Sawmill Equipment For Sale

1995 Ingersoll-Rand SSR-EP125 571 CFM, 125PSIG, 125HP Motor, 3 Phase, 120 Volt, S/N F12382U95208

Ingersoll Rand Mod SSR-EP50SE 50hp rotary air compressor; 215 CFM 17,840 operating hours with 200 hours on rebuilt motor; s/s G9716H02038

Ingersoll Rand TZ220 heatless regenerative air dryer s/n 6211

INGERSOLL RAND SSR UP6-5-125 5 HP Horizontal Tank-Mounted Rotary Screw Air Compressor, with Unknown Hrs.Specifications: -- Cap. 18.5 CFM @ 125 PSI. -- Max. pressure 125 PSI. -- Sound level 65 dBA. -- Pump speed 2,000 RPM.Equipped with: -- Controller, with LCD Display. -- Power outage restart.Complete with: -- 60 Gallon 24" Dia. x 48" L Horizontal Air Receiving Tank. -- INGERSOLL RAND "IRGP64" In-Line Air Filter.

INGERSOLL RAND SSR UP6-30-150 30 HP Horizontal Tank-Mounted Rotary Screw Air Compressor, with 29,762 Hrs. & Built-In Refrigerated DryerSpecifications: -- Cap. 112 CFM @ 150 PSI. -- Max. pressure 150 PSI. -- Sound level 69 dBA. -- Pump speed 4,179 RPM.Equipped with: -- Controller, with Graphic interface & Touchpad. -- Smart Energy Control, Eliminates running unloaded by cycling compressor on/off.Complete with: -- 120 Gallon Horizontal Air Receiving Tank. -- "22069132" Built-In Refrigerated Compressed Air Dryer. Machine Dimensions: 70" x 36" x 71" H.Machine Dimensions with Blocks: 70" x 42" x 73" H.

INGERSOLL RAND SSR UP6-30-150 30 HP Horizontal Tank-Mounted Rotary Screw Air Compressor, with 29,762 Hrs. & Built-In Refrigerated DryerSpecifications: -- Cap. 112 CFM @ 150 PSI. -- Max. pressure 150 PSI. -- Sound level 69 dBA. -- Pump speed 4,179 RPM.Equipped with: -- Controller, with Graphic interface & Touchpad. -- Smart Energy Control, Eliminates running unloaded by cycling compressor on/off.Complete with: -- 120 Gallon Horizontal Air Receiving Tank. -- "22069132" Built-In Refrigerated Compressed Air Dryer. Machine Dimensions: 70" x 36" x 71" H.Machine Dimensions with Blocks: 70" x 42" x 73" H.

INGERSOLL RAND SSR UP6-30-150 30 HP Horizontal Tank-Mounted Rotary Screw Air Compressor, with 29,762 Hrs. & Built-In Refrigerated DryerSpecifications: -- Cap. 112 CFM @ 150 PSI. -- Max. pressure 150 PSI. -- Sound level 69 dBA. -- Pump speed 4,179 RPM.Equipped with: -- Controller, with Graphic interface & Touchpad. -- Smart Energy Control, Eliminates running unloaded by cycling compressor on/off.Complete with: -- 120 Gallon Horizontal Air Receiving Tank. -- "22069132" Built-In Refrigerated Compressed Air Dryer. Machine Dimensions: 70" x 36" x 71" H.Machine Dimensions with Blocks: 70" x 42" x 73" H.

INGERSOLL RAND SSR UP6-30-150 30 HP Horizontal Tank-Mounted Rotary Screw Air Compressor, with 29,762 Hrs. & Built-In Refrigerated DryerSpecifications: -- Cap. 112 CFM @ 150 PSI. -- Max. pressure 150 PSI. -- Sound level 69 dBA. -- Pump speed 4,179 RPM.Equipped with: -- Controller, with Graphic interface & Touchpad. -- Smart Energy Control, Eliminates running unloaded by cycling compressor on/off.Complete with: -- 120 Gallon Horizontal Air Receiving Tank. -- "22069132" Built-In Refrigerated Compressed Air Dryer. Machine Dimensions: 70" x 36" x 71" H.Machine Dimensions with Blocks: 70" x 42" x 73" H.

This air dryer is sold-as is.

Inovec Positioning & Control System. 30hp Electric / Hydraulic Power Unit to Run Log Knees with Salem Computerized Networks S/N 195839-03

Inovec Stereo Scan 3-D Log Scanner

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - MT-4843, ...Manual-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Cylinder: 8". -- Opening size: 60" x 46". -- Main motor: 40 HP.Equipped with: -- Control panel. -- Oil Cooler – Air-Over-Oil. -- 10' Bale Run-Out Table. -- High-Temp/Low Oil Level Shutdown. -- 48" x 43" x 60" Bale Size.

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

INTOREX HB-65 Automatic Dowel Milling Machine. For round dowels, table legs, broom handles, agricultural tool handles (concentric), umbrellas, stair rails, etc.Specifications: -- Automatic machine for rounding square stock with a cutter head that has (3) tools and finished diameters between 15 and 65 mm (3/32" to 2-1/2"). Unlimited working length. -- The head drive is 8.5 KW (10 HP). -- Working advance speed adjustable between 8 and 30 meters/Min. (26.25 to 98.5 FPM.) by means of a potentiometer. -- The machine has (4) draw-in rollers and (4) draw-out rollers to guarantee the uniform advance of the bar and good finish quality. -- INTOREX is designed and quality-built in Spain. -- Dimensions: 1500 mm (59.1" long x 1200 (47.3") wide x 1400 ( 55.2") high. Approx weight 850 Kg (1870 Lbs).

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler