically activated saw blade performs the end trimming at a 35° angle for precise fitting of overlapping joints on adjoining edges. -- Boring Unit: BH17 Boring Head with 4 HP (3 kW) motor, variable speed from 1,500 - 6,000 RPM; (10) Independent "Quick Change" vertical spindles with (5) spindles in "X" axis & (5) spindles in "Y" axis.(6) Horizontal boring spindles with (2+2) in "X" axis & (1+1) in "Y" axis; (1) "X" axis grooving for up to 120 mm dia blade. -- Machining: (2) 18 HP (13.2 kW) Air cooled electro-spindle router with HSK F63 adaptor; 1,000 - 24,000 RPM. (1) NC controlled "C" axis for 360° horizontal processing.(21) Total ATC slots, with(1) 6-position ATC Tool Plate mounted on the "Y" carriage at the back of the machine & (1) 16-position ATC Changer on the "X" carriage. -- Operator Interface: PC Front End with Biesse "BH 660" +"bTouch" +"bSolid" + "bEdge" + Windows "WRT" (Windows Real Time) operating system.21" LCD monitor, CPU Intel(R) Core I5 or superior, 8 GB RAM memory, 128 SSD GB hard disk or superior. graphic card, LCD dis

BIESSE - SKIPPER 100 L: CNC Machining Center (2-Head) -- SpecificationsFlexible "Top & Bottom" Machining Center that uses an innovative Panel Handling System. -- Workable Part SizeX-Axis: 118" (3,000 mm); Y-axis: 39.4" (1,000 mm); max. part thickness: 2.4" (60 mm).Min. X-axis workable part size: 3-1/2" (90 mm); Y-axis: 2.7" (70 mm); Z-axis: 0.3" (8 mm). -- WorktableAutomatic LH Infeed Transfer Conveyor with: Belts & rollers; automatic RH outfeed transfer conveyor with: Belts & rollers; infeed/outfeed table is "robot ready". -- Positioning SpeedX-Axis: 394 FPM (120 MPM); Y-axis: 295 FPM (MPM); Z-axis: 98 FPM (30 MPM). -- Boring Units (1) Top mounted boring block: 4.2 HP (3 kW); 4,000 RPM; (29) vertical spindles; (17) spindles in X-axis & (12) spindles in Y-axis. -- (10) Horizontal spindles: (4 + 4) Spindles in X-axis; (1 + 1) horizontal spindles in Y-axis. -- (1) X-Axis grooving saw with: 2.2 HP (1.7 kW) motor - 5,000 RPM; 150 mm dia. blade. -- (1) Bottom mounted boring block: 4.2 HP (3 kW) - 4,000 RPM; (29) vertical spindles; (17) spindles in X-axis; (12) spindles in Y-axis. -- (10) Horizontal spindles: (4 + 4) Spindles in X-axis; (1 + 1) horizontal spindles in Y-axis. -- (1) X-Axis grooving saw with: 2.2 HP (1.7 kW) motor - 5,000 RPM; 150 mm dia. blade. -- Machining(1) Top mounted 4.8 HP (3.5 kW) electrospindle; 7,000 - 18,000 RPM with: RH/LH rotation; HSK D-50 adaptors for manual push button "quick-tool" change; ERC-32 tool holders; RC-32 collets. -- (1) Bottom mounted 4.8 HP (3.5 kW) electrospindle: 7,000 - 18,000 RPM with: RH/LH Rotation; HSK D-50 adaptors for manual push button "quick-tool" change; ERC-32 tool holders & RC-32 collets. -- Operator InterfacePC Front-End with: BIESSE "NC 1000" + Windows "BIESSE Work" Operating System; 15" color monitor; international keyboard with soft-touch keypad; industrial mouse.RS-232 serial ports for possible downloading from an office PC; USB ports; (1) 48x CD ROM drive; all mounted in a separate control console with: Built-in 1,500 W air conditioner for constant temperature & dust-free environment. -- Complete with:Universal transformer for voltages from: 200 - 600 Volts, 50/60 Hz, 3-Phase; automatic lubrication system for guides & ways; sound enclosure and complete set of safety fences/devices; machine docs & manuals. -- Options include:"BiesseWORKS Advanced" Office version with: (2) Hardware keys; pneumatic part clamping with motorized infeed & outfeed transfer conveyors.Software Disclaimer: EX-FACTORY INC. Offers NO warranty or support, written or implied, concerning any/all "optional" or "additional" manufacturer or 3rd party software supplied with this machine. All software related issues including relicensing fees/requirements/functionality & training is ultimately the sole responsibility of the "Buyer".Bottom spindle or drive needs to be repaired NOTE: Teardown and loading not included.

The listing is for all equipment at a closed sawmill. Everything is ready to be moved ASAP. - Timberline big Jake scragg - 48” front saws - 36” back saws all inserted tooth blades. - 10’ capacity - 60ft infeed with step loader for mill - Dead indeed live outfeed - Numerous belts conveyors. - Home made 3 blade flat edger power infeed and outfeed. - 50 ft barn sweep. - The different log decks one with stop and load. - 2 descramblers. - Bandit whole tree chipper needs motor. Has 800 hours on it was wrecked and only damaged motor and cab a little. - 410 printice loader with self propelled carrier. New motor. A lot of misc electric motors, belts and other parts.

Big Jack Scragg Mill

2015 Big John Pup Trailer, Brand New Tires, Straight as an Arrow, Center Point Suspension, Only Used 5 years, As New!

2020 Big John 40RC-8FL Log Trailer Full load series. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Big on Dry Thermal Modification Kiln Optional Single or Double Units available! The photos on this listing show the latest kiln installed in the US. The wood treated was 12" wide pine at 190 degrees C. Contact CMS for more details! - Gas boiler system (optional oil or electric) - Quick, efficient installation provided by technicians! - Complete package includes shipping, installation and all drawings fro site preparation. - Approx 10,000-12,000 board foot capacity (depending on lumber size and bundle stacking) on the Double Kiln. - Customer support via internet connection.

Carolina Machinery Sales (CMS) is proud to offer Thermo-Modification Technology from the Italian manufacturer Big on Dry. ????Big on Dry has improved the Thermo-Modification process with their THERMOWOOD (THW) line and provides complete "turn key" systems. The PLC control systems allow programming for a wide variety off wood applications. This allows the same systems to work with very delicate wood that is hard to treat to thicker wood that will be used for outdoor products. The THW system can also be used as a conventional kiln with steam. Basic systems include: - Kiln completely built with stainless steel and aluminum - Initial humidy of 10-15% is reduced to 5-6% - Loading options: Side or Trolley - Heating options: Gas or Wood Burner - Humidification: Combined Spraying System - Controls: Fully Automatic Controls with PLC - Interface & Software: Allows communication with Big on Dry technicians to provide online support - Complete installation and training in the USA Contact CMS to get a quote for your Thermal Modification system

Big on Dry (BOD) manufactures conventional dry kilns in Italy. They customer manufacture every unit and provide, installation, training and customer support. Conventional drying kilns installations are for sawn wood, hardwood and softwood, with capacities ranging from 15 m3 to over 250 m3, fully aluminium or customized to existing structures, made of standard modules or provided as per specific customer requirements. BIGonDRY srl kilns may be powered by any source of energy: hot water, steam or diathermic oil supplied by conventional or solid fuel boilers as well as hot air generated by gas, diesel or electric heating systems. Contact CMS for more information on BOD kilns!

This unit is up and running as of August, 2024. The customer is producing mainly: Poplar, Oak and Pine. Capacity: Approx 12,500 board feet