Sawmill Equipment For Sale

Custom Built Heavy Duty Scragg Deck C55B rooftop chain 3’-7’ legs, 33’ long, 30” wide, 24’ catwalk, hydraulic motor drive

3 Units. Live Floor Bin 9' x 22'. Double Screw Conveyor Discharge. Extremely Well Built.

Live Floor Bin With Two Bays. 14.5' x 13.5'. Double Screw Conveyor Discharge. Extremely Well Built.

•Culter Hammer Solid State Reduced voltage starters •Two available

Cutler Hammer 9 Section MCC

2008 Eaton Cutler Hammer Freedom Series 2100 MCC 480V; Sect 1: 800A; Sect 2-7: 600A; Includes: Circuit Breaker Type: INCF, 800A; Disconnect Motor Control FDRF, 30A; (2) Disconnect Motor Controls Type: FDRF, 400A; Transformer Cat No. C000P7HSES; Power Supply Type: PWRSPL; (5) Disconnect Motor Controls Type: FDRF, 100A; (2) Motor Controls Type: F204, 60A; (3) Disconnect Motor Controls Type: FDRF D, 60A; Disconnect Motor Control Type: FDRF, 200A; (4) Disconnect Motor Controls Type: FDRF D, 30A; Panelboard Type: PNLBD; Motor Control Bucket Type: FDRB, 175A;

008 Eaton Cutler Hammer Freedom Series 2100 MCC 480V; Sect 1: 800A; Sect 2-7: 600A; First 2-Sections Needs Repair; Includes: Screws; Circuit Breaker Type: INCF, 800A; (5) Disconnect Motor Controls Type: FDRF, 30A; (2) Disconnect Motor Controls Type: FDRF, 400A; Transformer Cat No. C0005P7HSES; Power Supply Type: PWRSPL; (5) Disconnect Motor Controls Type: FDRF, 100A; Motor Control Buckets Type: FDRB, 175A; (2) Motor Controls Type: F204, 60A; (5) Disconnect Motor Controls Type: FDRD D, 60A; Disconnect Motor Control Type: FDRF, 200A; (4) Disconnect Motor Controls Type: FDRF D, 30A; Panelboard Type: PNLBD;

2008 Eaton Cutler Hammer Freedom Series 2100 MCC 480V; Sect 1: 800A; Sect 2-8: 600A; Includes: Power Supply Type: PWRSPL; Disconnect Motor Control Type: FDRF, 30A; (11) Motor Controls Type: F204, 30A; (3) Motor Controls Type: F204, 100A; (6) Disconnect Motor Controls Type: FDRF D, 30A; (2) Motor Controls Type: F204, 200A; (6) Disconnect Motor Controls Type: FDRF D, 60A; Motor Control Type: F204, 400A;

2008 Eaton Cutler Hammer Freedom Series 2100 MCC 480V; Sect 1: 800A; Sect 2-8: 600A; Includes: Power Supply Type: PWRSPL; Disconnect Motor Control Type: FDRF, 30A; (8) Motor Controls Type: F204, 30A; (4) Motor Controls Type: F204, 200A; Disconnect Motor Control Type: FDRF, 100A; Disconnect Motor Control Type: FDRF, 200A; (4) Disconnect Motor Controls Type: FDRF D, 30A; (2) Disconnect Motor Controls Type: FDRF D, 60A; Motor Control Type: F204, 100A; Motor Control Type: F204, 400A;

2008 Eaton Cutler Hammer Unit Substation Dry Type Distribution Transformer 750 KVA; HV: 6900; LV: 480Y/277;

2008 Eaton Cutler Hammer Freedom Series 2100 MCC 480V; Sect 1: 800A; Sect 2-7: 600A; Includes: Circuit Breaker Type: INCF, 800A; Disconnect Motor Control FDRF, 30A; (2) Disconnect Motor Controls Type: FDRF, 400A; Transformer Cat No. C000P7HSES; Power Supply Type: PWRSPL; (5) Disconnect Motor Controls Type: FDRF, 100A; (2) Motor Controls Type: F204, 60A; (3) Disconnect Motor Controls Type: FDRF D, 60A; Disconnect Motor Control Type: FDRF, 200A; (4) Disconnect Motor Controls Type: FDRF D, 30A; Panelboard Type: PNLBD; Motor Control Bucket Type: FDRB, 175A

Cutler Hammer Westinghouse Pow-R-Line Panelboard 480Y/277V; Includes: (1) 200A Breaker; (1) 300A Breaker; (3) 400A Breakers; Tag: 246845

Cutler Hammer Control 180A; Nema Size 0; Tag: 246890

Cutler Hammer Westinghouse Panelboard 800A; 208/120V; Includes: (3) 225A Breakers; (4) 150A Breakers; (3) 100A Breakers; (1) 50A Breaker; (1) 30A Breaker; (1) 800A Main Breaker; Tag: 246846

DANCKAERT - 44 , ...ResawAir Strain 44"; x 5"; Bandsaw.Features & Specifications: -- McDONOUGH Center Split Feed Works. -- Wheel is supported on both sides - not cantilevered. -- Pressured guides. -- McDONOUGH Infeed Rolls. -- Max. Cut: 14";. -- New Dynamic brake. -- 60 & 100 HP. -- Control Cabinet (has battery backup and resistors to prevent spikes). -- Infeed & outfeed systems are the same. -- 24 ft. Long Camel Back chain (has air bags that are controlled by photo cell to raise & lower and index 1-board at a time). -- Max. length of lumber: 24 ft.From Seller: "The machine has a new VFDD 100 HP and a new WEG Severe Service 60 HP motor. All new hydraulic motors, caramel back chain, and roll cases."NOTE: Needs hydraulic unit.

(5) Danfoss VLT-5000 VFD 50Hp Max

DELTA 50-764 Dust Collector. -- Self-contained indoor unit; 5 HP fan motor, rated at 4,500 CFM. -- Equipped with: (8) Upper cloth filter bags and (2) lower collection bags; large dia. inlet with flange mounted manifold with (3) 5" dia inlets. -- Complete with: Mobile base with (4) swivel casters. Note: Description based on Model Type, manufacturer's plate, and information from Seller; please inspect to confirm the required specifications. Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

DELTA 50-866 Dust Collector. 5 HP fan motor, self-contained unit, rated at 4,500 CFM. -- Equipped with: (12) Upper cloth filter bags and (2) lower cloth collection bag with 19.4 cu. ft. cap. each; large dia. inlet with flange mounted manifold with (4) 5" dia inlets. -- Complete with: Mobile base with (6) swivel casters. Note: Description based on Model Type, manufacturer's plate, and information from Seller; please inspect to confirm the required specifications. Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

DEVILBISS - 445: Compressor15 HP Induction motor; reciprocating compressor pump: 53.7 CFM @ 175 PSI; 1,760 RPM; splash lubricated 2-stage cast iron pump.Equipped with: 120-Gal. Vertical tank with: Automatic start/stop operation and oil sight glass.Pump with deep finned cylinder heads; air-cooled aftercooler: Large diameter air filter; pressure gauge; belt guard.

DENRAY 2872 B Down Draft Sanding TableThis model is great for medium sized jobs, and can be used for plastics, woods and finishing materials. The 2872B comes with 80/20 cartridge filters which clean with a 99.95% capture rate at .5 micron. This model comes standard with Denray's "Jet Pulse" push-button cleaning, rubber coated top, along with motor access on the left end and filter access on the right end.Large work surface on this 28" x 72" table with DENRAY'S Pulse Jet Cleaning System. -- Rated at 3,000 CFM, after filters, with 2 HP motor and magnetic starter. -- Space-saving self-contained unit w/built-in dust drawer. -- High efficiency cartridge filters (180 sq. ft. of cloth area) that clean dirty air to .5-micron. -- Includes: Push Button cleaning -- Quiet operation at only 74 dBA sound level. -- Comfortable 36" working height. -- 3/4" Thick steel-reinforced MDF board worktable with "non-marring" rubberized surface. -- This machine can be used in heavy wood, finishes, solid surfaces and stone type materials. -- Available options: -- Explosion Proof Motor (3 Phase only). -- Light Bar. -- Casters. -- Auto-timer. -- Muffler (reduces sound level 10-12 dbs.). -- 100% Spunbond Polyester FiltersCarbon Filter Bank (odor only). -- HEPA Filter bank. --Three-sided Hinged Safety Shield. -- Magnehelic Gauge. -- HDPE Plastic Tabletop. -- Hydraulic Height AdjustmentAlso available in 230V, 460V and 575V 3 Ph..