Sawmill Equipment For Sale

The S-Series ServoSensor™ is a complete servo controller installed and interfaced inside an MTS® R-Series platform. It consists of a Servo Controller Module (SCM), driver module (DM) and sensing element (SE) combined inside the sensor head body. MTS® proprietary technology is integrated directly to the SCM. This integration in the SCM provides the ServoSensor™ Controller with very fast displacement measurements and servo control outputs. Hydraulic cylinders can typically be positioned to .001"

This is a robust design for longer operation and performance which means more uptime. This system was designed with ease of use and ease of installation in mind for all varieties of our customers. Call for more information.

This is an in-line electrical monitor for proportional hydraulic valves with on-board electronics. Designed to monitor those voltages which can affect the control of proportional hydraulic valves in a hydraulic system. Please call for more information. TESTIMONIAL:I am the Operations Manager at GPM Hydraulic Consulting and we have been using the Model PVT-02 proportional valve tester to troubleshoot proportional valves for our customers for many years now. We have purchased test boxes for all of our Consultants to use in the field when troubleshooting. This test box has saved us hours of troubleshooting and in return saved our customers hours of downtime. The box is connected in a series so you can observe the supply voltage, command signal and LVDT (linear variable differential transformer) feedback from the proportional valve while the system is running normally. You can also use the box instead of the PLC to drive the valve to see if the problem is the controller or valve itself. If you have proportional valves, you need to get one of these test boxes. Without the box to troubleshoot, your valves may get changed when there is nothing wrong with them. This box is also very affordable, a lot cheaper than what a proportional valve costs. Last year I went on a consult for a company that made floor panels for BMW. A proportional valve is what controlled the press opening and closing but the press would not move. I connected the test box to their valve in series to watch the power supply, command and feed back voltages. When a command was given to lower the press, a power supply voltage of 22.6 volts was supplied to drive the valve amplifier. Normally the voltage should be 24 volts however, 22.6 was within the acceptable limits of operating the amplifier. The command voltage applied was 3.5 volts. The LVDT feedback voltage should have been 3.5 however, it was reading near 0 at .4 volts. This indicated that the main spool did not move. We then move the selector switch to drive the valve with the box. The voltage was increased to 10-volt manually. The LVDT feedback continued to read .4 volts indicating that the pilot valve shifted but the main spool did not. We removed the valve assembly and found that contamination had caused the spool to stick.

Peerless Chip Bin MOD 14

Peerless 21 unit chip bin, ready to load

Peerless 21 unit chip bin, ready to load

SEVERAL CHIP BINS

PEERLESS MONO 21 UNIT MATERIAL CHIP BINChip Bin main components: -- Bin with 21 Unit (4,200 cubic feet) capacity. -- Hydraulic power unit. -- Steel support structure. -- Clamshell-type material discharge doors. -- Price shown includes dismantling & loading onto trucks.

Pendu 6800 Scragg Mill Line Shaft Ready Out and Ready to Ship.

Pendu 3000 Inline Slitter Saw w/Extra Blades

Pendu 6800 Enddogging Scragg Mill w/30" Saw Blades, 30" x 20' 8" Waste Belt Conveyor, Controls, 50HP Hydraulic Power Pack, Pendu 50" x 10' 3 Strand Log Deck w/Even Ender

Pendu 52" Log Merchandising Saw Model 1300 Chop Saw 60 HP Main Motor 18" Max material capacity Holding Clamps: Spring Loaded No infeed or outfield deck included Available approx June 1, 2025

Selling as a complete package: Pendu Sharp Chain Scragg (2) 100 HP Motors with soft starts Infeed System Log turner Operator Cab All controls and electrical (2) Log Decks: 3-Strand and 4-Strand Pendu bark conveyor: 30'4" Long with 180 degree tail section, 17" flights 2" high, flights spaced 18-3/4" apart Barn Sweep: Elevated conveyor: 25'4 Long, (2) Hold downs with idlers, chain has 17" flights that are 2" high, leg brackets, Approx 90' of Barn Sweep conveyor with chain and drive motor

unscrambler/ infeed deck, 4 strand deck, 10' wide x 15' long, all hyd drive, heavy duty and in good working condition

roll case, 34" overall width, 8-1/2" x 24" rollers x 23' long, includes hyd powered kickers, hyd drive, heavy duty and in excellent condition

Includes infeed, outfeed with adjustable air stops, and cab with controls. Cutting cap. 9? x 12?

4300 Pendu Gang Saw with 4400 Pendu Stacker. Located in MI. #C969

PENDU - 3800, ...Stake PointerPENDU's "High-Speed Stake Pointer" is designed for high volume production of surveying & agricultural pencil point stakes.Includes: Hopper fed material size range from 3/4" - 2 1/2" square or rectangular material and 16" - 72" in length. -- Equipped with: Aluminum housing round cutterhead with: Replaceable knives; powered by a 10 HP - 3,600 RPM motor; shaving the end of the stakes to a pencil point. -- Automatic feed via: 3 HP Variable speed electric drive; outfeed for pointed stakes on (6) arm staging station; pneumatic clamping to secure part during cutting. -- Complete with: Fabricated steel construction; chip shield with dust shroud for chip extraction; pre-wired Operator Control Console.Unit is capable of producing up to (2,700) stakes/Hr.

2010 Pendu 6800 Scragg. Located in WI. #C925

Pendu 4400S Board Stackers are the perfect combination of speed and performance. Designed to efficiently stack boards at rates up to 4000 boards per hour, the 4400S produces neat stacks up to 48? wide by 50? high by 72? long. And every 4400S comes with the features you want – like a control panel with manual override, variable feed speed, heavy-duty frame construction, hydraulic scissors lift, and side safety shields. All in all, it’s the one piece of equipment to build your entire system around. WILL NOT STACK NOTCHED STRINGERS