Pallet Equipment For Sale

45 GPM Pump | Piston Top Accumulator | Late 80's

2025 Viking Turbo 505 SE (Silver Edition) Pallet Nailing Machine with Low Hours

1979 Viking Duo-Matic Pallet Nailer Good Running Condition Ready To Load

1996 Viking Champion 304A RH Pallet Nailing Machine S/N 745C, 4 Stringer, 72L X 60W, with Stacker, Roll Case, 3 Phase 480 Volt, 20hp Motor

2024 Viper Industries Honey Badger | HB100 | 24? × 24? to 60? × 50? | 220V

Model – HB 100 | Serial – HB100-02-2021-0 | 2021

Model – HB 100 | Serial – HB100-231001

Visionary Single Notcher. Air Operated, 20hp motor. #00908

Visionary Machine Concepts CS20 Up Cut Saw S/N 0498023

WEIMA WOODWOLF Pallet Shredder. Vertically fed machine with large 42" x 96" opening. Rotor is 24" in diameter and is driven by a 40 HP electric motor. Extra heavy design allows for effective crushing of pallets, crates, boxes and other furniture waste as a primary prep machine. The Woodwolf can be placed over the top of a single-shaft shredder, which allows the broken pieces to fall directly into the secondary shredder hopper. Offered as-is/where is as removed from service. Operated only 4-5 years per owner. High quality German design and operation.

WEINIG RAIMAN PROFIRIP 450M And Combiscan EVO Luxscan Lumber Scanner SystemThe system is complete with: -- (1) Weinig lateral lumber feeder table to scanner head -- 12" wide rubber belted infeed -- Roller/Sweep type lateral conveyor with sequencing and buffer to scanner infeed -- (1) Weinig CombiScan EVO Luxscan Line Feed through lumber scanner -- Model CombiScan EVO -- Max width 310 mm (12.2") -- Min width 25 mm (0.984") -- Max length 6500 mm (255.9") Min length 900 mm (35.4") -- Max thickness 100 mm (3.93") -- Min thickness 12 mm (0.472") -- Speed range 80 to 300 m/Min (up to 250 boards/min) -- Max throughput 200 m/Min -- Luxscan combiscan EVo R with two cameras, top-bottom (2 side detection laser cameras, 2 side detection color defect high-resolution cameras, 2 side detection with dot laser, 2 side line scatter, angle crack detection 2 side) -- Freestanding operator computer control station -- Flat screen color display with keyboard -- Opticore direct controls -- Freestanding electrical and computer control cabinet -- Freestanding chiller unit for laser system -- Scanner infeed and outfeed table system -- Safety guards with access doors around the scanner and rip line machines -- Includes the machine operators' manuals -- (1) Weinig sweep type lateral conveyor table from scanner to the rip sequencer table -- Chain deck type sequencing and spacing conveyor table -- Infeed rip saw board flipper with servo fence system to rip saw -- (1) Weinig Raimann ProfiRip 450M Gang Rip Saw With (2) Movable blade -- 51 kW, 460 V, three-phase, 60 Hz -- Max cutting width 450 mm (17.7") -- Max cutting height (with 450 mm diameter blade and without pressure board) 150 mm (5.9") -- Max cutting height (with 450 mm diameter blade and with pressure board) 135 mm (5.31") -- Min. cutting thickness: 15 mm (0.59") -- Min cutting length 780 mm (30.7") -- Chain width 470 mm (18.5") -- Diameter of saw arbor 65 mm (2.55") -- Min blade diameter 300 mm (11.8") -- Max blade diameter 450 mm (17.7") -- Saw blade bore 80 mm (3.14") -- Arbor speed 3900 RPM -- Feed speed range: 15 to 120 m/Min -- Machine weight 4500 Kg (9920 Lbs) -- Saw drive motor 45 kW, 460 volt three phase -- Feed motor 4 kW, 460 V, three-phase -- (1) Fixed and (2) movable saw blade design -- Edging removal system -- Sound and safety machine enclosure -- Front access door with inspection window and safety interlock -- Freestanding operator computer control station -- Pro-Face color touch screen display -- Joystick movable blade controls -- Freestanding electrical control cabinet -- Includes the machine operator's manuals -- (1) Weinig rip saw outfeed table with lateral feeder to chop saw station -- Outfeed roller/sweep type conveyor -- Cross conveyor table with servo accelerator -- Freestanding operator conveyor system controls (zone ripping)Note: System installed new in 2019 and sells for a fraction of new.

WEINIG - VALU-RIP: Infeed Conveyor System for Rip Saw Specifications -- 7-Chain Deck; spaced at: 0", 25", 54", 75", 96", 120", 147". -- (5) Board stops on Chain Deck. -- Roller Deck with: (7) Drop chains. -- (8) 50" Rollers; powered by: 2 HP Motor. -- Drop Chains spaced at: 0", 36", 54", 72", 110", 147", 181-1/2". -- Automatic Saw Fence with: TISFOON Scanning System. -- Powered Pinch Roll before Saw: 2 HP Motor.NOTE: This is part of a Total Plant Liquidation; please call for details!

West Plains 5-Head Trim Saw 5th Head need motor Approx 4" thickness capacity

2015 | 10" Band | 2" Wide

1997 West Plains Board Chamfer | Lightly Used | In Good Running Condition

West Plains 2hd Notcher. #C992

2001 I West Plain 400 Resaw I 480v I Stand Alone I Great Condition

West Plains 2 head resaw, 6" wide capacity, electric drive, block guides, recently in production and ready to work

West Plains board deduster, 12" wide capacity, lineshaft ready, good working condition

Whirlwind up-cut chop saw, 2-3/16" x 8-1/4" cutting capacity, electric drive, air power for blade movement, good working condition