Pallet Equipment For Sale

4x6 Speed Cut

Brewer 3-Head Resaw | 1998 | 480V | GE2000

Brewer single head notcher, 15 hp electric drive motor, indexable head, good working condition

Brewer BR-8112 S | 460 V | 25hp Cross Cut | 100hp Bottom Arbor | 60hp Top Arbor | 30 hp Plainer Motor.

Brewer pallet board chamfer, rebuilt by Brewer and not used much since, electric & hyd drive, very good condition

480V | 2011

Complete Brewer Pallet Line consisting of: Brewer infeed cant deck; Brewer operators cab with controls; electric motor panel with starters; Brewer   bar-type unscrambler and infeed belt conveyor to Brewer cut-off saw with setworks; Brewer out feed belt conveyor to gang saw; Brewer 24" wide gang with motors and sizer; Cornell stacker and West Plains notcher and conveyors to connect stacker and notcher;  and waste conveyor.  Removed from service and ready to load.   Price:  $155,000.00 loaded on your truck.   NOTE: Year-end taxes or machinery investment-- Your Choice.

Designed to remove saw dust from boards 30" to 72" long x 3" to 8" wide x 3/8" to 2 ½" thick. Unscrambler style feed with four strands of #2060 chain and ½" tall dogs feed boards from a lower hopper singular and sideways through 8" diameter upper and lower spiral, nylon drum brushes.

Brewer Golden Eagle Double End Trim Saw

Brewer Golden Eagle B-Series Lumber Stacker with Electrical Panel. S/N 071901

Brewer GE-2000-CF Chamfering Machine with On Board Hydraulics S/N 090300 RW (reworked). The Hydraulic Scissor Lift is also Available

2002 Brewer Chamfer with Controls 15HP Electric Motor model: 2002DCF s/n: 070303

Brewer 2 head resaw with complete run-around system, electric/ hyd drive, good working condition

Brewer Golden Eagle single head resaw, electric drive, 36" dia wheels, return belt, includes numerous extra blades, this machine is in excellent condition and ready for production

Brewer side-winder style deduster, up to 72' long capacity, good working condition

This machine was removed from production about 5 years ago in working condition. Currently under power. Seller believes it to be about 12 years old. Set up for 30x42 3-stringer w/3 bottom & 6 top decks: will do up to 40x48 Production rate they did was about 250-275/day per 8hr shift Does not have all of the inline air filters & water traps. Seller does not use the bottom spacers Machine needs some tubing and minor parts to get the bottom pop-up spacers functional. 110V

This machine was removed from production about 6 months ago in working condition. Has a new motor for the machine and just needs to be wired up.

Cam-Wood TRS-MR-1300 X 100mm Roll Feed Gang Rip SawSpecifications -- Working thickness: 10 - 100mm • -- Working width: 530 - 1300 mm • -- Working thickness : 10 – 75 mm / 100 mm • -- Saw Blade 14", • Washer Diameter 110mm • -- Minimum length of work piece when feeding consecutively: 600mm • -- Number of spindle : 1 • Equipped with & Features -- Up & down motor : 1 HP x 1 • -- Feed speed : 6 - 15 M/ min. • -- Feed motor: 7.5 HP x 1 with Inverter • -- Multiple rip saw spindle motor:150 HP / 200 HP • -- Spindle diameter : 80 mm with two key-ways 10 mm5 mm • -- Spindle R.P.M.: 4,000 R.P.M. • -- Movable 1300 mm Saw Shaft Support for easy saw blade replacement.

CAM-WOOD 1AM-1180-G Gasoline Pallet NotcherSpecification: -- 13 HP PREDATOR Gasoline motor -- Maximum notch size 9" L x 3" H x 3" D. -- Cutter-head with (40) insert replaceable tip knife cutters for recycled wood. -- Approximately 400 to 600 notches / Hr. -- Imported Head and Blades – The Highest Quality. -- Heavy Duty Industrial Construction. -- 6-Month warranty on manufacturing defects on mechanical parts. Machine Floor Dimensions: 48" L x 36" W x 40" H - Weight 720 Lbs.Palletized Shipping Dimensions: 48" L x 40" W x 44" H - Weight 772 Lbs.

CAM-WOOD MRS-340-1M Dip Chain Gang Ripsaw with one Shifting Blade:Specifications: -- Cutting width up to 13";; machine will pass thru 25-1/2"; -- 3"; Maximum depth of cut with 12"; diameter blades. - Will cut 4"; thick with 14"; blades (optional). -- With 70 mm saw spindle; accepts 90 mm bore sawblades -- With air-loaded pressure rolls, standard fence, and feed chain. -- Urethane Chain Pads and Pad Holders optional -- With (1) powered moveable blade and fixed blades. -- Moveable blade controlled with a joystick. -- With (10) push buttons for pre-programmed selective ripping -- The shifting blade moves at 20 to 80 mm/second (up to 3"; per second). -- Moveable saw blade traverses from 0.59" thru 13.38" -- 50 HP Saw arbor motor; -- 3 HP Feed motor with feed speeds from 15 to 130 FPM -- (2) 1/2 HP Lift motors for pressure rolls and saw arborOptional Equipment when ordered with the machine: -- TRS-FT AUTOMATIC INFEED CONVEYOR SYSTEM, with Movable Fence with Digital Display and Shifting Laser Light for Rip Width Setting: .. -- Hydraulic Quick Lock Spindle Assembly. The hydraulic locking spindle assembly is designed to provide for quick changeover between various ripping requirements. Simply turn the locking knob to pressurize the arbor and lock the blades in position. Turn it in the opposite direction to unlock the blades. The sawblades are mounted to solid steel blade collars: ... -- Additional Quick Set Mechanically-Locked Saw Collars for fast, accurate, sure holding of saw blades in any stationary position ... -- 60 HP Saw Arbor Motor: -- Additional 30 MW Laser Unit with Bracket & Wiring: ... -- Pneumatic Pressure to Hold Down Feed Rollers (In lieu of spring pressure). Provides better control of the product being fed. Each pressure roll is controlled by an individual pressure regulator: .. -- Short stock feeding device for 14"; blades (see specifications for cutting capacity information): -- Feed Chain with (69) Easily Replaceable Bolt in Cast Iron Pads. Allows for changing chain pads as they wear or get cut into rather than replacing the complete chain assembly. NOTE: Specially ground down to 0.06"; square tip for optimum hold with virtually no marking: ... -- Feed Chain with (69) Easily Replaceable Urethane Non-Marking Strip Inserts. Urethane is vulcanized to metal backing bars and bolted in place: ... -- 12" Dia. carbide tipped ripsaw blades, cuts up to 3" material: ... -- 14" Dia. carbide tipped ripsaw blades, cut's up to 4" material: ...NOTE: Foot Pedal seen in the photo is only used with a powered Infeed Table and is designed to release boards from the Feed Table.