Edmiston For Sale

MEADOWS MILLS 4 STRAND SAWMILL STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Sawmill style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 2 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

MEADOWS MILLS 3 STRAND DEBARKER STOP-N-LOAD LOG DECK -- Deck strands constructed with 4" x 8" x 1/4" wall tubing -- Chains run in 4" channel lined with UHMW wear strips -- Hydraulic Cylinder: One 2" x 12" with 1 1/2" rod -- Chain is WR-78 -- Front and rear crossbars are constructed with 6" wide flange beam -- Debarker style stop-n-load -- Hydraulic drive with Auburn (or equivalent gear box from alternate manufacturer) gear box -- Strand spacing is determined by buyer, standard is 6 feet -- Controls: not included in base price -- Legs may be included for an additional cost -- Log decks are disassembled and bundled for shipment

Meadows Mills 6” Spartan Gang/Edger

Meadows Circular Sawmill 1 million + board feet per year 56" blade with new bits and shanks New factory built saw arbor and bearings from Meadows New factory built live feed conveyor Computer setworks 225 hp Detroit Some hydraulic hoses and wiring could be replaced Was making crossties

Meadows #2 - 3HB Modular Mill w/Husk Frame, Offing Belt, Overhead Mud Saw, 4 x 5 Control Cab, Computer Setworks & Hyd Drive System, Log Turner, 56" Saw Blade, 100HP Motor, Debarker for Saw Cut. Out and Ready to Ship

Meadows LH 3 Knee Circle Saw Mill 3 Head Block, Carriage. Track. Cab & Controls 52" Blade With Electric Motors. Believe it is a #2

Meadows board edger, 4" thick x 36" wide capacity, infeed rollers, outfeed is a tilt table, line-shaft ready, 2 blades-1 is movable, good working condition

Meadows edger 4" thick x 36" wide capacity, infeed/ outfeed, 1 movable-1 stationary blade, includes BRAND NEW blades and collars, comes with sawdust blower, recently in production and in good working condition

Meadows Trojan 36" x 7" Fixed Arbor Gang Saw w/75hp Motor, 8' Gravity Roll Infeed with Powered Cant Positioner, Laser Light System with 6 Laser Lights & 36" x 13' 6" Powered Outfeed

The #1 Portable Meadows Mill is a reliable used circular sawmill, equipped with essential features for efficient wood processing. It comes with two head blocks, with the option to upgrade to four if required, offering flexibility for various sawing needs. This right-hand mill ensures precision and ease of operation through its power receder, hydraulic dogs, and hydraulic feed system. An additional blade is included, providing value and readiness for continuous use. This sawmill is in good condition, making it a dependable choice for both small and large-scale timber tasks. With its portable design, it allows for convenient relocation and operation at different job sites, increasing its utility and appeal to users who require versatility and efficiency in their wood cutting endeavors.

Meadows #2 Sawmill w/ 50’ of track / (2) movable saw vertical edger, husk frame, carriage drive, log turner, mill is complete w/ (2) strand infeed log conveyor, green chain, barn sweep under head saw w/ outside incline stacking section, Detroit 450 KW genset, 150 HP head saw w/ all wire and conduit included, Ref #205

Meadows #1 Mill, diesel power w/ Miner 332 edger, gas engine - Miner 332 portable edger – (2) saw, S/N 9700, rated 3” material, mounted on carriage, 4” rip fence, Kohler gas engine 25 HP w/ infeed & outfeed, (1) movable saw, additional saw plates, (4) adjustable legs that fold in, 20’ portable (2) strand log deck, hydraulic motor w/ hoist drive, H-78 chain, under carriage to relocate, Meadows # 1 24” (3) HB carriage, hand set works, hydraulic & electric dogs runs on phase converter w/ triple bearing husk frame, 56” inserted tooth saw, S/N 4MF-1439-94, chain type log turner w/ onboard hydraulics, foot control log dec, hand controls to actuate dogs & log turners, foot, blower under husk frame w/ discharge pipe, cuts 16’,14’ x 16” outfeed belt conveyor, (2) outfeed gravity roll case, axles for mobility w/ 60 Series 6-cylinder w/ PTO sheaves and fuel tank…$45,000 Also available with mill only both or one or the other can sell with mill. MILL MUST SELL FIRST Case 585E Construction King 4 x 4 forklift, S/N 409-05-9019, triple mast w/ rebuilt cylinder, 4,920 original hours…$16,500 International (early 90’s), gas engine w/ Serco 8000, S/N L3001 w/ outriggers w/ PTO & hydraulic motor & reservoir, 2,681 hours, 4BT Cummins engine…$16,500 Ref #207, Contact Ethan Mealer for more information (931) 607-4738

Meadows 4 headblock carriage, Model; #3 DELUXE, 43" center to center wheels, 110 volt over air solenoids, good working condition

The Portable #1 Meadows Mill is a used circular sawmill designed for efficient timber processing. It features a 14-foot right-hand carriage with a 3-headblock hand-set configuration, complete with a receder. This model boasts an all-steel frame, which enhances its durability and stability during operations. Although the rubber on the wheels is not suitable for road transport, the mill's robust construction ensures reliability on-site. This revitalized version of the Meadows Mill has undergone a thorough rebuild and includes numerous new parts, promising dependable performance in cutting operations. A noteworthy addition is the 56-inch F-style blade, which allows for precise and effective sawing. Its design makes it suitable for users requiring a functional and sturdy sawmill without the need for immediate transportation. It's an ideal choice for those in the timber industry seeking a reliable solution for their milling needs.

Meadows Chain Turner

The Model 120H log turner utilizes two (2) 2 inch by 12 inch hydraulic cylinders with 1 1/2 inch bores to lift its head. The log turner chain comes standard with 13 teeth that are 1 inch wide. The head is chain driven by a Char-lyn 104-1253 hydraulic motor (included). The drive includes a 13 teeth and 25 teeth sprocket and number 80 chain with chain guard included. Controls, not included, with hoses sell for $2,490.00. 20 GPM Hydraulic power sources, not included, sell for $7,320.00. All prices are FOB North Wilkesboro, NC 28659. For questions please send an email to [email protected] or call 1-800-626-2282, ask to speak with Brian Hege. To place an order please call 1-800-626-2282, ask to speak with Brian Hege.

Meadows 16' 3 Strand Log Deck w/Drive

Meadows 5 HP Small Blower with Electric Motor

Hyd reservoir with oil cooler, approx 20 gal, good working condition