Sawmill Equipment For Sale

MLS Number 11922341 Denis Comact 948 Gang Saw Edger 6" infeed table Spare guides

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

COMPAIR/LEROI WM 125SS IIA Rotary Screw Compressor.Equipped with: -- 125 HP 125 PSI, single stage asymmetrical rotary screw air-end, triplex bearings in air-end for long life, efficient 3-stage air/oil separator at 1 - 3 PPM. -- Microprocessor based control system includes: -- LED Diagnostic readout with (10) operating conditions, (8) control modes, (4) emergency shutdowns, and (4) fault warnings, microprocessor control bypass load/unload. -- 7.5 HP 230/460 V Cooling fan motor. (1,700) operating hours.

COMPAIR - LeROI WM-100SS II WQ: Rotary Screw Air CompressorSpecifications. -- Main motor: 100 HP. -- Working pressure: 125 PSI. -- Capacity: 445 CFM.NOTE-1: THIS MACHINE REQUIRES AN EXTERNAL COOLER NOTE-2: Machine has (21,311) hours on it.

Complete mill ready to dismantle and move. - Corley Sawmill & Carriage - Comac Dry Kiln

30” x 165’ Concave Belt, Conveyor/Shaft Mount Drive

32" Concave Belt Conveyor

30' Concave Belt Conveyor with 24" belt

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

750 kw Generator This was owned by a hospital. Seller purchased both units and never used them.

PRICED REDUCED Cone 2-Saw Independent Arbor Optimized High Speed Edger, 4/4 to 4" runs 14 boards per minute W/ Tailing Device W/ Innovec Generation III Controls W/ Lots of Spare Boards & Parts to Keep Software Running, Includes MIC Unscrambler, with even ender up top. Scanning Bar and hi-speed indexible infeed and tailing belt outfield. On the ground and ready to load. Taken out with Videos and instructions to re-install. A must. Ref #131

Hydraulic pump power unit, 3500 psi, 29 GPM. 100 gallon tank, 30 hp Continental Pump model: HPVR-29B35-RF-O-1R-A 100-gallon Tank MFG: HTS/Hydraulic Technical Service, Eugene OR. Hydraulic power pack 3,500 psi. Pump P/N : 1021823 Pump Disp. 3.97 in3/rev 3500 PSI max pressure, GPM: 29/30? 4 Nachi Solenoid hydraulic valves 30 HP Toshiba motor: 230/460,1770 RPM, Frame 286TC, TEFC, Duty Cont., Inverter Duty, VPWM, Severe Duty, Ins. F., Date: 2014 on tank Tank Heater: Watlow, 1ph, 1500 Watts, 240/480 volt, Prior use and stored inside a building. Approximate Shipping dimensions: 54”W x 54” L x 84” tall, 1,900 LBS. a pallet/crate will be built at NO cost for shipping, tank has been drained of oil. Contact us for a shipping rate

Hydraulic Power pack with 2 Hydraulic pumps 30hp & 7 1/2hp, oil cooler & Accumulator 30 HP & 7 1/2HP pumps 30 HP Continental Pump 3,500 PSI ( 241 bar), disp 2.62 in3/rev. P/N: 259012 / HPV-20B35-RF-O-1R-B VELJAN 7 1/2HP pump with Baldor 7 1/2hp, 2HP Baldor motor oil cooler Contact us for a delivered price Wooden pallet/crate will be provided for shipping

Continental Automatic Gas Fired Boiler S/N L 196710

10 hp hydraulic power pack, 40 gal. tank, pump Model PVR15-15B15-RF-0-5-A-1, good condition

Cook 6" x 48" 2 Saw Edger. W/ in & out feed.

The Cooks Cat Claw Sharpener and Cooks Dual Tooth Setter, both renowned in the sawmill industry, offer reliable performance for maintaining band saw blades. These used units are in excellent condition, having been owned by a single user and utilized for just three years, ensuring they deliver a near-new operational experience. The Cat Claw Sharpener automates the sharpening process, providing consistency and precision to extend the life of your blades. Its intuitive operation makes it suitable for various blade profiles, providing versatility across different sawmill applications. The sturdy construction ensures durability and long-term performance even in demanding environments. Complementing the sharpener, the Cooks Dual Tooth Setter efficiently maintains tooth set accuracy, critical for achieving straight cuts and longer blade life. Its design allows easy adjustments to cater to different blade specifications, ensuring optimum functionality. Both machines constitute an essential investment for those looking to maintain their sawmill operations efficiently and cost-effectively.

2021 Cooks HD3238 Sawmill Only 70 hours Fully hydrualic 32" log diameter capacity Roll off roller and squaring arm Extra box of blades STOCK IMAGE. PHOTOS COMING SOON

COOK 2 SAW EDGER-BOTH SAWS SLIDE W/9' INFEED ROLLCASE, 20HP MTR & 7 1/2 MTR S/N 3682981

MLS Number 11413038 Cooper Overhead End Dogging Scragg With Debarker And Gang Edger Transfer Chain Conveyor x 60’, H82,1-7.5 HP 480V gear drive 54" Cut Off Saw, 20 HP 480V motor, hyd stop gates, 20 HP hyd pack 4 strand x 12' long Debarker In Feed Deck, 5 HP 480V gear drive, H78 16” wide x 19’ long log haul belt conveyor (driven from debarker in feed tire drive) Cambio 24" Debarker, 75 HP 480V drive, spiked in/out feed rolls 20 HP 480V drive 3’ wide x 36’ long hour glass rolls transfer, 7.5 HP 480V gear drive 5-strand Scragg in feed deck x 20', H82, hyd log stop loader, 7.5 HP 480V gear drive Cooper Overhead Scragg Mill, 30 HP 480V 150 gal hyd package, variable speed cable drum feed works with pantograph arm Log positioning rolls on infeed w/ double overhead dogging system, 48” dia. saw husk(125 HP 480V each saw), setworks control 2-18” wide 2-position slab and side board belt conveyors, operators control cab w/ controls, camera and monitor for centering log 8-16’ length capacity, maximum log dia. 22”, largest square cant 12” x 12”, smallest square cant 4” x 4” 5-strand lower camel back landing transfer x 9’-6” long, 4-strand hyd lift transfer to gang edger and cant center bypass Center bypass rolls and belt conveyor to edger out feed landing transfer 10” mainland gang edger w/ 200 HP 480V drive,34” inserted tooth saws with 5/16” kerf(24 spare saws with collars), 2-2-2-4 spacing 6” x 50” mainland board edger w/ 150 HP 480V electric drive, 24” inserted tooth saws with 5/16” kerf, 8”-4”-4”-10”-6” pockets, 7-individual actuated self tailing belt conveyor out feed c/w splitters Camel back transfer,4-strand x 27-1/2’ long, H78B, 5 HP 480V gear drive 2-Saw Trimmer, 4-strand x 10’ long, 16’-4” between 20” dia. saws,10HP 480V drive on feed works and saws, 16” wide x 28’ long out feed belt conveyor, 5HP 480V gear drive 4-strand x 26’ long H78 camel back transfer w/ 5HP 480V gear drive