Pallet Equipment For Sale
417 Results Found
Call for Price
SMW Double End 2HD Heavy Duty Trim Saw Processing Plank Thickness 6", Processing Plank Width 12", Processing Plank Length 79" and 10HP Motor
$ 36,000
SCM M3 Multi-Blade Dip Chain Gang Rip SawSpecifications: -- 300 mm (11.81") Width cap. -- 110 mm (4.33") Max. depth of cut. -- 8-3/4" Throat depth. -- 390 mm (15.35") Min. stock length. -- 200 - 350 mm (7.87" - 13.78") Blade diameter. -- Arbor dia. 70 mm (2.76"). -- Table size 750 x 1,530 x 750 mm H (29-1/2" x 60.24" x 29-1/2" H). -- Blade speed 4,200 RPM. -- Feed speeds 6 - 48 MPM (19 - 157 FPM).Equipped with: -- 44 kW (60 HP) - 3,554 RPM Blade motor. -- Variable speed drive feed chain motor. (2) Upper infeed & (2) Upper outfeed 4" Dia. rollers, Automatic chain lubrication. -- Top & bottom anti-kickback fingers. -- Main dust hood, with 200 mm (7.87") Dia. outlet. -- 40"; x 2-3/4"; H Adjustable infeed fence. -- Motor load meter.Complete with: -- Operation & Maintenance Manual. -- Tooling (As pictured).
Call for Price
Call for Price
6 ft Blue Babe deck saw bars 72”+- overall length 3 bars available 5 Oregon chains available Contact us for a delivered price
Call for Price
SII Heat Treater 600 Pallet Capacity Mfg year is 2003 Model- PT600 Capacity- (1) 53’ truckload Material- Aluminum, Stainless Steel, Foam inside Insulation Values- unknown Processing time- Depending on Board Feet & Starting Temp, about 4 hours Burner- Qty 4 Fan- Number of Fans- 4 or 5 (wasn’t completely sure) Control System- PLC Programmable Logic Controller Power Requirements- 3 phase, 240v, and he thinks a 60amp breaker Dimensions- 55’L x 15’ W including control room BTUh- 400,000 per burner
Call for Price
Call for Price
$ 10,800
SMART 60" Pallet Band Dismantler Specifications: -- 60" Bay -- (1) 15 HP Blade Drive Motor. -- Hydraulic powered table lift. -- Adjustable table height to allow the machine to dismantle a range of different heights of wooden shipping pallets. -- New controls
Call for Price
SMART 62" Bandsaw DismantlerSpecification: -- Single operator design w/ lumber catch basket.. -- 62" Pallet width capacity. -- 15 HP Direct drive / gear reducer design. -- VFD for adjustable blade speed. -- Push button operated table height adjustment. -- Self contained hydraulic blade tensioning. -- Low maintenance durable blade guide bearings. Blade length 23'6"Completely refurbished in 2023!
$ 7,000
$ 8,500
Call for Price
Call for Price
Call for Price
Call for Price
$ 14,700
STETSON ROSS - MR-14, ...Dip Chain Gang Rip Saw75 HP Motor, belt drive to arbor; 14" wide capacity.Specifications: -- 3-9/16" Max. depth of cut; 12" dia. blade capacity; 42" throat clearance from extreme outboard saw. -- 5 HP Variable feed speed from 50 to 200 FPM; automatic feed chain lubrication system; (6) overhead pressure rollers, adjustable via 0.75 HP motor; manually operated hydraulic arbor lift; 20" min. length of stock. Complete with: -- (2) Saw sleeves, (1) sleeve with a complete set of spacers; setup stand, oil bath lubrication of bearings, and oil mist feed chain lubrication; anti-kickback fingers; infeed fence, load meters, and magnetic starters. -- Sawblades include: (7) Sets of saws; (1) set of (12) blades; (1) set of (8) blades; (1) set of (7) blades; (1) set of (6) blades; (2) sets of (2) blades; and (1) 3/4" wide hogging blade matched to the diameter of the saw blades. - All blades are 36-tooth. -- Also included: MEREEN-JOHNSON Laser Light Mounting Stand that was used with this "MR-14"; no laser lights included, but there is a power supply to handle up to (12) Lasers. -- Currently with Cabling for (4) fixed & (5) sliding lasers and positioning mounts; in 2006, Stand sold new for over ...$ 2,000 without lasers.NOTE: The feed chain was replaced in 1994 and a new saw sleeve was added in 2003, or about a year before retiring the machine from moderate use. The machine appears to have good feed chain life remaining.
Call for Price
Storti T-Flex Block Nailer. Makes about 25-35 pallets an hour. In great working condition. Located in MN. Video Available. #C934
Call for Price
2013 | 3, 4, & 5 stringer capabilities | Individual driven head per stringer with compensation | Pallet turner | Nail squasher | Corner cut machine | Pallet flipper | Pallet stacker