Meadows For Sale
.gif)
3638 Results Found
$ 27,000
SALEM 62" Linebar Resaw complete with 125 HP motor and drive, roller infeed with slab turners; linebar section with two press roll arms operated by SILVATECH linear cylinder with setworks; resaw is weight strain type-older machine but in good condition, electric screw for raising and lowering guide; outfeed with transfer; cross-transfer with slab dump; return roller conveyor; 3 strand transfer back to infeed. Machine has been setting in present location approximately 6 years. SYSTEM MUST BE REMOVED FROM PRESENT LOCATION.
$ 55,000
Salem 54in Air Strain Left Hand Resaw Band Mill, Cartridge Guides, Manual Stop Guide, 1.3 Top / 1.44 Bottom - Call Jeff for more info at 574-370-5050 We can go through this mill if customer needs that. An offbeat bel;t can be added for an additional cast as well.
$ 68,500
Offbear belt, wheels and hood included. - Call Jeff for more info at 574-370-5050
Call for Price
Salem 6' x 48" Top Arbor Edger S/N 88-133499 W/20' Outfeed
Call for Price
Salem 54" band Mill - S/N-L96655.83
Call for Price
Salem 72" Band Head Rig
$ 6,500
bar type log turner, used with 42" carriage, hyd drive, good working condition
$ 29,500
One (1) Used Salem 6’ Right Hand Air Strain Bandmill, S/N 8564879. Was last installed as a resaw and is in very good condition. Includes pressure guides, solid top wheel with 7/8” thickness at edge of rim and 11” wide. Inventory No. 11082. Price, FOB Portland, OR ---------------------------------------$29,500.
$ 19,500
Salem 3-Block 36" Hydraulic LP Carriage, S/N 160799-93, built in 1999. Appears in very good condition. equipped with good rail, pantograph, cant flippers, on-board Brownsville turners, center knee tong-dog, chromed face and bed plates, 13" UHMW plastic insert wheels, on 60" track centers, and 20hp Inovec hydraulic power unit. Overall carriage width is 89". Bunk spacing is 108" and 75" left to right. Overall bunks measure 200". Top of bunks to top of rail is approximately 27-1/2". No setworks computer included. Inventory No.12392. Price, FOB, Portland, OR --------------------------------------------$19,500.
$ 140,000
Call for Price
Salem 6" x 48" Gang Edger w/10' Powered Infeed Rollcase, Knurled Chrome Feed Rolls, Overhead Pneumatic Hold-Down Press Wheels, Hyd Driven, Material Positioners, Hyd Operated 19" Saw Shifting System, Laser Light Shifting System, (1) Laser Light, Controls, 75Hp Motor, 10Hp Hyd Power Pack, T S Manufacturing 24" x 20' Pneumatic Lateral Shifting Edger Outfeed w/(5) Overhead Powered Feed Rolls & No Drive
$ 125,000
Recently Refurbished 22" Ring Debarker New Controls Optional 22" Metal Detector
Call for Price
Salem 4'x11.5' Steel Insulated Sawyers Control Booth w/ Air Conditioning
Call for Price
Salem 7' Full Air Strain Vertical Head Band Saw with 26"x7' Slatted Offbreaker
Call for Price
Salem 25hp Electric / Hydraulic Power Unit
Call for Price
Salem 7.5 hp Electric / Hydraulic Power Unit
Call for Price
Salem Linebar Resaw Runaround includes: 52in X 15ft in Feed Rollcase with Positioners & Log Turners, 54" X 35' Outfeed Rollcase with 2-Way Chain Jump Transfers, 12' X 14.5' 5-Strand Transfer Deck with 10' X 11.5' 4 Strand Camelback Chain, 12' X 10' 4 Strand Cant Lowering Deck with Air Stops & Board Tipples, 12' X 14' 4 Strand Transfer Deck, 5 Strand 180° Transfer Return Deck into 11.5' X 15.5' 5 Strand Deck W/ Hydraulic Stops, Flippers & Pin Stops All with Electric Drive
$ 7,000
SALEM operator's cab; approximately 5' wide x 10' long x 8-1/2' tall; with seat and A/C on top (adds 18" to height); no window on one side; rear entry, 30" door. Offered as-is/where-is, as removed from service. No warranties or guaranties. Price $7,000.
Call for Price
Salem 2 Saw Edger S/N 152747-92 with Infeed Roll Case
$ 17,250
6', top wheel is 1" thick, air strain, was used for a line-bar resaw, good working condition