Equipment For Sale

KOCH SBD-B BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 4.7" - 98.4" (120 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (6) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(4) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment with, KOCH's "QC" (quick change) system & rotating device. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with "QC" Boring blocks (swivel 360°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (4) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operator & Machine Control:Beckoff SPS PLC for machine function & error diagnosis. -- Operating Features:Electrical digital setting with all drill stations arranged with readouts for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer

KOCH SPRINT SELECT.LINE 3000 CNC RAIL BORE & ROUTING MACHINE: -- Specifications:NC-positioning for "X", "Y" axis, "Z" axis is manual adjustment. Horizontal drilling station, with 3 individually controlled drilling spindles with automatic step-by-step, boring into rail components, drawer parts, chair pieces, etc. at programmed random spacing. Horizontal Routing Unit for mortise, tenon, louver, strike plate, etc. type processing. -- Working Cap: Stock length (Y) from 4.25" - 31.5" (110 mm - 800 mm), stock width (X) from 0.75" - 120" (20 mm - 3,050 mm), stock thickness (Z) from 0.5" - 2.4" (4 mm - 60 mm), max. boring depth 1.1" (28 mm).120" (3,050 mm) "X" axis divided into (4) work zones of approx 29" (736mm) ea., one part can be processed, while the others are being unloaded or loaded. -- Equipped with: (10) Stock clamping cylinders; Stock clamping system for panels/rails, small parts & solid wood parts.(3) Independent Horizontal boring spindle, 7,200 RPM, 1.25 HP (.9 kW) motor. (1) Horizontal Routing Unit for Rails, mortise, tenon, louver type processing & Door strike plates, plungers, hinges, etc., 9,000 RPM, 3HP (2.2 kW) motor. -- Operator Interface:NC Front end with 15" color touch screen monitor pad & stored in built-in CNC control using Windows type operating system with graphics and online diagnostic. serial interface and USB connection. Touch screen pad at eye-level height, integrated into machine frame structure, menu driven operator interface for function control and graphic illustration of machine functions. -- Features: Positioning speed of working units at 197 FPM (60 MPM). -- Complete with:Central lubrication system; (2) Fixed fences (1-RH & 1-LH side), (2) pop up Center Fences & (4) working zones. -- Options Include:Some additional spare parts ordered with the machine & as pictured.

KOCH - SPRINT 200 Classic: Feed-Through Boring & Dowel Inserter -- SpecificationsSPRINT 200 CLASSIC, Double-end, automatic BGD machine for straight workpieces with: (2) PTP Bore, Glue & Dowel Units & Automatic Belt Feeding. -- Working DimensionsStock length: 10.8" - 98.4" (275 - 2,500 mm); stock width: 2-3/4" - 27-1/2" (70 - 700 mm); stock thickness: 0.59" - 1.18" (15 - 30 mm).NOTE: Specified dimensions do not allow all possible combinations. -- Horizontal Drilling StationsEach side traveling on "precision" linear guides; (1) horizontal drilling unit with: (1) 1.2 HP (0.9 kW) - 7,200 RPM motor. 1.1" (28 mm) Max. drilling depth; total length of drill bits: 2.76" (70 mm). -- Dowel InsertingDowel dia.: 8 mm; dowel length: 30 mm; dowel projection: 7 - 14 mm.(2) Vibrating hoppers with: (1) Outlet tube for feeding of dowels on each side; Dowel size: 8 mm dia., 30 mm in length, and 7 - 14 mm projection. -- Operating ProcessStationary machine side is on the left side (seen in transport direction) and not adjustable.Machine is equipped with: Stock feed belts; belts move the workpiece to the BGD station & clamp it into position for processing.Workpiece is transported out of the machine after processing is complete. The workpiece is transferred to the next machine or taken out manually. -- Complete with: Central lubrication for working units: Air pressure intensifier with 2:1 ratio for constant compressed air supply for glue valves. Hopper Infeed Device. Separate drive for outfeed belt. Tele-diagnostic service compatible. Perimeter Safety Devices. All Docs, Manuals, Tools, Spare Parts associated with this machine. -- Actual Model: KOCH SPRINT 200 CLASSIC

KOCH SBD-8 BORING MACH. (FEED THRU DBL END TRIM, BORE & DOWEL): -- Specifications:0.6" - 1.18" (15 - 30 mm) Material thickness; 0.9" - 9.8" (23 - 250 mm) width; & 10" - 98.4" (254 - 2,500 mm) length cap.; -- Working pass height 36.2" (920 mm); Capacity of approx 25 Work Cycles/Min. -- Features:Motorized opening with digital setting. Automatic hopper feed with hydraulic stock feed beam and automatic return conveyor to operator. -- Each side equipped with: Trim saw units, Boring units with horizontal and vertical drilling, & Dowel insertion. -- Linear path control for stock transport with low profile machine bed and linear guides. Fixed stock stops. -- Adjustable working stations with Manual & motorized adjustments. -- Horizontal Drilling:Each side with (1) 2.7 HP (2 kW) - 3,400 RPM Boring unit. -- Each horizontal boring unit has a (3) Spindle Type D-1277 drilling chucks on 32 mm centers. -- Drilling Chucks hold 10 mm dia shank & 70 mm max bit length. -- Each head moving on linear guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Top Vertical Drilling:(2) Top Vertical Boring Units with rotating device. Each unit 2.7 HP (2 kW) - variable speed from 3,000 - 6,000 RPM. -- Each Drilling chuck with mechanical digital read out for manual finite adjustment. -- Drilling Chucks hold 10 mm dia drill bit shank & 70 mm max bit length. -- Each head moves on guides with, drilling depth control, dust extractor hoods, blow-out jets to clean holes. -- Each vertical unit can be equipped with Boring blocks (swivel 0° - 90°) with pneumatic locking. -- All Vertical units are equipped with pneumatic locking & individual adjustment of the boring block. -- Distance position readouts on all heads for finite "X"/"Y" adjustments; and "Z" axis boring depth control. -- Doweling:With (2) total dowel Inserters, (2) inserter on each side, with vibrating dowel bowl feeders. -- Includes automatic dowel measurement, pressurized glue tank, & back-wash rinsing tank. -- NOTE:This machine is currently setup for 0.437" dia. x 1.75" long dowels (11 mm dia. x 44.45 mm long dowels). Other sizes & additional dowel injectors can be purchased from Koch, at additional cost. -- Operating Features:Mechanical digital readout setting for all drill stations for "X"/"Y"/"Z" axis positioning. -- The stationary machine side is on the LH side (seen in transport direction) and not adjustable. -- The RH is adjustable via motorized movement along the "X" axis. -- The machine is equipped with Hopper Feed & has a part stack capacity of approx 9.8" (250 mm) & working capacity of approx 48 Pieces/Min. -- Stock infeed belts move the workpiece through an intermediate hopper to the stock support. Then the workpiece is transported through the working stations by means of transfer belts with lateral stock alignment. -- Work pieces are automatically feed and positioned to pneumatic stops then clamped prior to trim, drilling or insertion. -- Compl

KOCH SPRINT-PTP-2-L CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: Automatic step-by-step, boring, glue injection & dowel insertion at random spacing. -- Working Capacity:Stock length (Y) from 4.25" - 31.4" (110 mm - 800 mm), Stock width (X) from 0.75" - 98.4" (20 mm - 2,500 mm),Stock thickness (Z) from 0.51" - 1.57" (13 mm - 40 mm), max. boring depth 1.1" (28 mm). 98.4" (2,500 mm) X-Axis divided into (2) work zones of 47.2" (1,200 mm) ea zone.One part can be processed, while the other is being unloaded or loaded. -- Positioning Speed: 344.5 FPM (105 MPM), boring & insertion capacity up to (60) dowels/Min -- Machining:(1) Horizontal boring spindle, 7,200 RPM, powered by 1.2 HP (0.9 kW) motor; (1) Glue injection & dowel inserting system, Dowel inserter is set up for 8 mm dia. x 30 - 35 mm long dowels (other dimensions available). -- Operator & Machine Control:12." Color touch screen monitor using Windows XP operating system with graphics & diagnostic. serial interface & USB connection.Menu driven operator interface for function control and graphic illustration of machine functions -- Complete with:Central lubrication system; (1) Vibrating hopper for dowel delivery; (8) Stock clamping cylinders; (1) Removable center stop for up to (2) working zones; "Air tight" pressurized 1:1 glue tank.(was only used with water) (2) Fixed fences (RH & LH side), double sided center fence. -- Actual Model is KOCH SPRINT-PTP-2-L

Kockums/Cancar 24" Ring Debarker S/N 84196

KOCKUMS chip conveyor. Drive section ONLY with 20 HP drive; approximately 14' long x 42" top of chain to base x 32" deep; formed trough; 3 7/16" drive shaft and bearings. No tail section. WD120 chain. $5,500 OBO.

Includes hydraulic pump unit. Forano floating infeed available also

Kockums L&B 7’ Late Model High Air Strain Right Hand Bandmill Headrig S/N 8853. 44,000 lbs max saw strain. 11” wide wheels have heavy rims with 1-3/16” on edge of top wheel and 1-3/4" on bottom and both mounted on non-rotating arbors. Hydraulic positioned upper guide and motorized wheel lift. Cartridge pressure saw guides. Includes tilt-back upper wheel guard. Saw length is 43’-6”. Bandmill is the heaviest most productive unit built and weighs 31,000 lbs. Maximum depth of cut under upper guide at highest position is 53”. Additional capacity can be achieved with an optional column riser. Currently sitting on 17degree removeable tilted base. Max fall down is 45-1/4”. New powered clearing belt for slab removal. This is one of the best 7’ Bandmills we have seen and is capable of carriage sawing speeds over 500 feet per minute. No motor. Current new price for this bandmill from USNR is approximately $750,000. We are offering this unit for a fraction of that price, FOB, Portland, OR. Inventory No. 12500. Price, As-Is, Cleaned and Painted FOB Portland, OR ------------ $89,500.

Kockums 6' Band Mill Air Strain 9" Wide Wheels

Kockums KS28 8' x 8' Chip Screen S/N 687, Needs a cleaning, out and ready to Ship.

Kodiak 27" Ring Debarker

Several parts for 20" Koehring sawheads

Koehring lateral tilt Hotsaw head-good disk and saw motor. Set up to go on. A Timbco, but could easily be set up to go on a John Deere or timber jack

KOGER 12" AIR LOCK MDL 12-2-032 S/N 4319

Koger Material Blower with 100HP S/N KAF-4509 26" Inlet 50" Dia. Fan Blade

Reconditioned Koger rotary valves for low pressure applications. Call for pricing.

Used Koger 20” Flex Tip Rotary Valve, 2HP Drive, GOOD CONDITION, $3,000

Koger Sawdust Blower W/75HP Electric Motor & Reduced Voltage Starter.

Koger-Air,14" dia inlet/outlet, electric drive, very good condition